Techmer Lehvoss Compounds Plaslube® J-4/30/TF/15 Nylon 612, 30% GFR, 15% PTFE物性表参数

Techmer Lehvoss Compounds Plaslube® J-4/30/TF/15 Nylon 612, 30% GFR, 15% PTFE

Techmer Lehvoss Compounds Plaslube® J-4/30/TF/15 Nylon 612, 30% GFR, 15% PTFE 物性表: Techmer Lehvoss Compounds Plaslube® J-4/30/TF/15 Nylon 612, 30% GFR, 15% PTFE物性表及特性介绍,Techmer Lehvoss Compounds Plaslube® J-4/30/TF/15 Nylon 612, 30% GFR, 15% PTFE注塑参数详情,如需Techmer Lehvoss Compounds Plaslube® J-4/30/TF/15 Nylon 612, 30% GFR, 15% PTFE下载, 可到相关下载区下载

密度 [g/cm3]: 1.45
吸水率 [%]: 0.13
缺口冲击强度: 1.6
断裂伸长率 [%]: 214
弯曲强度 [MPa]: 138.0
弯曲模量 [MPa]: 8.27

Physical Properties	Metric	English	Comments

Density	1.45 g/cc	0.0524 lb/in³	ASTM D792
Water Absorption	0.13 %	0.13 %	24 hrs. ASTM D570
Linear Mold Shrinkage	0.0020 cm/cm @Thickness 3.17 mm	0.0020 in/in @Thickness 0.125 in	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	138 MPa	20000 psi	ASTM D638
Flexural Yield Strength	214 MPa	31000 psi	ASTM D790
Flexural Modulus	8.27 GPa	1200 ksi	ASTM D790
Izod Impact, Notched	1.60 J/cm @Thickness 3.17 mm	3.00 ft-lb/in @Thickness 0.125 in	ASTM D256
Coefficient of Friction, Dynamic	0.25	0.25
Coefficient of Friction, Static	0.20	0.20
K (wear) Factor	141 x 10^-8 mm³/N-M	70.0 x 10^-10 in³-min/ft-lb-hr	Thrust washer at 2000 PV
Limiting Pressure Velocity	0.701 MPa-m/sec	20000 psi-ft/min	at 100 FPM, ambient temperature, thrust washer.

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	199 °C	390 °F	ASTM D648

关键词:
供应
PA612
Techmer Lehvoss Compounds Plaslube® J-4/30/TF/15 Nylon 612
30% GFR
15% PTFE

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47813.html

免责声明: 本文 Techmer Lehvoss Compounds Plaslube® J-4/30/TF/15 Nylon 612, 30% GFR, 15% PTFE 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息