- 密度 [g/cm3]: 1.27
- 缺口冲击强度: 0.32
- 弯曲强度 [MPa]: 85.0
- 弯曲模量 [MPa]: 5.00
- 硬度: 119.0
- 热变形温度 [℃]: 210.0
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.27 g/cc | 0.0459 lb/in³ | |
Linear Mold Shrinkage | 0.0090 cm/cm | 0.0090 in/in | ASTM D955 |
Mechanical Properties | Metric | English | Comments |
Hardness, Rockwell R | 119 | 119 | ASTM D785 |
Tensile Strength, Ultimate | 85.0 MPa | 12300 psi | ASTM D638 |
Elongation at Break | 5.0 % | 5.0 % | ASTM D638 |
Flexural Strength | 149 MPa | 21600 psi | ASTM D790 |
Flexural Modulus | 5.00 GPa | 725 ksi | ASTM D790 |
Izod Impact, Notched | 0.320 J/cm | 0.599 ft-lb/in | ASTM D256 |
Izod Impact, Unnotched | 3.58 J/cm | 6.71 ft-lb/in | ASTM D256 |
Thermal Properties | Metric | English | Comments |
Melting Point | 255 - 275 °C | 491 - 527 °F | |
Deflection Temperature at 0.46 MPa (66 psi) | 210 °C | 410 °F | ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 200 °C | 392 °F | ASTM D648 |
Processing Properties | Metric | English | Comments |
Processing Temperature | 290 °C | 554 °F | Approximate middle barrel temperature. |