DSM Akulon® K-FKGS6 (Dry) 30% Glass Reinforced Nylon 6 (North America)

DSM Akulon® K-FKGS6 (Dry) 30% Glass Reinforced Nylon 6 (North America) 物性表: DSM Akulon® K-FKGS6 (Dry) 30% Glass Reinforced Nylon 6 (North America)物性表及特性介绍,DSM Akulon® K-FKGS6 (Dry) 30% Glass Reinforced Nylon 6 (North America)注塑参数详情,如需DSM Akulon® K-FKGS6 (Dry) 30% Glass Reinforced Nylon 6 (North America)下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.59
  • 吸水率 [%]: 4.5
  • 热变形温度 [℃]: 215.0
 
Physical PropertiesMetricEnglishComments
Density 1.59 g/cc0.0574 lb/in³ISO 1183
Water Absorption 4.5 %4.5 %Sim. to ISO 62
Moisture Absorption at Equilibrium 1.3 %1.3 %Humidity Absorption; Sim. to ISO 62
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 150 MPa21800 psiISO 527-1/-2
Elongation at Break 2.5 %2.5 %ISO 527-1/-2
Tensile Modulus 11.5 GPa1670 ksiISO 527-1/-2
Charpy Impact Unnotched  6.00 J/cm²
@Temperature -30.0 °C
28.6 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eU
 6.00 J/cm²
@Temperature 23.0 °C
28.6 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eU
Charpy Impact, Notched  1.20 J/cm²
@Temperature -30.0 °C
5.71 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eA
 1.30 J/cm²
@Temperature 23.0 °C
6.19 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eA
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+15 ohm-cm1.00e+15 ohm-cmIEC 60093
Dielectric Constant  3.4
@Frequency 1e+6 Hz
3.4
@Frequency 1e+6 Hz
IEC 60250
 3.5
@Frequency 100 Hz
3.5
@Frequency 100 Hz
IEC 60250
Dissipation Factor  0.0060
@Frequency 100 Hz
0.0060
@Frequency 100 Hz
IEC 60250
 0.012
@Frequency 1e+6 Hz
0.012
@Frequency 1e+6 Hz
IEC 60250
Comparative Tracking Index 425 V425 VIEC 60112
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 20.0 µm/m-°C
@Temperature 20.0 °C
11.1 µin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
CTE, linear, Transverse to Flow 110 µm/m-°C
@Temperature 20.0 °C
61.1 µin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
Melting Point 220 °C428 °F10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi) 215 °C419 °FISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 205 °C401 °FISO 75-1/-2
Flammability, UL94  V-0
@Thickness 0.750 mm
V-0
@Thickness 0.0295 in
IEC 60695-11-10
 V-0
@Thickness 1.60 mm
V-0
@Thickness 0.0630 in
IEC 60695-11-10
 
Descriptive Properties
Flame retardantYes
Flame retarding agentYes
Heat stabilized or stable to heatYes
Injection MoldingYes
With fillersYes

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-46609.html

免责声明: 本文 DSM Akulon® K-FKGS6 (Dry) 30% Glass Reinforced Nylon 6 (North America) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4