Zotefoams ZOTEK® F OSU Rigid PVDF Foam

Zotefoams ZOTEK® F OSU Rigid PVDF Foam 物性表: Zotefoams ZOTEK® F OSU Rigid PVDF Foam物性表及特性介绍,Zotefoams ZOTEK® F OSU Rigid PVDF Foam注塑参数详情,如需Zotefoams ZOTEK® F OSU Rigid PVDF Foam下载, 可到相关下载区下载
  • 密度 [g/cm3]: 0.074
 
Physical PropertiesMetricEnglishComments
Density 0.0740 g/cc0.00267 lb/in³ISO 845
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength 1.00 MPa145 psiISO 1798
Elongation at Break 90 %90 %
Compressive Yield Strength 0.150 MPa
@Strain 25.0 %
21.8 psi
@Strain 25.0 %
ISO 7214
Compression Set 20 %
@Time 79200 sec,
Strain 50.0 %
20 %
@Time 22.0 hour,
Strain 50.0 %
0.5 hr recovery; ISO 7214
 
Thermal PropertiesMetricEnglishComments
Thermal Conductivity 0.0323 W/m-K0.224 BTU-in/hr-ft²-°Fmean temp of 0°C; ISO 8301
 0.0369 W/m-K0.256 BTU-in/hr-ft²-°Fmean temp of 50°C; ISO 8301
 0.0416 W/m-K0.289 BTU-in/hr-ft²-°Fmean temp of 83°C; ISO 8301
Maximum Service Temperature, Air 157 °C315 °F
 
Descriptive Properties
FlammabilityHeat Release: FAR/CS 25.853, 2 min totalPass at 13 mm
 Heat Release: FAR/CS 25.853, PeakPass at 13 mm
 Radiant Heat Panel: FAR 25.856Pass at 3, 13, and 25 mm
 Smoke Density: ABD0031Pass at 13 mm
 Smoke Density: FAR/CS 25.853Pass at 13 mm
 Toxic Gas Emission: ABD0031Pass at 13 mm
 Vertical Burner (60 sec): FAR/CS 25.853Pass at 25 mm

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-43538.html

免责声明: 本文 Zotefoams ZOTEK® F OSU Rigid PVDF Foam 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4