- 密度 [g/cm3]: 2.1
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 2.10 - 2.18 g/cc | 0.0759 - 0.0788 lb/in³ | BS2782:Pt6 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | 65 - 67 | 65 - 67 | ASTM D2240 | ||
| Tensile Strength | 13.5 - 25.0 MPa | 1960 - 3630 psi | Moulding Direction; BS2782:Pt3 | ||
| Elongation at Break | 120 - 250 % | 120 - 250 % | Moulding Direction; BS2782:Pt3 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | ASTM D257 | ||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | ASTM D257 | ||
| Thermal Properties | Metric | English | Comments | ||
| Thermal Conductivity | 0.780 W/m-K | 5.41 BTU-in/hr-ft²-°F | Moulding Direction; ASTM C177 | ||
| Melting Point | 327 °C | 621 °F | ASTM D3417 | ||
| Maximum Service Temperature, Air | 260 °C | 500 °F | |||
| 300 °C | 572 °F | Short Periods | |||
| Minimum Service Temperature, Air | -200 °C | -328 °F | |||
| Flash Point | 630 °C | 1170 °F | ASTM D1929 | ||
| Descriptive Properties | |||||
| Color | Dark Grey | ||||