Ravago Manufacturing Americas Hylon® N1040MGL Nylon 6/6 (DAM)

Ravago Manufacturing Americas Hylon® N1040MGL Nylon 6/6 (DAM) 物性表: Ravago Manufacturing Americas Hylon® N1040MGL Nylon 6/6 (DAM)物性表及特性介绍,Ravago Manufacturing Americas Hylon® N1040MGL Nylon 6/6 (DAM)注塑参数详情,如需Ravago Manufacturing Americas Hylon® N1040MGL Nylon 6/6 (DAM)下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.49
  • 吸水率 [%]: 0.8
  • 缺口冲击强度: 0.534
  • 弯曲模量 [MPa]: 6.89
  • 热变形温度 [℃]: 260.0
 
Physical PropertiesMetricEnglishComments
Density 1.49 g/cc0.0538 lb/in³ASTM D792
Water Absorption 0.80 %0.80 %24 hrs; ASTM D570
Linear Mold Shrinkage 0.0040 - 0.0070 cm/cm0.0040 - 0.0070 in/in0.125 in; ASTM D955
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 9898ASTM D785
Tensile Strength at Break 131 MPa19000 psiASTM D638
Elongation at Break 2.0 %2.0 %ASTM D638
Flexural Strength 179 MPa26000 psiASTM D790
Flexural Modulus 6.89 GPa1000 ksiASTM D790
Izod Impact, Notched 0.534 J/cm1.00 ft-lb/in73°F; ASTM D256
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+14 ohm-cm1.00e+14 ohm-cmASTM D257
Dielectric Strength 19.3 kV/mm490 kV/inASTM D149
 
Thermal PropertiesMetricEnglishComments
CTE, linear 30.6 µm/m-°C
@Temperature 20.0 °C
17.0 µin/in-°F
@Temperature 68.0 °F
ASTM D696
Deflection Temperature at 0.46 MPa (66 psi) 260 °C500 °FUnannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 235 °C455 °FUnannealed; ASTM D648
Flammability, UL94 HBHB0.0590 in, BK
 HBHB0.0590 in, NC
 HBHB0.118 in, BK
 HBHB0.118 in, NC
 
Processing PropertiesMetricEnglishComments
Melt Temperature 282 - 299 °C540 - 570 °F
Mold Temperature 65.6 - 98.9 °C150 - 210 °F
Drying Temperature 73.9 °C165 °F
Dry Time 2 - 4 hour2 - 4 hour
Moisture Content 0.20 %0.20 %
Back Pressure 0.138 - 0.414 MPa20.0 - 60.0 psi
Screw Speed 40 - 120 rpm40 - 120 rpm
 
Descriptive Properties
Holding Pressure750 to 1400 psi
Injection RateFast

**
Materials flagged as discontinued () are no longer part of the manufacturer’s standard product line according to our latest information. These materials may be available by special order, in distribution inventory, or reinstated as an active product. Data sheets from materials that are no longer available remain in MatWeb to assist users in finding replacement materials.

Users of our Advanced Search (registration required) may exclude discontinued materials from search results.

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45644.html

免责声明: 本文 Ravago Manufacturing Americas Hylon® N1040MGL Nylon 6/6 (DAM) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4