- 密度 [g/cm3]: 1.33
- 缺口冲击强度: 1.71
- 弯曲强度 [MPa]: 145.0
- 弯曲模量 [MPa]: 6.62
- 热变形温度 [℃]: 249.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.33 g/cc | 0.0480 lb/in³ | ISO 1183 | ||
| Linear Mold Shrinkage | 0.0040 cm/cm | 0.0040 in/in | ASTM Data; MD | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 125 MPa | 18100 psi | 0.2 in/min; ASTM Test | ||
| Tensile Strength, Ultimate | 145 MPa | 21000 psi | 5mm/min; ISO 527 | ||
| Elongation at Break | 5.0 % | 5.0 % | 5mm/min; ISO 527 | ||
| 7.0 % | 7.0 % | 0.2 in/min; ASTM Test | |||
| Tensile Modulus | 9.20 GPa | 1330 ksi | 1mm/min; ISO 527 | ||
| Flexural Modulus | 6.62 GPa | 960 ksi | ASTM Test | ||
| 8.50 GPa | 1230 ksi | ISO Data | |||
| Izod Impact, Notched | 1.71 J/cm @Thickness 3.17 mm | 3.20 ft-lb/in @Thickness 0.125 in | ASTM Test | ||
| Izod Impact, Notched (ISO) | 20.0 kJ/m² | 9.52 ft-lb/in² | ISO Test | ||
| Charpy Impact, Notched | 2.10 J/cm² | 9.99 ft-lb/in² | ISO 179 | ||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 257 °C | 495 °F | 10 K/min | ||
| 257 °C | 495 °F | ASTM Test | |||
| Deflection Temperature at 0.46 MPa (66 psi) | 249 °C | 480 °F | ASTM Test | ||
| 260 °C | 500 °F | ISO 75 | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 230 °C | 446 °F | ASTM Test | ||
| 245 °C | 473 °F | ISO 75 | |||
| Descriptive Properties | |||||
| Color | Black | ||||
| Commercial Status | Active America | ||||
| Impact Modified | Yes | ||||
| Primary Processing Technique | Injection Molding | ||||