- 密度 [g/cm3]: 1.77
- 吸水率 [%]: 4.5
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.77 g/cc | 0.0639 lb/in³ | (DAM); ISO 1183 | ||
Water Absorption | 4.5 % | 4.5 % | DAM; Sim. to ISO 62 | ||
Moisture Absorption at Equilibrium | 1.3 % | 1.3 % | Humidity Absorption (DAM); Sim. to ISO 62 | ||
Linear Mold Shrinkage, Flow | 0.0030 cm/cm | 0.0030 in/in | DAM; ISO 294-4 | ||
0.0090 cm/cm | 0.0090 in/in | DAM; ISO 294-4 | |||
Mechanical Properties | Metric | English | Comments | ||
Tensile Strength at Break | 130 MPa | 18900 psi | ISO 527-1/-2 | ||
Elongation at Break | 2.5 % | 2.5 % | ISO 527-1/-2 | ||
Tensile Modulus | 12.0 GPa | 1740 ksi | ISO 527-1/-2 | ||
Charpy Impact Unnotched | 7.00 J/cm² @Temperature 23.0 °C | 33.3 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eU | ||
Charpy Impact, Notched | 1.20 J/cm² @Temperature -30.0 °C | 5.71 ft-lb/in² @Temperature -22.0 °F | ISO 179/1eA | ||
1.40 J/cm² @Temperature 23.0 °C | 6.66 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eA | |||
Tensile Creep Modulus, 1000 hours | 9500 MPa | 1.38e+6 psi | ISO 899-1 | ||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | 1.00e+10 ohm-cm | 1.00e+10 ohm-cm | IEC 60093 | ||
Surface Resistance | 1.00e+14 ohm | 1.00e+14 ohm | IEC 60093 | ||
Dielectric Strength | 20.0 kV/mm | 508 kV/in | IEC 60243-1 | ||
Comparative Tracking Index | 250 - 399 V | 250 - 399 V | PLC 2; UL 746A | ||
350 V | 350 V | IEC 60112 | |||
Thermal Properties | Metric | English | Comments | ||
Melting Point | 295 °C | 563 °F | 10°C/min (DAM); ISO 11357-1/-3 | ||
UL RTI, Electrical | 140 °C @Thickness 1.50 mm | 284 °F @Thickness 0.0591 in | UL746B | ||
140 °C @Thickness 0.750 mm | 284 °F @Thickness 0.0295 in | UL746B | |||
UL RTI, Mechanical with Impact | 110 °C @Thickness 0.750 mm | 230 °F @Thickness 0.0295 in | UL746B | ||
125 °C @Thickness 1.50 mm | 257 °F @Thickness 0.0591 in | UL746B | |||
UL RTI, Mechanical without Impact | 120 °C @Thickness 0.750 mm | 248 °F @Thickness 0.0295 in | UL746B | ||
125 °C @Thickness 1.50 mm | 257 °F @Thickness 0.0591 in | UL746B | |||
Descriptive Properties | |||||
Flame Retardant | Yes | ||||
Flame Retarding Agent | Yes | ||||
Heat Stabilized or Stable to Heat | Yes | ||||
Injection Molding | Yes | ||||
Lubricants | Yes | ||||
Platable | Yes | ||||
Release Agent | Yes | ||||
With Fillers | Yes |