- 密度 [g/cm3]: 1.0
- 吸水率 [%]: 3.0
- 拉伸强度 [MPa]: 60.0
- 热变形温度 [℃]: 135.0
- 透光率 [%]: 90.0
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.00 g/cc | 0.0361 lb/in³ | ISO 1183 | ||
Water Absorption | 3.0 % | 3.0 % | ISO 62 | ||
Moisture Absorption | 1.50 % | 1.50 % | ISO 62 | ||
Linear Mold Shrinkage, Flow | 0.0070 cm/cm | 0.0070 in/in | ISO 294-4, 2577 | ||
Linear Mold Shrinkage, Transverse | 0.0080 cm/cm | 0.0080 in/in | ISO 294-4, 2577 | ||
Mechanical Properties | Metric | English | Comments | ||
Ball Indentation Hardness | 90.0 MPa | 13100 psi | conditioned; ISO 2039-1 | ||
Tensile Strength, Yield | 60.0 MPa | 8700 psi | conditioned; ISO 527-1/-2 | ||
60.0 MPa | 8700 psi | dry; ISO 527-1/-2 | |||
Elongation at Break | >= 50 % | >= 50 % | conditioned; ISO 527-1/-2 | ||
<= 50 % | <= 50 % | dry; ISO 527-1/-2 | |||
Elongation at Yield | 6.0 % | 6.0 % | conditioned; ISO 527-1/-2 | ||
6.0 % | 6.0 % | dry; ISO 527-1/-2 | |||
Tensile Modulus | 1.60 GPa | 232 ksi | conditioned; ISO 527-1/-2 | ||
1.60 GPa | 232 ksi | dry; ISO 527-1/-2 | |||
Charpy Impact Unnotched | NB | NB | dry; ISO 179/1eU | ||
NB | NB | conditioned; ISO 179/1eU | |||
NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | dry; ISO 179/1eU | |||
NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
Charpy Impact, Notched | 0.900 J/cm² | 4.28 ft-lb/in² | dry; ISO 179/1eA | ||
1.30 J/cm² | 6.19 ft-lb/in² | conditioned; ISO 179/1eA | |||
0.900 J/cm² @Temperature 30.0 °C | 4.28 ft-lb/in² @Temperature 86.0 °F | dry; ISO 179/1eU | |||
1.20 J/cm² @Temperature 30.0 °C | 5.71 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | conditioned; IEC 60093 | ||
Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
Dielectric Strength | 34.0 kV/mm | 864 kV/in | conditioned; IEC 60243-1 | ||
Comparative Tracking Index | 600 V | 600 V | conditioned; IEC 60112 | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear, Parallel to Flow | 90.0 µm/m-°C | 50.0 µin/in-°F | ISO 11359-1/-2 | ||
CTE, linear, Transverse to Flow | 90.0 µm/m-°C | 50.0 µin/in-°F | ISO 11359-1/-2 | ||
Maximum Service Temperature, Air | 80.0 - 100 °C | 176 - 212 °F | long term; EMS | ||
120 °C | 248 °F | short term; EMS | |||
Transformation Temperature, Tg | 155 °C | 311 °F | 10°C/min; ISO 11357-1/-2 | ||
Deflection Temperature at 0.46 MPa (66 psi) | 135 °C | 275 °F | ISO 75-1/-2 | ||
Deflection Temperature at 1.8 MPa (264 psi) | 115 °C | 239 °F | ISO 75-1/-2 | ||
Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
Optical Properties | Metric | English | Comments | ||
Transmission, Visible | 90.0 % | 90.0 % | transparent; thickness not quantified | ||
Descriptive Properties | |||||
Automotive | Automotive electr. and electronics, lighting | ||||
Cooling and climate control | |||||
Fuel systems | |||||
Interior | |||||
Powertrain and Chassis | |||||
Electricals & Electronics | Connectors | ||||
Electrical appliances | |||||
Electrical equipment | |||||
Lighting | |||||
Mobile phones and other portable devices | |||||
Food contact | EU Requirements | ||||
FDA | |||||
Form | Granules | ||||
Industry & Consumer goods | Heating systems | ||||
Housewares | |||||
Hydraulics & Pneumatics | |||||
Mechanical Engineering | |||||
Medical devices | |||||
Power transmission | |||||
Sanitary, water and gas supply | |||||
Sports & Leisure | |||||
Tools & Accessories | |||||
Medical | FDA | ||||
USP VI | |||||
Optics | Lenses | ||||
Optical components | |||||
Safety glasses | |||||
Spectacle frames | |||||
Sunglasses | |||||
Packaging | Cosmetics / Personal care | ||||
Medical packaging | |||||
Non oriented film | |||||
Processing | Injection Molding | ||||
Other Extrusion | |||||
Special Characteristics | Transparent | ||||
Water Contact | DVGW W270 | ||||
KTW | |||||
NSF 61 | |||||
WRAS |