Arlon AD600 PTFE/Woven Fiberglass/Ceramic Filled Laminate for Microwave Printed Circuit Boards

Arlon AD600 PTFE/Woven Fiberglass/Ceramic Filled Laminate for Microwave Printed Circuit Boards 物性表: Arlon AD600 PTFE/Woven Fiberglass/Ceramic Filled Laminate for Microwave Printed Circuit Boards物性表及特性介绍,Arlon AD600 PTFE/Woven Fiberglass/Ceramic Filled Laminate for Microwave Printed Circuit Boards注塑参数详情,如需Arlon AD600 PTFE/Woven Fiberglass/Ceramic Filled Laminate for Microwave Printed Circuit Boards下载, 可到相关下载区下载
  • 密度 [g/cm3]: 2.45
 
Physical PropertiesMetricEnglishComments
Density 2.45 g/cc0.0885 lb/in³ASTM D792 Method A
Outgassing - Total Mass Loss  0.00 %
@Pressure <=1.33e-10 MPa,
Temperature 125 °C
0.00 %
@Pressure <=1.93e-8 psi,
Temperature 257 °F
Water Vapor Recovered; NASA SP-R-0022A
 0.010 %
@Pressure <=1.33e-10 MPa,
Temperature 125 °C
0.010 %
@Pressure <=1.93e-8 psi,
Temperature 257 °F
Collected Volatiles; NASA SP-R-0022A
 0.020 %
@Pressure <=1.33e-10 MPa,
Temperature 125 °C
0.020 %
@Pressure <=1.93e-8 psi,
Temperature 257 °F
NASA SP-R-0022A
 
Mechanical PropertiesMetricEnglishComments
Peel Strength 2.10 kN/m12.0 pliAfter Thermal Stress; IPC TM-650 2.4.8
 
Electrical PropertiesMetricEnglishComments
Dielectric Constant  5.5
@Thickness 0.140 mm
5.5
@Thickness 0.00550 in
 6.3
@Thickness 3.81 mm
6.3
@Thickness 0.150 in
 6.15
@Thickness 0.381 mm,
Frequency 1.00e+6 Hz
6.15
@Thickness 0.0150 in,
Frequency 1.00e+6 Hz
C23/50; IPC TM-650 2.5.5.3
Dissipation Factor 0.0030
@Frequency 1.00e+6 Hz
0.0030
@Frequency 1.00e+6 Hz
C23/50; IPC TM-650 2.5.5.3
Arc Resistance >= 180 sec>= 180 secD48/50; ASTM D495
 
Thermal PropertiesMetricEnglishComments
CTE, linear  10.0 µm/m-°C
@Temperature 0.000 - 100 °C
5.56 µin/in-°F
@Temperature 32.0 - 212 °F
y direction; IPC TM-650 2.4.24
 11.0 µm/m-°C
@Temperature 0.000 - 100 °C
6.11 µin/in-°F
@Temperature 32.0 - 212 °F
x direction; IPC TM-650 2.4.24
CTE, linear, Transverse to Flow 45.0 µm/m-°C
@Temperature 0.000 - 100 °C
25.0 µin/in-°F
@Temperature 32.0 - 212 °F
z direction; IPC TM-650 2.4.24
Thermal Conductivity 0.460 W/m-K
@Temperature 100 °C
3.19 BTU-in/hr-ft²-°F
@Temperature 212 °F
ASTM E1225
Flammability, UL94 V-0V-0Vertical Burn

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-43618.html

免责声明: 本文 Arlon AD600 PTFE/Woven Fiberglass/Ceramic Filled Laminate for Microwave Printed Circuit Boards 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4