EMS-Grivory Grilamid XE 4108 nat PA612-GF50

EMS-Grivory Grilamid XE 4108 nat PA612-GF50 物性表: EMS-Grivory Grilamid XE 4108 nat PA612-GF50物性表及特性介绍,EMS-Grivory Grilamid XE 4108 nat PA612-GF50注塑参数详情,如需EMS-Grivory Grilamid XE 4108 nat PA612-GF50下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.52
  • 吸水率 [%]: 1.6
 
Physical PropertiesMetricEnglishComments
Density 1.52 g/cc0.0549 lb/in³ISO 1183
Water Absorption 1.6 %1.6 %ISO 62
Moisture Absorption 0.700 %0.700 %ISO 62
Linear Mold Shrinkage, Flow 0.0030 cm/cm0.0030 in/inISO 294-4, 2577
Linear Mold Shrinkage, Transverse 0.011 cm/cm0.011 in/inISO 294-4, 2577
 
Mechanical PropertiesMetricEnglishComments
Ball Indentation Hardness 175 MPa25400 psiconditioned; ISO 2039-1
 220 MPa31900 psidry; ISO 2039-1
Tensile Strength at Break 150 MPa21800 psiconditioned; ISO 527-1/-2
 185 MPa26800 psidry; ISO 527-1/-2
Elongation at Break 3.5 %3.5 %dry; ISO 527-1/-2
 5.0 %5.0 %conditioned; ISO 527-1/-2
Tensile Modulus 12.5 GPa1810 ksiconditioned; ISO 527-1/-2
 15.5 GPa2250 ksidry; ISO 527-1/-2
Charpy Impact Unnotched 7.50 J/cm²35.7 ft-lb/in²dry; ISO 179/1eU
 7.50 J/cm²35.7 ft-lb/in²conditioned; ISO 179/1eU
 7.50 J/cm²
@Temperature 30.0 °C
35.7 ft-lb/in²
@Temperature 86.0 °F
conditioned; ISO 179/1eU
 8.00 J/cm²
@Temperature 30.0 °C
38.1 ft-lb/in²
@Temperature 86.0 °F
dry; ISO 179/1eU
Charpy Impact, Notched 1.60 J/cm²7.61 ft-lb/in²dry; ISO 179/1eA
 1.70 J/cm²8.09 ft-lb/in²conditioned; ISO 179/1eA
 1.20 J/cm²
@Temperature 30.0 °C
5.71 ft-lb/in²
@Temperature 86.0 °F
dry; ISO 179/1eU
 1.20 J/cm²
@Temperature 30.0 °C
5.71 ft-lb/in²
@Temperature 86.0 °F
conditioned; ISO 179/1eU
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+12 ohm-cm1.00e+12 ohm-cmdry; IEC 60093
 1.00e+12 ohm-cm1.00e+12 ohm-cmconditioned; IEC 60093
Surface Resistance 1.00e+11 ohm1.00e+11 ohmIEC 60093
Dielectric Strength 36.0 kV/mm914 kV/indry; IEC 60243-1
 36.0 kV/mm914 kV/inconditioned; IEC 60243-1
Comparative Tracking Index 600 V600 Vconditioned; IEC 60112
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 10.0 µm/m-°C5.56 µin/in-°FISO 11359-1/-2
CTE, linear, Transverse to Flow 90.0 µm/m-°C50.0 µin/in-°FISO 11359-1/-2
Melting Point 215 °C419 °F10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air 90.0 - 120 °C194 - 248 °Flong term; EMS
 180 °C356 °Fshort term; EMS
Deflection Temperature at 1.8 MPa (264 psi) 185 °C365 °FISO 75-1/-2
Deflection Temperature at 8.0 MPa 120 °C248 °FISO 75-1/-2
Flammability, UL94 HBHBIEC 60695-11-10
 
Descriptive Properties
AutomotiveAir intake sytems
 Automotive electr. and electronics, lighting
 Compressed air systems
 Cooling and climate control
 Exterior
 Fuel systems
 Hydraulic systems
 Interior
 Powertrain and Chassis
Electricals & ElectronicsConnectors
 Electrical appliances
 Electrical equipment
 Lighting
 Mobile phones and other portable devices
FormGranules
Industry & Consumer goodsHeating systems
 Housewares
 Hydraulics & Pneumatics
 Mechanical Engineering
 Power transmission
 Sports & Leisure
 Tools & Accessories
ProcessingInjection Molding
Product AttributesHydrolysis resistant
 Improved alcohol resistance
Special CharacteristicsImproved heat resistance
 Improved UV resistance (outdoor use)
 Light stabilized or stable to light

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47521.html

免责声明: 本文 EMS-Grivory Grilamid XE 4108 nat PA612-GF50 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4