Ensinger HYDLAR® Z Nylon, Pultruded Aramid Fiber Reinforced (PA)

Ensinger HYDLAR® Z Nylon, Pultruded Aramid Fiber Reinforced (PA) 物性表: Ensinger HYDLAR® Z Nylon, Pultruded Aramid Fiber Reinforced (PA)物性表及特性介绍,Ensinger HYDLAR® Z Nylon, Pultruded Aramid Fiber Reinforced (PA)注塑参数详情,如需Ensinger HYDLAR® Z Nylon, Pultruded Aramid Fiber Reinforced (PA)下载, 可到相关下载区下载
  • 吸水率 [%]: 0.8
  • 缺口冲击强度: 1.44
  • 拉伸强度 [MPa]: 110.0
  • 弯曲模量 [MPa]: 0.621
 
Physical PropertiesMetricEnglishComments
Specific Gravity 1.16 g/cc1.16 g/ccASTM D792
Water Absorption 0.80 %
@Time 86400 sec
0.80 %
@Time 24.0 hour
ASTM D570
Water Absorption at Saturation 6.3 %
@Temperature 22.8 °C
6.3 %
@Temperature 73.0 °F
ASTM D570
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Yield 110 MPa16000 psiASTM D638
Elongation at Break 4.0 %4.0 %ASTM D638
Tensile Modulus 8.96 GPa1300 ksiASTM D638
Flexural Strength 159 MPa23000 psiASTM D790
Flexural Modulus 0.621 GPa90.0 ksiASTM D790
Compressive Strength 133 MPa19300 psiASTM D695
Izod Impact, Notched 1.44 J/cm2.70 ft-lb/inASTM D256
K Factor (Wear Factor) 79 - 12879 - 128ASTM Thrust Washer Test: PV=2,500; P=250 psi; V=10 fpm; ASTM D3702
 
Thermal PropertiesMetricEnglishComments
CTE, linear 28.8 µm/m-°C16.0 µin/in-°FASTM D696
Maximum Service Temperature, Air 149 °C300 °Fcontinuous
Deflection Temperature at 1.8 MPa (264 psi) 243 °C470 °FASTM D648
 
Descriptive Properties
Base MaterialAramid

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45580.html

免责声明: 本文 Ensinger HYDLAR® Z Nylon, Pultruded Aramid Fiber Reinforced (PA) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4