- 吸水率 [%]: 0.8
- 缺口冲击强度: 8.54
- 弯曲模量 [MPa]: 0.758
- 硬度: 107.0
- 热变形温度 [℃]: 218.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.08 g/cc | 1.08 g/cc | ASTM D792 |
| Water Absorption | 0.80 % @Time 86400 sec | 0.80 % @Time 24.0 hour | ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.017 - 0.021 cm/cm @Thickness 3.17 mm | 0.017 - 0.021 in/in @Thickness 0.125 in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 107 | 107 | ASTM D785 |
| Tensile Strength at Break | 34.5 MPa | 5000 psi | Conditioned; ASTM D638 |
| 51.7 MPa | 7500 psi | ASTM D638 | |
| Elongation at Break | 55 % | 55 % | ASTM D638 |
| 200 % | 200 % | Conditioned; ASTM D638 | |
| Flexural Strength | 27.6 MPa | 4000 psi | Conditioned; ASTM D790 |
| 68.3 MPa | 9900 psi | ASTM D790 | |
| Flexural Modulus | 0.758 GPa | 110 ksi | Conditioned; ASTM D790 |
| 1.72 GPa | 250 ksi | ASTM D790 | |
| Izod Impact, Notched | 8.54 J/cm | 16.0 ft-lb/in | ASTM D256 |
| 10.1 J/cm | 19.0 ft-lb/in | Conditioned; ASTM D256 | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | Conditioned; ASTM D257 |
| 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | ASTM D257 | |
| Dielectric Constant | 3.2 @Frequency 100 Hz | 3.2 @Frequency 100 Hz | ASTM D150 |
| 5.5 @Frequency 100 Hz | 5.5 @Frequency 100 Hz | Conditioned; ASTM D150 | |
| Thermal Properties | Metric | English | Comments |
| CTE, linear, Parallel to Flow | 140 µm/m-°C | 78.0 µin/in-°F | ASTM D696 |
| Deflection Temperature at 0.46 MPa (66 psi) | 218 °C | 425 °F | Unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 68.3 °C | 155 °F | Unannealed; ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.50 mm | HB @Thickness 0.0591 in | Conditioned |
| HB @Thickness 1.50 mm | HB @Thickness 0.0591 in | ||
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 277 - 293 °C | 530 - 560 °F | |
| Mold Temperature | 48.9 - 87.8 °C | 120 - 190 °F | |
| Drying Temperature | 73.9 °C @Time 7200 - 14400 sec | 165 °F @Time 2.00 - 4.00 hour | |
| Moisture Content | <= 0.18 % | <= 0.18 % | Suggested Maximum |
| Back Pressure | 0.138 - 0.414 MPa | 20.0 - 60.0 psi | |
| Screw Speed | 40 - 120 rpm | 40 - 120 rpm | |