Asahi Kasei Leona® 1300F Nylon 66

Asahi Kasei Leona® 1300F Nylon 66 物性表: Asahi Kasei Leona® 1300F Nylon 66物性表及特性介绍,Asahi Kasei Leona® 1300F Nylon 66注塑参数详情,如需Asahi Kasei Leona® 1300F Nylon 66下载, 可到相关下载区下载
  • 吸水率 [%]: 2.2
  • 缺口冲击强度: 0.39
  • 拉伸强度 [MPa]: 67.0
  • 弯曲模量 [MPa]: 1.30
  • 硬度: 110.0
  • 热变形温度 [℃]: 240.0
 
Physical PropertiesMetricEnglishComments
Specific Gravity 1.14 g/cc1.14 g/ccDry; ASTM D792
Water Absorption 2.2 %2.2 %Wet
Linear Mold Shrinkage 0.0090 - 0.016 cm/cm0.0090 - 0.016 in/inDry; ASTM D2863
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 6060Wet; ASTM D785
 8585Dry; ASTM D785
Hardness, Rockwell R 110110Wet; ASTM D785
 120120Dry; ASTM D785
Tensile Strength, Yield 67.0 MPa9720 psiWet; ASTM D638
 88.0 MPa12800 psiDry; ASTM D638
Elongation at Break 35 %35 %Dry; ASTM D638
 200 %200 %Wet; ASTM D638
Flexural Strength 59.0 MPa8560 psiWet; ASTM D790
 128 MPa18600 psiDry; ASTM D790
Flexural Modulus 1.30 GPa189 ksiWet; ASTM D790
 3.00 GPa435 ksiDry; ASTM D790
Izod Impact, Notched 0.390 J/cm0.731 ft-lb/inDry; ASTM D256
 1.08 J/cm2.02 ft-lb/inWet; ASTM D256
Taber Abrasion, mg/1000 Cycles 6.06.0Wet; ASTM D1044
 
Thermal PropertiesMetricEnglishComments
CTE, linear 80.0 µm/m-°C
@Temperature 20.0 °C
44.4 µin/in-°F
@Temperature 68.0 °F
Dry; ASTM D696
Specific Heat Capacity 1.67 J/g-°C0.399 BTU/lb-°FDry
Thermal Conductivity 0.200 W/m-K1.39 BTU-in/hr-ft²-°FDry
Deflection Temperature at 0.46 MPa (66 psi) 240 °C464 °FDry; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 75.0 °C167 °FDry; ASTM D648
Flammability, UL94 V-2V-2Dry
Oxygen Index 26 %26 %Dry; ASTM D2863

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-44863.html

免责声明: 本文 Asahi Kasei Leona® 1300F Nylon 66 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4