DSM Akulon® K223-KMV6 (GREY) Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Cond)

DSM Akulon® K223-KMV6 (GREY) Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Cond) 物性表: DSM Akulon® K223-KMV6 (GREY) Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Cond)物性表及特性介绍,DSM Akulon® K223-KMV6 (GREY) Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Cond)注塑参数详情,如需DSM Akulon® K223-KMV6 (GREY) Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Cond)下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.53
  • 吸水率 [%]: 6.2
 
Physical PropertiesMetricEnglishComments
Density 1.53 g/cc0.0553 lb/in³(DAM); ISO 1183
Water Absorption 6.2 %6.2 %DAM; Sim. to ISO 62
Moisture Absorption at Equilibrium 1.7 %1.7 %Humidity Absorption (DAM); Sim. to ISO 62
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 40.0 MPa5800 psiISO 527-1/-2
Elongation at Break 4.0 %4.0 %ISO 527-1/-2
Tensile Modulus 3.50 GPa508 ksiISO 527-1/-2
Charpy Impact Unnotched  3.50 J/cm²
@Temperature -30.0 °C
16.7 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eU
 6.00 J/cm²
@Temperature 23.0 °C
28.6 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eU
Charpy Impact, Notched  0.500 J/cm²
@Temperature -30.0 °C
2.38 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eA
 0.500 J/cm²
@Temperature 23.0 °C
2.38 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eA
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+13 ohm-cm1.00e+13 ohm-cmIEC 60093
Surface Resistance 1.00e+14 ohm1.00e+14 ohmIEC 60093
Dielectric Constant  3.7
@Frequency 1e+6 Hz
3.7
@Frequency 1e+6 Hz
IEC 60250
 10
@Frequency 100 Hz
10
@Frequency 100 Hz
IEC 60250
Dielectric Strength 25.0 kV/mm635 kV/inIEC 60243-1
Dissipation Factor  0.090
@Frequency 1e+6 Hz
0.090
@Frequency 1e+6 Hz
IEC 60250
 0.30
@Frequency 100 Hz
0.30
@Frequency 100 Hz
IEC 60250
Comparative Tracking Index 250 - 399 V250 - 399 VPLC 2; UL 746A
 375 V375 VIEC 60112
 
Thermal PropertiesMetricEnglishComments
Melting Point 220 °C428 °F10°C/min (DAM); ISO 11357-1/-3
UL RTI, Electrical  140 °C
@Thickness 1.50 mm
284 °F
@Thickness 0.0591 in
UL746B
 140 °C
@Thickness 3.00 mm
284 °F
@Thickness 0.118 in
UL746B
UL RTI, Mechanical with Impact  110 °C
@Thickness 1.50 mm
230 °F
@Thickness 0.0591 in
UL746B
 110 °C
@Thickness 3.00 mm
230 °F
@Thickness 0.118 in
UL746B
UL RTI, Mechanical without Impact  140 °C
@Thickness 1.50 mm
284 °F
@Thickness 0.0591 in
UL746B
 140 °C
@Thickness 3.00 mm
284 °F
@Thickness 0.118 in
UL746B
 
Descriptive Properties
Flame RetardantYes
Flame Retarding AgentYes
Heat Stabilized or Stable to HeatYes
Injection MoldingYes
Release AgentYes
With FillersYes

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-46651.html

免责声明: 本文 DSM Akulon® K223-KMV6 (GREY) Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Cond) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4