塑胶原料之家
  1. 首页
  2. 英文物性
  3. PA66
  4. DuPont Performance Polymers Zytel® 101F BKB009 Nylon 66

DuPont Performance Polymers Zytel® 101F BKB009 Nylon 66

DuPont Performance Polymers Zytel® 101F BKB009 Nylon 66 物性表: DuPont Performance Polymers Zytel® 101F BKB009 Nylon 66物性表及特性介绍,DuPont Performance Polymers Zytel® 101F BKB009 Nylon 66注塑参数详情,如需DuPont Performance Polymers Zytel® 101F BKB009 Nylon 66下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.14
  • 缺口冲击强度: 5.0
  • 拉伸强度 [MPa]: 82.0
  • 弯曲模量 [MPa]: 2.80
  • 热变形温度 [℃]: 195.0
 
Physical PropertiesMetricEnglishComments
Density 1.14 g/cc0.0412 lb/in³DAM; ISO 1183
Linear Mold Shrinkage, Flow 0.014 cm/cm
@Thickness 2.00 mm		0.014 in/in
@Thickness 0.0787 in		Parallel; DAM; ISO 294-4
Linear Mold Shrinkage, Transverse 0.013 cm/cm
@Thickness 2.00 mm		0.013 in/in
@Thickness 0.0787 in		Normal; DAM; ISO 294-4
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Yield 82.0 MPa
@Temperature 23.0 °C		11900 psi
@Temperature 73.4 °F		DAM; ISO 527
Elongation at Break 18 %
@Temperature 23.0 °C		18 %
@Temperature 73.4 °F		DAM; nominal; ISO 527
Elongation at Yield 4.5 %
@Temperature 23.0 °C		4.5 %
@Temperature 73.4 °F		DAM; ISO 527
Tensile Modulus 3.10 GPa
@Temperature 23.0 °C		450 ksi
@Temperature 73.4 °F		DAM; ISO 527
Flexural Modulus 2.80 GPa
@Temperature 23.0 °C		406 ksi
@Temperature 73.4 °F		DAM; ISO 178
Izod Impact, Notched (ISO)  5.00 kJ/m²
@Temperature -40.0 °C		2.38 ft-lb/in²
@Temperature -40.0 °F		DAM; ISO 180/1A
 5.50 kJ/m²
@Temperature 23.0 °C		2.62 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 180/1A
Charpy Impact, Notched 0.550 J/cm²
@Temperature 23.0 °C		2.62 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eA
 
Thermal PropertiesMetricEnglishComments
Deflection Temperature at 0.46 MPa (66 psi) 195 °C383 °FDAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 70.0 °C158 °FDAM; ISO 75-1/-2
UL RTI, Electrical  65.0 °C
@Thickness 0.400 mm		149 °F
@Thickness 0.0157 in		DAM; UL 746B
 130 °C
@Thickness 6.00 mm		266 °F
@Thickness 0.236 in		DAM; UL 746B
 130 °C
@Thickness 3.00 mm		266 °F
@Thickness 0.118 in		DAM; UL 746B
 130 °C
@Thickness 0.710 mm		266 °F
@Thickness 0.0280 in		DAM; UL 746B
 130 °C
@Thickness 1.50 mm		266 °F
@Thickness 0.0591 in		DAM; UL 746B
UL RTI, Mechanical with Impact  65.0 °C
@Thickness 0.400 mm		149 °F
@Thickness 0.0157 in		DAM; UL 746B
 75.0 °C
@Thickness 0.710 mm		167 °F
@Thickness 0.0280 in		DAM; UL 746B
 75.0 °C
@Thickness 1.50 mm		167 °F
@Thickness 0.0591 in		DAM; UL 746B
 75.0 °C
@Thickness 3.00 mm		167 °F
@Thickness 0.118 in		DAM; UL 746B
 75.0 °C
@Thickness 6.00 mm		167 °F
@Thickness 0.236 in		DAM; UL 746B
UL RTI, Mechanical without Impact  65.0 °C
@Thickness 0.400 mm		149 °F
@Thickness 0.0157 in		DAM; UL 746B
 85.0 °C
@Thickness 6.00 mm		185 °F
@Thickness 0.236 in		DAM; UL 746B
 85.0 °C
@Thickness 1.50 mm		185 °F
@Thickness 0.0591 in		DAM; UL 746B
 85.0 °C
@Thickness 0.710 mm		185 °F
@Thickness 0.0280 in		DAM; UL 746B
 85.0 °C
@Thickness 3.00 mm		185 °F
@Thickness 0.118 in		DAM; UL 746B
Flammability, UL94  V-2
@Thickness 6.00 mm		V-2
@Thickness 0.236 in		DAM; IEC 60695-11-10
 V-2
@Thickness 1.50 mm		V-2
@Thickness 0.0591 in		DAM; IEC 60695-11-10
 V-2
@Thickness 3.00 mm		V-2
@Thickness 0.118 in		DAM; IEC 60695-11-10
 V-2
@Thickness 0.400 mm		V-2
@Thickness 0.0157 in		DAM; IEC 60695-11-10
 V-2
@Thickness 0.710 mm		V-2
@Thickness 0.0280 in		DAM; IEC 60695-11-10
 V-2
@Thickness 6.00 mm		V-2
@Thickness 0.236 in		DAM; UL94
 V-2
@Thickness 3.00 mm		V-2
@Thickness 0.118 in		DAM; UL94
 V-2
@Thickness 0.710 mm		V-2
@Thickness 0.0280 in		DAM; UL94
 V-2
@Thickness 0.400 mm		V-2
@Thickness 0.0157 in		DAM; UL94
 V-2
@Thickness 1.50 mm		V-2
@Thickness 0.0591 in		DAM; UL94
Glow Wire Test  725 °C
@Thickness 0.710 mm		1340 °F
@Thickness 0.0280 in		DAM; Ignition; IEC 60695-2-13
 750 °C
@Thickness 1.50 mm		1380 °F
@Thickness 0.0591 in		DAM; Ignition; IEC 60695-2-13
 800 °C
@Thickness 3.00 mm		1470 °F
@Thickness 0.118 in		DAM; Ignition; IEC 60695-2-13
 900 °C
@Thickness 0.400 mm		1650 °F
@Thickness 0.0157 in		DAM; Ignition; IEC 60695-2-13
 960 °C
@Thickness 0.400 mm		1760 °F
@Thickness 0.0157 in		DAM; IEC 60695-2-12
 960 °C
@Thickness 0.710 mm		1760 °F
@Thickness 0.0280 in		DAM; IEC 60695-2-12
 960 °C
@Thickness 1.50 mm		1760 °F
@Thickness 0.0591 in		DAM; IEC 60695-2-12
 960 °C
@Thickness 3.00 mm		1760 °F
@Thickness 0.118 in		DAM; IEC 60695-2-12
 
Processing PropertiesMetricEnglishComments
Melt Temperature 262 °C504 °F10°C/min; DAM; ISO 11357-1/-3
 290 °C554 °FDAM; Optimum
 280 - 300 °C536 - 572 °FDAM
Mold Temperature 70.0 °C158 °FDAM; optimum
 50.0 - 90.0 °C122 - 194 °FDAM
Drying Temperature 80.0 °C176 °FDAM
Dry Time 2.00 - 4.00 hour2.00 - 4.00 hourDAM
Moisture Content <= 0.20 %<= 0.20 %DAM
 
Descriptive Properties
AdditiveLubricantDAM
 Mold ReleaseDAM
AppearanceBlack ColorDAM
Drying RecommendedYes, if moisture content of resin exceeds recommended levelDAM
FeaturesChemical Resistance, GoodDAM
 Cycle (Production), FastDAM
 Electrical Properties, GoodDAM
 Fatigue ResistantDAM
 Flow, HighDAM
 Fuel ResistantDAM
 Grease ResistantDAM
 LubricatedDAM
 Mold Release, GoodDAM
 Moldability, GoodDAM
 Molding Cycle, FastDAM
 Molecular Wt., LowDAM
 Oil ResistantDAM
 Processability, GoodDAM
FormsPelletsDAM
GenericNylon 66DAM
Material StatusCurrentDAM
Part Marking Code>PA66<ISO 11469; DAM
Polymer FamilyPolyamideDAM
Polymer TypePA66DAM
Processing MethodInjection MoldingDAM
Product CategoryUnreinforced ResinsDAM
Region Available - GlobalYesDAM
Resin IdentificationPA66ISO 1043; DAM
RoHS ComplianceContact ManufacturerDAM
UsesAppliance ComponentsDAM
 Automotive ApplicationsDAM
 ConnectorsDAM
 Electrical/Electronic ApplicationsDAM
 FastenersDAM

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45425.html

免责声明: 本文 DuPont Performance Polymers Zytel® 101F BKB009 Nylon 66 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4