SABIC Innovative Plastics LNP LUBRICOMP IFL34 PA 6/12

SABIC Innovative Plastics LNP LUBRICOMP IFL34 PA 6/12 物性表: SABIC Innovative Plastics LNP LUBRICOMP IFL34 PA 6/12物性表及特性介绍,SABIC Innovative Plastics LNP LUBRICOMP IFL34 PA 6/12注塑参数详情,如需SABIC Innovative Plastics LNP LUBRICOMP IFL34 PA 6/12下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.35
  • 缺口冲击强度: 0.96
  • 拉伸强度 [MPa]: 115.0
  • 弯曲模量 [MPa]: 5.51
  • 热变形温度 [℃]: 212.0
 
Physical PropertiesMetricEnglishComments
Density 1.35 g/cc0.0488 lb/in³ASTM D792
 1.35 g/cc0.0488 lb/in³ISO 1183
Moisture Absorption 0.100 %0.100 %50% RH, 24 hrs; ASTM D570
Linear Mold Shrinkage, Flow  0.0030 - 0.0050 cm/cm
@Time 86400 sec
0.0030 - 0.0050 in/in
@Time 24.0 hour
ASTM D955
 0.0041 cm/cm
@Time 86400 sec
0.0041 in/in
@Time 24.0 hour
ISO 294
Linear Mold Shrinkage, Transverse  0.010 - 0.012 cm/cm
@Time 86400 sec
0.010 - 0.012 in/in
@Time 24.0 hour
ASTM D955
 0.011 cm/cm
@Time 86400 sec
0.011 in/in
@Time 24.0 hour
ISO 294
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 115 MPa16700 psiASTM D638
 121 MPa17500 psiISO 527
Tensile Strength, Yield 115 MPa16700 psiASTM D638
 121 MPa17500 psiISO 527
Elongation at Break 3.0 %3.0 %ISO 527
 3.1 %3.1 %ASTM D638
Elongation at Yield 3.0 %3.0 %ISO 527
 3.1 %3.1 %ASTM D638
Tensile Modulus 6.89 GPa999 ksi50 mm/min; ASTM D638
 7.10 GPa1030 ksi1 mm/min; ISO 527
Flexural Strength 172 MPa24900 psiASTM D790
 176 MPa25500 psiISO 178
Flexural Modulus 5.51 GPa799 ksiASTM D790
 6.10 GPa885 ksiISO 178
Izod Impact, Notched 0.960 J/cm1.80 ft-lb/inASTM D256
Izod Impact, Unnotched 9.29 J/cm17.4 ft-lb/inASTM D4812
Izod Impact, Notched (ISO) 9.00 kJ/m²4.28 ft-lb/in²80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) 53.0 kJ/m²25.2 ft-lb/in²80*10*4; ISO 180/1U
Dart Drop, Total Energy 8.00 J5.90 ft-lbInstrumented Impact Energy @ peak; ASTM D3763
Impact Test 3.00 J2.21 ft-lbMultiaxial Impact; ISO 6603
Coefficient of Friction, Dynamic 0.460.46ASTM D3702 Modified
Coefficient of Friction, Static 0.470.47ASTM D3702 Modified
K (wear) Factor 36.3 x 10-8 mm³/N-M18.0 x 10-10 in³-min/ft-lb-hrWasher; ASTM D3702 Modified
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow  99.0 µm/m-°C
@Temperature -40.0 - 40.0 °C
55.0 µin/in-°F
@Temperature -40.0 - 104 °F
ASTM E 831
 99.0 µm/m-°C
@Temperature -40.0 - 40.0 °C
55.0 µin/in-°F
@Temperature -40.0 - 104 °F
ISO 11359-2
CTE, linear, Transverse to Flow  39.0 µm/m-°C
@Temperature -40.0 - 40.0 °C
21.7 µin/in-°F
@Temperature -40.0 - 104 °F
ISO 11359-2
 39.6 µm/m-°C
@Temperature -40.0 - 40.0 °C
22.0 µin/in-°F
@Temperature -40.0 - 104 °F
ASTM E 831
Deflection Temperature at 0.46 MPa (66 psi) 212 °C414 °FFlatw 80*10*4 sp=64mm; ISO 75/Bf
 212 °C
@Thickness 3.20 mm
414 °F
@Thickness 0.126 in
unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 195 °C383 °FFlatw 80*10*4 sp=64mm; ISO 75/Af
 197 °C
@Thickness 3.20 mm
387 °F
@Thickness 0.126 in
unannealed; ASTM D648

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47764.html

免责声明: 本文 SABIC Innovative Plastics LNP LUBRICOMP IFL34 PA 6/12 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4