- 密度 [g/cm3]: 1.13
- 缺口冲击强度: 45.0
- 拉伸强度 [MPa]: 20.0
- 弯曲模量 [MPa]: 0.300
- 硬度: 116.0
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.13 g/cc | 0.0408 lb/in³ | ASTM D792 | ||
Moisture Absorption at Equilibrium | 1.3 % | 1.3 % | 24 Hours; ASTM D570 | ||
2.7 % | 2.7 % | 50% RH; ASTM D570 | |||
9.5 % | 9.5 % | Saturation; ASTM D570 | |||
Linear Mold Shrinkage | 0.0508 cm/cm | 0.0508 in/in | 1/8" bar | ||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Rockwell R | 116 | 116 | ASTM D785 | ||
Tensile Strength, Yield | 20.0 MPa @Temperature 65.0 °C | 2900 psi @Temperature 149 °F | ASTM D638 | ||
72.0 MPa @Temperature 23.0 °C | 10400 psi @Temperature 73.4 °F | ASTM D638 | |||
114 MPa @Temperature -40.0 °C | 16500 psi @Temperature -40.0 °F | ASTM D638 | |||
Elongation at Break | >= 100 % | >= 100 % | ASTM D638 | ||
Flexural Strength | 15.0 MPa @Temperature 121 °C | 2180 psi @Temperature 250 °F | ASTM D790 | ||
20.0 MPa @Temperature 90.0 °C | 2900 psi @Temperature 194 °F | ASTM D790 | |||
30.0 MPa @Temperature 65.0 °C | 4350 psi @Temperature 149 °F | ASTM D790 | |||
100 MPa @Temperature 23.0 °C | 14500 psi @Temperature 73.4 °F | ASTM D790 | |||
154 MPa @Temperature -40.0 °C | 22300 psi @Temperature -40.0 °F | ASTM D790 | |||
Flexural Modulus | 0.300 GPa @Temperature 121 °C | 43.5 ksi @Temperature 250 °F | ASTM D790 | ||
0.360 GPa @Temperature 90.0 °C | 52.2 ksi @Temperature 194 °F | ASTM D790 | |||
0.530 GPa @Temperature 65.0 °C | 76.9 ksi @Temperature 149 °F | ASTM D790 | |||
2.69 GPa @Temperature 23.0 °C | 390 ksi @Temperature 73.4 °F | ASTM D790 | |||
2.76 GPa @Temperature -40.0 °C | 400 ksi @Temperature -40.0 °F | ASTM D790 | |||
Izod Impact, Notched (ISO) | 45.0 kJ/m² @Temperature -40.0 °C | 21.4 ft-lb/in² @Temperature -40.0 °F | ASTM D256 | ||
55.0 kJ/m² @Temperature 23.0 °C | 26.2 ft-lb/in² @Temperature 73.4 °F | ASTM D256 | |||
Dart Drop, Total Energy | 67.8 J | 50.0 ft-lb | BASF | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear | 0.740 µm/m-°C | 0.411 µin/in-°F | ASTM E831 | ||
Melting Point | 220 °C | 428 °F | ASTM D3418 | ||
Deflection Temperature at 1.8 MPa (264 psi) | 60.0 °C | 140 °F | ASTM D648 | ||
Processing Properties | Metric | English | Comments | ||
Dry Time | 2 - 4 hour | 2 - 4 hour | |||
Moisture Content | <= 0.20 % | <= 0.20 % | |||
Descriptive Properties | |||||
Commercial Status | North America |