颗粒图：
物性表：
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.36 g/cc | 1.36 g/cc | ASTM D792 | ||
| Density | 1.36 g/cc | 0.0491 lb/in³ | ISO 1183 | ||
| Linear Mold Shrinkage, Flow | 0.0010 - 0.0020 cm/cm | 0.0010 - 0.0020 in/in | ASTM D955 | ||
| Linear Mold Shrinkage, Transverse | 0.0030 - 0.0040 cm/cm | 0.0030 - 0.0040 in/in | ASTM D955 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 170 MPa | 24700 psi | 5mm/min; ISO 527-2/1A | ||
| 194 MPa | 28100 psi | ASTM D638 | |||
| 110 MPa @Temperature 121 °C |
16000 psi @Temperature 250 °F |
ASTM D638 | |||
| 228 MPa @Temperature -40.0 °C |
33100 psi @Temperature -40.0 °F |
ASTM D638 | |||
| Elongation at Break | 2.1 % | 2.1 % | 5mm/min; ISO 527-2/1A | ||
| 2.4 % @Temperature 22.8 °C |
2.4 % @Temperature 73.0 °F |
ASTM D638 | |||
| 2.5 % @Temperature -40.0 °C |
2.5 % @Temperature -40.0 °F |
ASTM D638 | |||
| 2.7 % @Temperature 121 °C |
2.7 % @Temperature 250 °F |
ASTM D638 | |||
| Tensile Modulus | 9.70 GPa | 1410 ksi | 1mm/min; ISO 527-2/1A | ||
| 5.31 GPa @Temperature 121 °C |
770 ksi @Temperature 250 °F |
ASTM D638 | |||
| 9.31 GPa @Temperature -40.0 °C |
1350 ksi @Temperature -40.0 °F |
ASTM D638 | |||
| 10.3 GPa @Temperature 22.8 °C |
1490 ksi @Temperature 73.0 °F |
ASTM D638 | |||
| Flexural Strength | 280 MPa | 40600 psi | ISO 178 | ||
| 290 MPa | 42100 psi | ASTM D790 | |||
| 159 MPa @Temperature 121 °C |
23000 psi @Temperature 250 °F |
ASTM D790 | |||
| 298 MPa @Temperature -40.0 °C |
43200 psi @Temperature -40.0 °F |
ASTM D790 | |||
| Flexural Modulus | 9.00 GPa | 1310 ksi | ISO 178 | ||
| 4.41 GPa @Temperature 121 °C |
640 ksi @Temperature 250 °F |
ASTM D790 | |||
| 9.10 GPa @Temperature 22.8 °C |
1320 ksi @Temperature 73.0 °F |
ASTM D790 | |||
| 9.38 GPa @Temperature -40.0 °C |
1360 ksi @Temperature -40.0 °F |
ASTM D790 | |||
| Izod Impact, Notched | 2.67 J/cm | 5.00 ft-lb/in | ASTM D256 | ||
| 2.99 J/cm @Temperature -40.0 °C |
5.60 ft-lb/in @Temperature -40.0 °F |
ASTM D256 | |||
| 3.84 J/cm @Temperature 149 °C |
7.20 ft-lb/in @Temperature 300 °F |
ASTM D256 | |||
| Charpy Impact, Notched | 2.30 J/cm² | 10.9 ft-lb/in² | ISO 179/1eA | ||
| Thermal Properties | Metric | English | Comments | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 252 °C | 485 °F | ASTM D648 | ||
| 252 °C | 486 °F | ISO 75-1, -2 | |||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 70.0 - 80.0 °C | 158 - 176 °F | |||
| 80.0 - 100 °C | 176 - 212 °F | Cavity temperature | |||
| Feed Temperature | 20.0 - 50.0 °C | 68.0 - 122 °F | |||
| Zone 1 | 285 - 295 °C | 545 - 563 °F | |||
| Zone 2 | 290 - 300 °C | 554 - 572 °F | |||
| Zone 3 | 300 - 310 °C | 572 - 590 °F | |||
| Zone 4 | 300 - 315 °C | 572 - 599 °F | |||
| Die Temperature | 300 - 315 °C | 572 - 599 °F | |||
| Melt Temperature | 290 - 315 °C | 554 - 599 °F | |||
| Mold Temperature | 85.0 - 95.0 °C | 185 - 203 °F | |||
| Drying Temperature | 70.0 - 80.0 °C | 158 - 176 °F | |||
| Dry Time | 2.00 - 4.00 hour | 2.00 - 4.00 hour | |||
| Moisture Content | 0.18 % | 0.18 % | Necessary low maximum residual | ||
| Dew Point | <= -30.0 °C | <= -22.0 °F | Pre-drying | ||
| De |
|||||
| Injection molding | Yes | ||||
| Longer pre-drying times/storage | Material can be over dried and may discolor. | ||||
用途：广泛应用于机械、仪器仪表、汽车部件、电子电气、铁路、家电、通讯、纺机、体育休闲用品、油管、油箱及一些精密工程制品。
电子电器：连接器、卷线轴、计时器、护盖断路器、开关壳座。
汽车： 散热风扇、门把、油箱盖、进气隔栅、水箱护盖、灯座。
工业零件：椅座、自行车输框、溜冰鞋底座、纺织梭、踏板、滑输。
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636
QQ ：205730283
邮 箱 ：205730283@qq.com