DSM Akulon® S223-HG7 (Dry) 35% Glass Reinforced Nylon 66 (North America)

DSM Akulon® S223-HG7 (Dry) 35% Glass Reinforced Nylon 66 (North America) 物性表: DSM Akulon® S223-HG7 (Dry) 35% Glass Reinforced Nylon 66 (North America)物性表及特性介绍,DSM Akulon® S223-HG7 (Dry) 35% Glass Reinforced Nylon 66 (North America)注塑参数详情,如需DSM Akulon® S223-HG7 (Dry) 35% Glass Reinforced Nylon 66 (North America)下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.41
  • 吸水率 [%]: 5.5
  • 热变形温度 [℃]: 260.0
 
Physical PropertiesMetricEnglishComments
Density 1.41 g/cc0.0509 lb/in³ISO 1183
Water Absorption 5.5 %5.5 %Sim. to ISO 62
Moisture Absorption at Equilibrium 1.5 %1.5 %Humidity Absorption; Sim. to ISO 62
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 210 MPa30500 psiISO 527-1/-2
Elongation at Break 3.0 %3.0 %ISO 527-1/-2
Tensile Modulus 11.0 GPa1600 ksiISO 527-1/-2
Charpy Impact Unnotched  7.50 J/cm²
@Temperature -30.0 °C
35.7 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eU
 9.50 J/cm²
@Temperature 23.0 °C
45.2 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eU
Charpy Impact, Notched  1.10 J/cm²
@Temperature -30.0 °C
5.24 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eA
 1.30 J/cm²
@Temperature 23.0 °C
6.19 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eA
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+14 ohm-cm1.00e+14 ohm-cmIEC 60093
Dielectric Constant  3.6
@Frequency 1e+6 Hz
3.6
@Frequency 1e+6 Hz
IEC 60250
 4.0
@Frequency 100 Hz
4.0
@Frequency 100 Hz
IEC 60250
Dielectric Strength 35.0 kV/mm889 kV/inIEC 60243-1
Dissipation Factor  0.0050
@Frequency 100 Hz
0.0050
@Frequency 100 Hz
IEC 60250
 0.014
@Frequency 1e+6 Hz
0.014
@Frequency 1e+6 Hz
IEC 60250
Comparative Tracking Index 500 V500 VIEC 60112
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 20.0 µm/m-°C
@Temperature 20.0 °C
11.1 µin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
CTE, linear, Transverse to Flow 60.0 µm/m-°C
@Temperature 20.0 °C
33.3 µin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
Melting Point 260 °C500 °F10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi) 260 °C500 °FISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 255 °C491 °FISO 75-1/-2
Flammability, UL94  HB
@Thickness 0.710 mm
HB
@Thickness 0.0280 in
IEC 60695-11-10
 HB
@Thickness 1.60 mm
HB
@Thickness 0.0630 in
IEC 60695-11-10
 
Descriptive Properties
Heat stabilized or stable to heatYes
Injection MoldingYes
Release agentYes
With fillersYes

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47464.html

免责声明: 本文 DSM Akulon® S223-HG7 (Dry) 35% Glass Reinforced Nylon 66 (North America) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4