Overview of materials for Polytetrafluoroethylene (PTFE), Conductive Carbon Filled

Overview of materials for Polytetrafluoroethylene (PTFE), Conductive Carbon Filled 物性表: Overview of materials for Polytetrafluoroethylene (PTFE), Conductive Carbon Filled物性表及特性介绍,Overview of materials for Polytetrafluoroethylene (PTFE), Conductive Carbon Filled注塑参数详情,如需Overview of materials for Polytetrafluoroethylene (PTFE), Conductive Carbon Filled下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.9
  • 弯曲强度 [MPa]: 8.0
 
Physical PropertiesMetricEnglishComments
Density 1.90 - 2.19 g/cc0.0686 - 0.0791 lb/in³Average value: 2.10 g/cc Grade Count:20
Apparent Bulk Density 0.390 - 0.770 g/cc0.0141 - 0.0278 lb/in³Average value: 0.603 g/cc Grade Count:11
Linear Mold Shrinkage 0.0200 - 0.0450 cm/cm0.0200 - 0.0450 in/inAverage value: 0.0272 cm/cm Grade Count:12
Deformation 2.50 - 14.0 %2.50 - 14.0 %Average value: 7.29 % Grade Count:6
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore D 52.0 - 70.052.0 - 70.0Average value: 63.3 Grade Count:18
Tensile Strength, Ultimate 8.00 - 39.0 MPa1160 - 5660 psiAverage value: 17.0 MPa Grade Count:18
Elongation at Break 30.0 - 350 %30.0 - 350 %Average value: 150 % Grade Count:20
Compressive Yield Strength 7.00 - 23.4 MPa1020 - 3400 psiAverage value: 11.7 MPa Grade Count:7
Shear Strength 14.479 - 19.3053 MPa
@Temperature 26.7 - 149 °C
2100.0 - 2800.00 psi
@Temperature 80.0 - 300 °F
Average value: 16.9 MPa Grade Count:1
Coefficient of Friction 0.0600 - 0.2400.0600 - 0.240Average value: 0.0977 Grade Count:13
Coefficient of Friction, Static 0.0500 - 0.2000.0500 - 0.200Average value: 0.0913 Grade Count:8
K (wear) Factor 12.0 - 60.4 x 10-8 mm³/N-M5.96 - 30.0 x 10-10 in³-min/ft-lb-hrAverage value: 26.4 x 10-8 mm³/N-M Grade Count:6
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1000 - 1.00e+11 ohm-cm1000 - 1.00e+11 ohm-cmAverage value: 1.25e+10 ohm-cm Grade Count:8
Surface Resistance 1000 - 1.00e+12 ohm1000 - 1.00e+12 ohmAverage value: 3.33e+11 ohm Grade Count:3
 
Thermal PropertiesMetricEnglishComments
CTE, linear 65.0 - 160 µm/m-°C36.1 - 88.9 µin/in-°FAverage value: 121 µm/m-°C Grade Count:12
 90.0 - 140 µm/m-°C
@Temperature 30.0 - 300 °C
50.0 - 77.8 µin/in-°F
@Temperature 86.0 - 572 °F
Average value: 113 µm/m-°C Grade Count:2
Thermal Conductivity 0.590 - 0.800 W/m-K4.09 - 5.55 BTU-in/hr-ft²-°FAverage value: 0.643 W/m-K Grade Count:6
Maximum Service Temperature, Air 260 - 300 °C500 - 572 °FAverage value: 263 °C Grade Count:12
Minimum Service Temperature, Air -200 °C-328 °FAverage value: -200 °C Grade Count:6

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-43553.html

免责声明: 本文 Overview of materials for Polytetrafluoroethylene (PTFE), Conductive Carbon Filled 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4