Quadrant EPP Fluorosint® HPV PTFE + additives, bearing grade, compression moulded (ISO Data)

Quadrant EPP Fluorosint® HPV PTFE + additives, bearing grade, compression moulded (ISO Data) 物性表: Quadrant EPP Fluorosint® HPV PTFE + additives, bearing grade, compression moulded (ISO Data)物性表及特性介绍,Quadrant EPP Fluorosint® HPV PTFE + additives, bearing grade, compression moulded (ISO Data)注塑参数详情,如需Quadrant EPP Fluorosint® HPV PTFE + additives, bearing grade, compression moulded (ISO Data)下载, 可到相关下载区下载
  • 密度 [g/cm3]: 2.06
  • 吸水率 [%]: 0.5
  • 断裂伸长率 [%]: 18.0
  • 硬度: 45.0
 
Physical PropertiesMetricEnglishComments
Density 2.06 g/cc0.0744 lb/in³ISO 1183-1
Moisture Absorption at Equilibrium 0.10 - 0.20 %0.10 - 0.20 %50% RH
Water Absorption at Saturation 0.50 - 1.0 %0.50 - 1.0 %
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell R 4545ISO 2039-2
Hardness, Shore D 6464
Ball Indentation Hardness 45.0 MPa6530 psiISO 2039-1
Tensile Strength 10.0 MPa1450 psiat Yield; ISO 527-1/-2
Elongation at Break >= 50 %>= 50 %ISO 527-1/-2
Elongation at Yield 6.0 %6.0 %ISO 527-1/-2
Tensile Modulus 1.20 GPa174 ksiISO 527-1/-2
Flexural Yield Strength 18.0 MPa2610 psi
Compressive Strength  10.0 MPa
@Strain 1 %
1450 psi
@Strain 1 %
ISO 604
 14.5 MPa
@Strain 2 %
2100 psi
@Strain 2 %
ISO 604
 19.0 MPa
@Strain 5 %
2760 psi
@Strain 5 %
ISO 604
K Factor (ISO) 2.5 µm/km2.5 µm/km
Charpy Impact Unnotched 5.50 J/cm²26.2 ft-lb/in²ISO 179-1/1eU
Charpy Impact, Notched 1.20 J/cm²5.71 ft-lb/in²ISO 179-1/1eA
Coefficient of Friction, Dynamic 0.20 - 0.300.20 - 0.30
Limiting Pressure Velocity 0.250 MPa-m/sec7140 psi-ft/minat 1 m/s unlubricated
 0.400 MPa-m/sec11400 psi-ft/minat 0.1 m/s unlubricated
 
Electrical PropertiesMetricEnglishComments
Surface Resistivity per Square >= 1.0e+13 ohm>= 1.0e+13 ohmIEC 60093
 
Thermal PropertiesMetricEnglishComments
CTE, linear 75.0 µm/m-°C
@Temperature 23.0 - 100 °C
41.7 µin/in-°F
@Temperature 73.4 - 212 °F
Melting Point 327 °C621 °FDSC, 10°C/min.; ISO 11357-1/-3
Maximum Service Temperature, Air 260 °C500 °FContinuous
Deflection Temperature at 1.8 MPa (264 psi) 80.0 °C176 °FISO 75-1/-2
Flammability, UL94 V-0V-0
Oxygen Index >= 95 %>= 95 %ISO 4589-1/-2
 
Compliance PropertiesMetricEnglishComments
3A-Dairy NoNo
European Food 1935/2004 NoNo
FDA YesYes
USP Class VI NoNo
 
Chemical Resistance PropertiesMetricEnglishComments
Acids, Strong (pH 1-3) AcceptableAcceptable
Acids, Weak AcceptableAcceptable
Alcohols AcceptableAcceptable
Alkalies, Strong (pH 11-14) UnacceptableUnacceptable
Alkalies, Weak AcceptableAcceptable
Chlorinated Solvents AcceptableAcceptable
Continuous Sunlight AcceptableAcceptable
Hot Water / Steam LimitedLimited
Hydrocarbons - Aliphatic AcceptableAcceptable
Hydrocarbons - Aromatic AcceptableAcceptable
Inorganic Salt Solutions AcceptableAcceptable
Ketones, Esters AcceptableAcceptable

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-43561.html

免责声明: 本文 Quadrant EPP Fluorosint® HPV PTFE + additives, bearing grade, compression moulded (ISO Data) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4