- 密度 [g/cm3]: 1.09
- 吸水率 [%]: 1.35
- 缺口冲击强度: 7.0
- 拉伸强度 [MPa]: 60.0
- 弯曲模量 [MPa]: 2.00
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.09 g/cc | 0.0394 lb/in³ | ISO 1183/A | ||
| Water Absorption | 1.35 % @Temperature 23.0 °C, Time 86400 sec | 1.35 % @Temperature 73.4 °F, Time 24.0 hour | ISO 62 | ||
| Linear Mold Shrinkage | 0.0107 cm/cm | 0.0107 in/in | Isotropy | ||
| Linear Mold Shrinkage, Flow | 0.022 cm/cm | 0.022 in/in | |||
| Linear Mold Shrinkage, Transverse | 0.0205 cm/cm | 0.0205 in/in | |||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 50.0 MPa | 7250 psi | ISO 527 Type 1A | ||
| Tensile Strength, Yield | 60.0 MPa | 8700 psi | ISO 527 type 1 A | ||
| Elongation at Break | 50 % | 50 % | ISO 527 Type 1A | ||
| Elongation at Yield | 5.0 % | 5.0 % | ISO 527 type 1 A | ||
| Tensile Modulus | 2.30 GPa | 334 ksi | ISO 527 Type 1A | ||
| Flexural Strength | 80.0 MPa | 11600 psi | ISO 178 | ||
| Flexural Modulus | 2.00 GPa | 290 ksi | ISO 178 | ||
| Izod Impact, Notched (ISO) | 7.00 kJ/m² | 3.33 ft-lb/in² | ISO 180/1eA | ||
| Charpy Impact Unnotched | NB | NB | ISO 179/1eU | ||
| Charpy Impact, Notched | 0.800 J/cm² | 3.81 ft-lb/in² | ISO 179/1eA | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | IEC 60093 | ||
| Surface Resistance | 5.00e+13 ohm | 5.00e+13 ohm | IEC 60093 | ||
| Dielectric Strength | 32.0 kV/mm | 813 kV/in | IEC 60243 | ||
| Dissipation Factor | 0.070 | 0.070 | IEC 60250 | ||
| Comparative Tracking Index | 475 V | 475 V | Solution B; IEC 60112 | ||
| 500 V | 500 V | Solution A; IEC 60112 | |||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 70.0 µm/m-°C @Temperature 23.0 - 85.0 °C | 38.9 µin/in-°F @Temperature 73.4 - 185 °F | ISO 11359 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 62.0 °C | 144 °F | ISO 75/Af | ||
| Flammability, UL94 | HB @Thickness 1.60 mm | HB @Thickness 0.0630 in | 1210 | ||
| Oxygen Index | 21 % | 21 % | ISO 4589 | ||
| Processing Properties | Metric | English | Comments | ||
| Feed Temperature | 240 - 250 °C | 464 - 482 °F | |||
| Front Barrel Temperature | 260 - 270 °C | 500 - 518 °F | |||
| Melt Temperature | 242 °C | 468 °F | ISO 11357 | ||
| Mold Temperature | 60.0 - 80.0 °C | 140 - 176 °F | |||
| Drying Temperature | 80.0 °C | 176 °F | |||
| Moisture Content | <= 0.20 % | <= 0.20 % | |||
| Descriptive Properties | |||||
| Compression Zone | 250-260°C | ||||