DSM Akulon® S223-HM8 (Cond.) 40% Mineral Reinforced, Heat Stabilized Nylon 66 (North America)

DSM Akulon® S223-HM8 (Cond.) 40% Mineral Reinforced, Heat Stabilized Nylon 66 (North America) 物性表: DSM Akulon® S223-HM8 (Cond.) 40% Mineral Reinforced, Heat Stabilized Nylon 66 (North America)物性表及特性介绍,DSM Akulon® S223-HM8 (Cond.) 40% Mineral Reinforced, Heat Stabilized Nylon 66 (North America)注塑参数详情,如需DSM Akulon® S223-HM8 (Cond.) 40% Mineral Reinforced, Heat Stabilized Nylon 66 (North America)下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.48
  • 吸水率 [%]: 5.3
 
Physical PropertiesMetricEnglishComments
Density 1.48 g/cc0.0535 lb/in³(DAM); ISO 1183
Water Absorption 5.3 %5.3 %(DAM); Sim. to ISO 62
Moisture Absorption at Equilibrium 1.4 %1.4 %Humidity Absorption (DAM); Sim. to ISO 62
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 60.0 MPa8700 psiISO 527-1/-2
Elongation at Break 5.5 %5.5 %ISO 527-1/-2
Charpy Impact Unnotched  4.00 J/cm²
@Temperature -30.0 °C
19.0 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eU
 5.00 J/cm²
@Temperature 23.0 °C
23.8 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eU
Charpy Impact, Notched  0.300 J/cm²
@Temperature -30.0 °C
1.43 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eA
 1.00 J/cm²
@Temperature 23.0 °C
4.76 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eA
Tensile Creep Modulus, 1 hour 8500 MPa1.23e+6 psiISO 899-1
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+12 ohm-cm1.00e+12 ohm-cmIEC 60093
Surface Resistance 1.00e+13 ohm1.00e+13 ohmIEC 60093
Dielectric Constant  4.0
@Frequency 1e+6 Hz
4.0
@Frequency 1e+6 Hz
IEC 60250
 10
@Frequency 100 Hz
10
@Frequency 100 Hz
IEC 60250
Dielectric Strength 30.0 kV/mm762 kV/inIEC 60243-1
Dissipation Factor  0.10
@Frequency 1e+6 Hz
0.10
@Frequency 1e+6 Hz
IEC 60250
 0.30
@Frequency 100 Hz
0.30
@Frequency 100 Hz
IEC 60250
Comparative Tracking Index 600 V600 VIEC 60112
 
Thermal PropertiesMetricEnglishComments
Melting Point 260 °C500 °F10°C/min (DAM); ISO 11357-1/-3
 
Descriptive Properties
Heat stabilized or stable to heatYes
Injection MoldingYes
Release agentYes
With fillersYes

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45384.html

免责声明: 本文 DSM Akulon® S223-HM8 (Cond.) 40% Mineral Reinforced, Heat Stabilized Nylon 66 (North America) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4