Overview of materials for Nylon 63, 35% Glass-Filled

Overview of materials for Nylon 63, 35% Glass-Filled 物性表: Overview of materials for Nylon 63, 35% Glass-Filled物性表及特性介绍,Overview of materials for Nylon 63, 35% Glass-Filled注塑参数详情,如需Overview of materials for Nylon 63, 35% Glass-Filled下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.38
  • 吸水率 [%]: 5.5
  • 弯曲强度 [MPa]: 120.0
  • 热变形温度 [℃]: 260.0
 
Physical PropertiesMetricEnglishComments
Density 1.38 - 1.41 g/cc0.0499 - 0.0509 lb/in³Average value: 1.39 g/cc Grade Count:6
Water Absorption 5.50 - 8.00 %5.50 - 8.00 %Average value: 7.17 % Grade Count:6
Moisture Absorption at Equilibrium 1.50 - 2.10 %1.50 - 2.10 %Average value: 1.90 % Grade Count:6
Linear Mold Shrinkage 0.00400 cm/cm0.00400 in/inAverage value: 0.00400 cm/cm Grade Count:4
Linear Mold Shrinkage, Transverse 0.00900 cm/cm0.00900 in/inAverage value: 0.00900 cm/cm Grade Count:4
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 120 - 210 MPa17400 - 30500 psiAverage value: 160 MPa Grade Count:6
Elongation at Break 3.00 - 5.00 %3.00 - 5.00 %Average value: 4.00 % Grade Count:6
Modulus of Elasticity 7.50 - 11.0 GPa1090 - 1600 ksiAverage value: 8.92 GPa Grade Count:6
Izod Impact, Unnotched (ISO) 9.50 - 9.50 kJ/m²
@Temperature -40.0 - -40.0 °C
4.52 - 4.52 ft-lb/in²
@Temperature -40.0 - -40.0 °F
Average value: 9.50 kJ/m² Grade Count:1
Charpy Impact Unnotched 8.00 - 10.5 J/cm²38.1 - 50.0 ft-lb/in²Average value: 9.33 J/cm² Grade Count:6
 7.00 - 7.50 J/cm²
@Temperature -30.0 - -30.0 °C
33.3 - 35.7 ft-lb/in²
@Temperature -22.0 - -22.0 °F
Average value: 7.17 J/cm² Grade Count:6
Charpy Impact, Notched 1.20 - 2.10 J/cm²5.71 - 9.99 ft-lb/in²Average value: 1.63 J/cm² Grade Count:6
 1.00 - 1.10 J/cm²
@Temperature -30.0 - -30.0 °C
4.76 - 5.24 ft-lb/in²
@Temperature -22.0 - -22.0 °F
Average value: 1.03 J/cm² Grade Count:6
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+12 - 1.00e+14 ohm-cm1.00e+12 - 1.00e+14 ohm-cmAverage value: 5.05e+13 ohm-cm Grade Count:6
Surface Resistance 1.00e+13 ohm1.00e+13 ohmAverage value: 1.00e+13 ohm Grade Count:3
Dielectric Constant 3.50 - 10.03.50 - 10.0Average value: 5.37 Grade Count:6
Dielectric Strength 25.0 - 35.0 kV/mm635 - 889 kV/inAverage value: 29.2 kV/mm Grade Count:6
Dissipation Factor 0.00500 - 0.3000.00500 - 0.300Average value: 0.0991 Grade Count:6
 
Thermal PropertiesMetricEnglishComments
CTE, linear 20.0 µm/m-°C11.1 µin/in-°FAverage value: 20.0 µm/m-°C Grade Count:3
CTE, linear, Transverse to Flow 60.0 - 70.0 µm/m-°C33.3 - 38.9 µin/in-°FAverage value: 66.7 µm/m-°C Grade Count:3
Melting Point 260 °C500 °FAverage value: 260 °C Grade Count:6
Deflection Temperature at 0.46 MPa (66 psi) 260 °C500 °FAverage value: 260 °C Grade Count:3
Deflection Temperature at 1.8 MPa (264 psi) 246 - 255 °C475 - 491 °FAverage value: 249 °C Grade Count:3

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47456.html

免责声明: 本文 Overview of materials for Nylon 63, 35% Glass-Filled 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4