- 密度 [g/cm3]: 1.27
- 吸水率 [%]: 1.2
- 缺口冲击强度: 0.534
- 拉伸强度 [MPa]: 58.6
- 断裂伸长率 [%]: 62.1
- 弯曲模量 [MPa]: 1.21
- 硬度: 100.0
- 热变形温度 [℃]: 221.0
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.27 g/cc | 0.0459 lb/in³ | ASTM D792 |
Water Absorption | 1.2 % @Time 86400 sec | 1.2 % @Time 24.0 hour | ASTM D570 |
Mechanical Properties | Metric | English | Comments |
Hardness, Rockwell R | 100 | 100 | ASTM D785 |
Tensile Strength, Yield | 58.6 MPa | 8500 psi | ASTM D638 |
Elongation at Yield | 300 % | 300 % | ASTM D638 |
Flexural Yield Strength | 62.1 MPa | 9000 psi | ASTM D790 |
Flexural Modulus | 1.21 GPa | 175 ksi | ASTM D790 |
Izod Impact, Notched | 0.534 J/cm @Thickness 3.17 mm, Temperature -40.0 °C | 1.00 ft-lb/in @Thickness 0.125 in, Temperature -40.0 °F | ASTM D256 |
2.94 J/cm @Thickness 3.17 mm, Temperature 72.8 °C | 5.50 ft-lb/in @Thickness 0.125 in, Temperature 163 °F | ASTM D256 | |
Izod Impact, Unnotched | NB @Thickness 3.17 mm | NB @Thickness 0.125 in | ASTM D256 |
Electrical Properties | Metric | English | Comments |
Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | ASTM D257 |
Dielectric Strength | 21.7 kV/mm | 550 kV/in | Method A (Short-Time); ASTM D149 |
Thermal Properties | Metric | English | Comments |
CTE, linear, Parallel to Flow | 79.2 µm/m-°C | 44.0 µin/in-°F | ASTM D696 |
Deflection Temperature at 0.46 MPa (66 psi) | 221 °C | 430 °F | Unannealed; ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 160 °C | 320 °F | Unannealed; ASTM D648 |