- 密度 [g/cm3]: 3.8
- 缺口冲击强度: 10.0
- 弯曲强度 [MPa]: 13.7
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 3.80 - 4.00 g/cc | 0.137 - 0.145 lb/in³ | ASTM D792 |
| Deformation | 1.0 - 1.1 % @Temperature 150 °C, Time 86400 sec, Pressure 0.981 MPa | 1.0 - 1.1 % @Temperature 302 °F, Time 24.0 hour, Pressure 142 psi | total |
| 1.5 - 2.0 % @Temperature 23.0 °C, Time 86400 sec, Pressure 13.7 MPa | 1.5 - 2.0 % @Temperature 73.4 °F, Time 24.0 hour, Pressure 1990 psi | permanent; ASTM D621 | |
| 3.7 - 4.8 % @Temperature 23.0 °C, Time 86400 sec, Pressure 13.7 MPa | 3.7 - 4.8 % @Temperature 73.4 °F, Time 24.0 hour, Pressure 1990 psi | total; ASTM D621 | |
| 9.0 - 10 % @Temperature 150 °C, Time 86400 sec, Pressure 4.90 MPa | 9.0 - 10 % @Temperature 302 °F, Time 24.0 hour, Pressure 711 psi | total | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 65 - 70 | 65 - 70 | ASTM D2240 |
| Tensile Strength, Ultimate | 13.7 - 21.6 MPa | 1990 - 3130 psi | ASTM D638 |
| Elongation at Break | 110 - 220 % | 110 - 220 % | ASTM D638 |
| Compressive Strength | 10.3 - 10.8 MPa | 1490 - 1560 psi | 1% Deformation; ASTM D695 |
| Izod Impact, Notched (ISO) | 10.0 - 11.0 kJ/m² | 4.76 - 5.23 ft-lb/in² | ASTM D256 |
| Coefficient of Friction | 0.13 | 0.13 | |
| Coefficient of Friction, Static | 0.070 | 0.070 | |
| Limiting Pressure Velocity | 0.004905 - 0.005232 MPa-m/sec | 140.0 - 149.4 psi-ft/min | 3 m/min |
| 0.0063765 - 0.00654 MPa-m/sec | 182.05 - 187 psi-ft/min | 30 m/min | |
| 0.0073575 - 0.0089925 MPa-m/sec | 210.06 - 256.74 psi-ft/min | 300 m/min | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | >= 1.00e+7 ohm-cm | >= 1.00e+7 ohm-cm | ASTM D257 |
| Surface Resistance | >= 1.00e+9 ohm | >= 1.00e+9 ohm | 50% rel. humidity; ASTM D257 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 75.0 - 90.0 µm/m-°C @Temperature 25.0 - 100 °C | 41.7 - 50.0 µin/in-°F @Temperature 77.0 - 212 °F | ASTM D696 |
| 100 - 115 µm/m-°C @Temperature 25.0 - 200 °C | 55.6 - 63.9 µin/in-°F @Temperature 77.0 - 392 °F | ASTM D696 | |
| 130 - 140 µm/m-°C @Temperature 25.0 - 300 °C | 72.2 - 77.8 µin/in-°F @Temperature 77.0 - 572 °F | ASTM D696 | |
| Thermal Conductivity | 0.711 - 0.837 W/m-K | 4.93 - 5.80 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 270 °C | 518 °F | continuous |
| Minimum Service Temperature, Air | -260 °C | -436 °F | |