UBE UBESTA® 3030LUX 8x1 mm Black Automotive Grade Nylon 12 Tube

UBE UBESTA® 3030LUX 8x1 mm Black Automotive Grade Nylon 12 Tube 物性表: UBE UBESTA® 3030LUX 8x1 mm Black Automotive Grade Nylon 12 Tube物性表及特性介绍,UBE UBESTA® 3030LUX 8x1 mm Black Automotive Grade Nylon 12 Tube注塑参数详情,如需UBE UBESTA® 3030LUX 8x1 mm Black Automotive Grade Nylon 12 Tube下载, 可到相关下载区下载
 
Mechanical PropertiesMetricEnglishComments
Elongation at Break 260 %260 %
Impact NBNBin 10 samples at -40°C (dry)
 NBNBin 10 samples at -40°C (conditioned)
 
Processing PropertiesMetricEnglishComments
Processing Temperature 230 °C446 °FFlange Temperature for T-Die Cast Film Extrusion
Feed Temperature 40.0 °C104 °FInjection Molding
Zone 1 190 °C374 °FFor T-Die Cast Film Extrusion
 220 °C428 °FInjection Molding
 230 °C446 °FFor 8x1 mm Tube Extrusion
Zone 2 210 °C410 °FFor T-Die Cast Film Extrusion
 225 °C437 °FFor 8x1 mm Tube Extrusion
 230 °C446 °FInjection Molding
Zone 3 220 °C428 °FFor 8x1 mm Tube Extrusion
 230 °C446 °FFor T-Die Cast Film Extrusion
 240 °C464 °FInjection Molding
Zone 4 215 °C419 °FFor 8x1 mm Tube Extrusion
 240 °C464 °FInjection Molding
Zone 5 230 °C446 °FInjection Molding
Die Temperature 230 °C446 °FFor T-Die Cast Film Extrusion
Mold Temperature 40.0 - 60.0 °C104 - 140 °FInjection Molding
Injection Velocity 100 mm/sec3.94 in/secInjection Molding
Die Opening 0.0400 cm0.0157 inFor T-Die Cast Film Extrusion
Roll Temperature 50.0 °C122 °FChill Roll Temperature for T-Die Cast Film Extrusion
Drying Temperature 80.0 °C176 °FOption 1
 100 °C212 °FOption 2
 110 °C230 °FOption 3
Dry Time 2 - 4 hour2 - 4 hourOption 3
 4 - 6 hour4 - 6 hourOption 2
 6 - 8 hour6 - 8 hourOption 1
Injection Pressure 40.0 - 50.0 MPa5800 - 7250 psiInjection Molding (Injection pressure should be increased when molding thin wall parts. Pressure up to 75 bar can be used here.)
Hold Pressure 25.0 - 50.0 MPa3630 - 7250 psiInjection Molding
Back Pressure 5.00 MPa725 psiInjection Molding
Screw Speed 15 - 76 rpm15 - 76 rpmFor 8x1 mm Tube Extrusion
 
Descriptive Properties
Burst Pressure13 MPa
C/R3-3.5:1For 8x1 mm Tube Extrusion
Calibrating Vacuum100 mbarFor 8x1 mm Tube Extrusion
Calibration 9.95 mmFor 8x1 mm Tube Extrusion
Compression Ratio2.5-3.5:1Injection Molding
 min 3:1For 8x1 mm Tube Extrusion
Die Diameter16 mmFor 8x1 mm Tube Extrusion
Die Width300 mmFor T-Die Cast Film Extrusion
Extruder Barmag, Screw Diameter = 30 mmFor T-Die Cast Film Extrusion
Extruder Characteristics65 mm screw diameterFor 8x1 mm Tube Extrusion
Film Thickness60 micronsFor T-Die Cast Film Extrusion
Flight Depth in the Feeding Zone10-15% of Screw DiameterInjection Molding
Flight Depth in the Metering Zone5-7% of Screw DiameterInjection Molding
Haul Off Speed5 m/minFor T-Die Cast Film Extrusion
Haul Speed10-55 m/minFor 8x1 mm Tube Extrusion
Hoop Stress47 MPa
L/D Ratio25:1For 8x1 mm Tube Extrusion
 min 20:1Injection Molding
Length of Compression Zone25-45% of total screw lengthInjection Molding
 30% of screw lengthFor 8x1 mm Tube Extrusion
Length of Feeding Zone20-40% of total screw lengthInjection Molding
 30-40% of screw lengthFor 8x1 mm Tube Extrusion
Length of Metering Zone30-45% of screw lengthFor 8x1 mm Tube Extrusion
 35-45% of total screw lengthInjection Molding
Mandrel Diameter12 mmFor 8x1 mm Tube Extrusion
Minimum Bending Radius20 mm
Peripheral Screw Speed10 m/minInjection Molding
Tensile Strength1170 N
Water Temperature10-18°CFor 8x1 mm Tube Extrusion

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47217.html

免责声明: 本文 UBE UBESTA® 3030LUX 8x1 mm Black Automotive Grade Nylon 12 Tube 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4