Clariant Renol PA1SP0019 Nylon 66/PPS Alloy, 20% Glass, 20% Mineral物性表参数

Clariant Renol PA1SP0019 Nylon 66/PPS Alloy, 20% Glass, 20% Mineral

Clariant Renol PA1SP0019 Nylon 66/PPS Alloy, 20% Glass, 20% Mineral 物性表: Clariant Renol PA1SP0019 Nylon 66/PPS Alloy, 20% Glass, 20% Mineral物性表及特性介绍,Clariant Renol PA1SP0019 Nylon 66/PPS Alloy, 20% Glass, 20% Mineral注塑参数详情,如需Clariant Renol PA1SP0019 Nylon 66/PPS Alloy, 20% Glass, 20% Mineral下载, 可到相关下载区下载

缺口冲击强度: 0.534
拉伸强度 [MPa]: 138.0
弯曲模量 [MPa]: 11.0
热变形温度 [℃]: 260.0

Mechanical Properties	Metric	English	Comments

Tensile Strength, Yield	138 MPa	20000 psi	ASTM D638
Flexural Modulus	11.0 GPa	1600 ksi	ASTM D790
Izod Impact, Notched	0.534 - 0.801 J/cm @Temperature 22.8 °C	1.00 - 1.50 ft-lb/in @Temperature 73.0 °F	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	260 - 263 °C	500 - 505 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	254 - 257 °C	490 - 495 °F	ASTM D648

Processing Properties	Metric	English	Comments
Melt Temperature	293 - 316 °C	560 - 600 °F
Mold Temperature	93.3 - 121 °C	200 - 250 °F
Dry Time	<= 4 hour @Temperature 93.3 °C	<= 4 hour @Temperature 200 °F	to ensure moisture content is less than 0.2%
Injection Pressure	4.96 - 8.27 MPa	720 - 1200 psi	Secondary
	8.27 - 13.8 MPa	1200 - 2000 psi	Initial
Back Pressure	0.552 - 0.862 MPa	80.0 - 125 psi
Shot Size	30 - 80 %	30 - 80 %
Screw Speed	60 - 100 rpm	60 - 100 rpm

关键词:
供应
20% Glass
PA66
Clariant Renol PA1SP0019 Nylon 66/PPS Alloy
20% Mineral

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45281.html

免责声明: 本文 Clariant Renol PA1SP0019 Nylon 66/PPS Alloy, 20% Glass, 20% Mineral 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息