Eurotec® Tecomid® NA40 GR50 NL PA 6.6 50% glass fiber reinforced

Eurotec® Tecomid® NA40 GR50 NL PA 6.6 50% glass fiber reinforced 物性表: Eurotec® Tecomid® NA40 GR50 NL PA 6.6 50% glass fiber reinforced物性表及特性介绍,Eurotec® Tecomid® NA40 GR50 NL PA 6.6 50% glass fiber reinforced注塑参数详情,如需Eurotec® Tecomid® NA40 GR50 NL PA 6.6 50% glass fiber reinforced下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.55
  • 吸水率 [%]: 4.0
  • 缺口冲击强度: 15.0
  • 弯曲模量 [MPa]: 12.5
  • 热变形温度 [℃]: 260.0
 
Physical PropertiesMetricEnglishComments
Density 1.55 g/cc0.0560 lb/in³ISO 1183
Filler Content 50 %50 %ISO 3451
Moisture Absorption at Equilibrium 1.3 %1.3 %Humidity Absorption, 50% RH, 23°C; ISO 62
Water Absorption at Saturation 4.0 %4.0 %23°C; ISO 62
Linear Mold Shrinkage 0.0020 cm/cm0.0020 in/in
Linear Mold Shrinkage, Transverse 0.0090 cm/cm0.0090 in/in
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 235 MPa34100 psiISO 527
Elongation at Break 2.5 %2.5 %ISO 527
Tensile Modulus 16.0 GPa2320 ksiISO 527
Flexural Strength 320 MPa46400 psi23°C, at break; ISO 178
Flexural Modulus 12.5 GPa1810 ksiISO 178
Izod Impact, Notched (ISO)  15.0 kJ/m²
@Temperature -30.0 °C
7.14 ft-lb/in²
@Temperature -22.0 °F
ISO 180/1A
 18.0 kJ/m²
@Temperature 23.0 °C
8.57 ft-lb/in²
@Temperature 73.4 °F
ISO 180/1A
Charpy Impact Unnotched  8.50 J/cm²
@Temperature -30.0 °C
40.5 ft-lb/in²
@Temperature -22.0 °F
ISO 179/eU
 10.0 J/cm²
@Temperature 23.0 °C
47.6 ft-lb/in²
@Temperature 73.4 °F
ISO 179/eU
Charpy Impact, Notched  1.60 J/cm²
@Temperature -30.0 °C
7.61 ft-lb/in²
@Temperature -22.0 °F
ISO 179/eA
 1.90 J/cm²
@Temperature 23.0 °C
9.04 ft-lb/in²
@Temperature 73.4 °F
ISO 179/eA
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+15 ohm-cm1.00e+15 ohm-cmIEC 60093
Surface Resistance 1.00e+13 ohm1.00e+13 ohmIEC 60093
Comparative Tracking Index 500 V500 VIEC 60112
 
Thermal PropertiesMetricEnglishComments
Melting Point 262 °C504 °F10 K/min; ISO 3146
Deflection Temperature at 0.46 MPa (66 psi) 260 °C500 °FISO 75-1/2
Deflection Temperature at 1.8 MPa (264 psi) 255 °C491 °FISO 75-1/2
Vicat Softening Point 255 °C491 °F50N; ISO 306
Flammability, UL94  HB
@Thickness 1.60 mm
HB
@Thickness 0.0630 in
 HB
@Thickness 3.20 mm
HB
@Thickness 0.126 in
Glow Wire Test 650 °C
@Thickness 2.00 mm
1200 °F
@Thickness 0.0787 in
plaque; IEC 60695

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45759.html

免责声明: 本文 Eurotec® Tecomid® NA40 GR50 NL PA 6.6 50% glass fiber reinforced 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4