Overview of materials for Fluorocarbon ETFE/ECTFE, Molded/Extruded

Overview of materials for Fluorocarbon ETFE/ECTFE, Molded/Extruded 物性表: Overview of materials for Fluorocarbon ETFE/ECTFE, Molded/Extruded物性表及特性介绍,Overview of materials for Fluorocarbon ETFE/ECTFE, Molded/Extruded注塑参数详情,如需Overview of materials for Fluorocarbon ETFE/ECTFE, Molded/Extruded下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.18
  • 吸水率 [%]: 0.01
  • 弯曲强度 [MPa]: 30.0
 
Physical PropertiesMetricEnglishComments
Density 1.18 - 1.77 g/cc0.0427 - 0.0640 lb/in³Average value: 1.66 g/cc Grade Count:7
Water Absorption 0.0100 - 0.0300 %0.0100 - 0.0300 %Average value: 0.0240 % Grade Count:5
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore D 62.0 - 75.062.0 - 75.0Average value: 69.8 Grade Count:4
Tensile Strength, Ultimate 30.0 - 48.0 MPa4350 - 6960 psiAverage value: 38.2 MPa Grade Count:6
Elongation at Break 50.0 - 510 %50.0 - 510 %Average value: 278 % Grade Count:6
Modulus of Elasticity 0.500 - 1.65 GPa72.5 - 240 ksiAverage value: 1.23 GPa Grade Count:4
Coefficient of Friction 0.200 - 1.600.200 - 1.60Average value: 0.580 Grade Count:4
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+14 - 1.00e+17 ohm-cm1.00e+14 - 1.00e+17 ohm-cmAverage value: 7.50e+16 ohm-cm Grade Count:4
Dielectric Constant 2.50 - 2.602.50 - 2.60Average value: 2.58 Grade Count:5
Dielectric Strength 19.7 - 197 kV/mm500 - 5000 kV/inAverage value: 96.8 kV/mm Grade Count:7
Dissipation Factor 0.000600 - 0.01000.000600 - 0.0100Average value: 0.00335 Grade Count:4
Arc Resistance 120 sec120 secAverage value: 120 sec Grade Count:3
 
Thermal PropertiesMetricEnglishComments
CTE, linear 94.0 - 130 µm/m-°C52.2 - 72.2 µin/in-°FAverage value: 108 µm/m-°C Grade Count:6
Thermal Conductivity 0.150 - 0.216 W/m-K1.04 - 1.50 BTU-in/hr-ft²-°FAverage value: 0.179 W/m-K Grade Count:3
Melting Point 240 - 271 °C464 - 520 °FAverage value: 255 °C Grade Count:6
Maximum Service Temperature, Air 149 - 180 °C300 - 356 °FAverage value: 161 °C Grade Count:6
Flammability, UL94 V-0V-0Grade Count:3

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-43171.html

免责声明: 本文 Overview of materials for Fluorocarbon ETFE/ECTFE, Molded/Extruded 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4