Overview of materials for Nylon 66/Nylon 6 Blend, Glass Fiber Filled

Overview of materials for Nylon 66/Nylon 6 Blend, Glass Fiber Filled 物性表: Overview of materials for Nylon 66/Nylon 6 Blend, Glass Fiber Filled物性表及特性介绍,Overview of materials for Nylon 66/Nylon 6 Blend, Glass Fiber Filled注塑参数详情,如需Overview of materials for Nylon 66/Nylon 6 Blend, Glass Fiber Filled下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.18
  • 吸水率 [%]: 1.2
  • 缺口冲击强度: 0.9
  • 断裂伸长率 [%]: 120
  • 弯曲强度 [MPa]: 85.0
  • 弯曲模量 [MPa]: 3.80
 
Physical PropertiesMetricEnglishComments
Density 1.18 - 1.50 g/cc0.0426 - 0.0542 lb/in³Average value: 1.32 g/cc Grade Count:6
Water Absorption 1.20 %1.20 %Average value: 1.20 % Grade Count:3
Linear Mold Shrinkage 0.00200 - 0.0120 cm/cm0.00200 - 0.0120 in/inAverage value: 0.00650 cm/cm Grade Count:4
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 85.0 - 179 MPa12300 - 26000 psiAverage value: 126 MPa Grade Count:5
Elongation at Break 3.00 - 5.00 %3.00 - 5.00 %Average value: 3.63 % Grade Count:6
Flexural Yield Strength 120 - 240 MPa17400 - 34800 psiAverage value: 180 MPa Grade Count:5
Flexural Modulus 3.80 - 9.31 GPa551 - 1350 ksiAverage value: 6.42 GPa Grade Count:6
Izod Impact, Notched 0.900 - 1.50 J/cm1.69 - 2.81 ft-lb/inAverage value: 1.18 J/cm Grade Count:4
Charpy Impact Unnotched 4.00 - 4.00 J/cm²
@Temperature -20.0 - -20.0 °C
19.0 - 19.0 ft-lb/in²
@Temperature -4.00 - -4.00 °F
Average value: 4.00 J/cm² Grade Count:1
Charpy Impact, Notched 0.300 - 0.300 J/cm²
@Temperature -20.0 - -20.0 °C
1.43 - 1.43 ft-lb/in²
@Temperature -4.00 - -4.00 °F
Average value: 0.300 J/cm² Grade Count:1
 
Thermal PropertiesMetricEnglishComments
Melting Point 235 - 262 °C455 - 504 °FAverage value: 247 °C Grade Count:3
Deflection Temperature at 1.8 MPa (264 psi) 200 - 245 °C392 - 473 °FAverage value: 222 °C Grade Count:6
Flammability, UL94 HBHBGrade Count:5
 
Processing PropertiesMetricEnglishComments
Melt Temperature 250 - 310 °C482 - 590 °FAverage value: 287 °C Grade Count:3
Mold Temperature 70.0 - 93.3 °C158 - 200 °FAverage value: 81.5 °C Grade Count:3
Drying Temperature 79.4 - 80.0 °C175 - 176 °FAverage value: 79.6 °C Grade Count:3
Moisture Content 0.0500 - 0.200 %0.0500 - 0.200 %Average value: 0.150 % Grade Count:3
Injection Pressure 34.5 - 138 MPa5000 - 20000 psiAverage value: 89.1 MPa Grade Count:3

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-44273.html

免责声明: 本文 Overview of materials for Nylon 66/Nylon 6 Blend, Glass Fiber Filled 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4