EPICHEM Epinyl PA 66 GF 30 H Polyamide 66, 30% Glass, Heat Stabilized

EPICHEM Epinyl PA 66 GF 30 H Polyamide 66, 30% Glass, Heat Stabilized 物性表: EPICHEM Epinyl PA 66 GF 30 H Polyamide 66, 30% Glass, Heat Stabilized物性表及特性介绍,EPICHEM Epinyl PA 66 GF 30 H Polyamide 66, 30% Glass, Heat Stabilized注塑参数详情,如需EPICHEM Epinyl PA 66 GF 30 H Polyamide 66, 30% Glass, Heat Stabilized下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.36
  • 吸水率 [%]: 6.0
  • 缺口冲击强度: 0.7
  • 拉伸强度 [MPa]: 170.0
  • 弯曲模量 [MPa]: 8.90
 
Physical PropertiesMetricEnglishComments
Density 1.36 g/cc0.0491 lb/in³ASTM D792, ISO 1183
Water Absorption 6.0 %
@Temperature 23.0 °C
6.0 %
@Temperature 73.4 °F
24h; ASTM D570, ISO 62
Linear Mold Shrinkage 0.0020 - 0.011 cm/cm0.0020 - 0.011 in/inASTM D955
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell L 110110ASTM D785, ISO 2039/2
Tensile Strength, Yield 170 MPa24700 psiASTM D638, ISO R527
Elongation at Break 3.0 %3.0 %ASTM D638, ISO R527
Flexural Strength 235 MPa34100 psiASTM D790, ISO 178
Flexural Modulus 8.90 GPa1290 ksiASTM D790, ISO 178
Izod Impact, Notched 0.700 J/cm
@Thickness 3.20 mm,
Temperature 23.0 °C
1.31 ft-lb/in
@Thickness 0.126 in,
Temperature 73.4 °F
ASTM D256, ISO 180/4a
 
Electrical PropertiesMetricEnglishComments
Surface Resistance 1.00e+13 ohm1.00e+13 ohmASTM D257, IEC 93
Dielectric Constant 3.5
@Frequency 1000 Hz
3.5
@Frequency 1000 Hz
ASTM D150, IEC 250
Dielectric Strength 90.0 kV/mm2290 kV/inASTM D149, IEC 243
Dissipation Factor 0.020
@Frequency 1000 Hz
0.020
@Frequency 1000 Hz
ASTM D150, IEC 250
Comparative Tracking Index 425 V425 VVDE 0303-P1, IEC 112
 
Thermal PropertiesMetricEnglishComments
Maximum Service Temperature, Air 110 °C230 °F20000 h; VDE 0304/P2-1, IEC 216
 120 °C248 °F5000 h; VDE 0304/P2-1, IEC 216
 210 °C410 °Ffew hours; VDE 0304/P2-1, IEC 216
Deflection Temperature at 1.8 MPa (264 psi) 248 °C478 °FASTM D648, ISO 75
Vicat Softening Point  250 °C
@Load 5.00 kg
482 °F
@Load 11.0 lb
120°C/min; ASTM D1525/B, ISO 306/B
 254 °C
@Load 0.999 kg
489 °F
@Load 2.20 lb
120°C/min; ASTM D1525/A, ISO 306/A
Flammability, UL94  HB
@Thickness 1.60 mm
HB
@Thickness 0.0630 in
 HB
@Thickness 3.20 mm
HB
@Thickness 0.126 in

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45678.html

免责声明: 本文 EPICHEM Epinyl PA 66 GF 30 H Polyamide 66, 30% Glass, Heat Stabilized 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4