塑胶原料之家
  1. 首页
  2. 英文物性
  3. PA46
  4. TP Composites HiFill® PA4/6 M/GF 20 HS 20% Glass/Mineral Filled

TP Composites HiFill® PA4/6 M/GF 20 HS 20% Glass/Mineral Filled

TP Composites HiFill® PA4/6 M/GF 20 HS 20% Glass/Mineral Filled 物性表: TP Composites HiFill® PA4/6 M/GF 20 HS 20% Glass/Mineral Filled物性表及特性介绍,TP Composites HiFill® PA4/6 M/GF 20 HS 20% Glass/Mineral Filled注塑参数详情,如需TP Composites HiFill® PA4/6 M/GF 20 HS 20% Glass/Mineral Filled下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.33
  • 吸水率 [%]: 2.6
  • 缺口冲击强度: 0.587
  • 拉伸强度 [MPa]: 119.0
  • 弯曲模量 [MPa]: 5.03
 
Physical PropertiesMetricEnglishComments
Density 1.33 g/cc0.0480 lb/in³ASTM D792
Water Absorption 2.6 %
@Time 86400 sec		2.6 %
@Time 24.0 hour		ASTM D570
Linear Mold Shrinkage, Flow 0.0050 cm/cm
@Thickness 3.17 mm		0.0050 in/in
@Thickness 0.125 in		ASTM D955
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Yield 119 MPa17200 psiASTM D638
Elongation at Break 3.5 %3.5 %ASTM D638
Flexural Strength 172 MPa25000 psiASTM D790
Flexural Modulus 5.03 GPa730 ksiASTM D790
Izod Impact, Notched 0.587 J/cm
@Thickness 3.17 mm		1.10 ft-lb/in
@Thickness 0.125 in		ASTM D256
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+11 ohm-cm1.00e+11 ohm-cmASTM D257
Dielectric Strength 27.6 kV/mm700 kV/inMethod A (Short-Time); ASTM D149
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 73.8 µm/m-°C41.0 µin/in-°FASTM D696
Deflection Temperature at 1.8 MPa (264 psi) 285 °C545 °FUnannealed; ASTM D648
Flammability, UL94 HBHB

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-44758.html

免责声明: 本文 TP Composites HiFill® PA4/6 M/GF 20 HS 20% Glass/Mineral Filled 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4