- 密度 [g/cm3]: 1.11
- 吸水率 [%]: 6.3
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.11 g/cc | 0.0401 lb/in³ | ISO 1183-1 |
| Moisture Absorption at Equilibrium | 2.0 % | 2.0 % | 50% RH |
| Water Absorption at Saturation | 6.3 % | 6.3 % | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 59 | 59 | ISO 2039-2 |
| Hardness, Shore D | 73 | 73 | |
| Ball Indentation Hardness | 120 MPa | 17400 psi | ISO 2039-1 |
| Tensile Strength | 60.0 MPa | 8700 psi | at Yield; ISO 527-1/-2 |
| Elongation at Break | 15 % | 15 % | ISO 527-1/-2 |
| Elongation at Yield | 6.0 % | 6.0 % | ISO 527-1/-2 |
| Tensile Modulus | 2.75 GPa | 399 ksi | ISO 527-1/-2 |
| Compressive Strength | 26.0 MPa @Strain 1 % | 3770 psi @Strain 1 % | ISO 604 |
| 48.0 MPa @Strain 2 % | 6960 psi @Strain 2 % | ISO 604 | |
| 69.0 MPa @Strain 5 % | 10000 psi @Strain 5 % | ISO 604 | |
| K Factor (ISO) | 2.5 µm/km | 2.5 µm/km | |
| Charpy Impact Unnotched | 2.50 J/cm² | 11.9 ft-lb/in² | ISO 179-1/1eU |
| Charpy Impact, Notched | 0.400 J/cm² | 1.90 ft-lb/in² | ISO 179-1/1eA |
| Coefficient of Friction, Dynamic | 0.12 - 0.18 | 0.12 - 0.18 | |
| Limiting Pressure Velocity | 0.300 MPa-m/sec | 8570 psi-ft/min | at 1 m/s unlubricated |
| 0.480 MPa-m/sec | 13700 psi-ft/min | at 0.1 m/s unlubricated | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | >= 1.0e+14 ohm-cm | >= 1.0e+14 ohm-cm | IEC 60093 |
| Surface Resistivity per Square | >= 1.0e+13 ohm | >= 1.0e+13 ohm | IEC 60093 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 100 µm/m-°C @Temperature 23.0 - 100 °C | 55.6 µin/in-°F @Temperature 73.4 - 212 °F | |
| Thermal Conductivity | 0.300 W/m-K | 2.08 BTU-in/hr-ft²-°F | |
| Melting Point | 215 °C | 419 °F | DSC, 10°C/min.; ISO 11357-1/-3 |
| Maximum Service Temperature, Air | 90.0 °C | 194 °F | Continuous; 20,000 h |
| 105 °C | 221 °F | Continuous; 5,000 h | |
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C | 158 °F | ISO 75-1/-2 |
| Flammability, UL94 | HB | HB | |
| Oxygen Index | <= 20 % | <= 20 % | ISO 4589-1/-2 |
| Compliance Properties | Metric | English | Comments |
| 3A-Dairy | No | No | |
| European Food 1935/2004 | No | No | |
| FDA | No | No | |
| USP Class VI | No | No | |
| Chemical Resistance Properties | Metric | English | Comments |
| Acids, Strong (pH 1-3) | Unacceptable | Unacceptable | |
| Acids, Weak | Limited | Limited | |
| Alcohols | Limited | Limited | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Limited | Limited | |
| Chlorinated Solvents | Limited | Limited | |
| Continuous Sunlight | Limited | Limited | |
| Hot Water / Steam | Limited | Limited | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable | |