PA66 G10 FR PH1 50%玻璃纤维增强、_产品资讯

PA66 G10 FR PH1 聚酰胺俗称尼龙（Nylon），英文名称Polyamide（简称PA），是分子主链上含有重复酰胺基团—[NHCO]—的热塑性树脂总称。包括脂肪族PA，脂肪—芳香族PA和芳香族PA。其中，脂肪族PA品种多，产量大，应用广泛，其命名由合成单体具体的碳原子数而定。

颗粒图：

用途：

广泛应用于机械、仪器仪表、汽车部件、电子电气、铁路、家电、通讯、纺机、体育休闲用品、油管、油箱及一些精密工程制品。

电子电器：连接器、卷线轴、计时器、护盖断路器、开关壳座。

汽车：散热风扇、门把、油箱盖、进气隔栅、水箱护盖、灯座。

工业零件：椅座、自行车输框、溜冰鞋底座、纺织梭、踏板、滑输。

上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。

PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。

欢迎各位客户前来咨询：

联系人：夏先生

手机：13501802636

QQ ：205730283

邮箱：205730283@qq.com

物性表:

Physical Properties	Metric	English	Comments

Density	1.58 g/cc	0.0571 lb/in³	ASTM D792, ISO 1183
Water Absorption	0.50 %	0.50 %	23°C, 24h in H₂O; sim. ISO 62
Water Absorption at Saturation	2.5 %	2.5 %	sim. ISO 62
Linear Mold Shrinkage, Flow	0.0030 cm/cm	0.0030 in/in	parallel; Euronil
Linear Mold Shrinkage, Transverse	0.0050 cm/cm	0.0050 in/in	Euronil

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	210 MPa	30500 psi	ISO 527, ASTM D638
Elongation at Break	1.5 %	1.5 %
Tensile Modulus	15.0 GPa	2180 ksi	ISO 527, ASTM D638
Flexural Yield Strength	340 MPa	49300 psi	ISO 178, ASTM D790
	185 MPa @Temperature 90.0 °C	26800 psi @Temperature 194 °F	ISO 178, ASTM D790
Flexural Modulus	14.0 GPa	2030 ksi	ISO 178, ASTM D790
	7.00 GPa @Temperature 90.0 °C	1020 ksi @Temperature 194 °F	ISO 178, ASTM D790
Izod Impact, Notched (ISO)	11.0 kJ/m² @Temperature -30.0 °C	5.23 ft-lb/in² @Temperature -22.0 °F	ISO 180/1A
	13.5 kJ/m² @Temperature 23.0 °C	6.42 ft-lb/in² @Temperature 73.4 °F	ISO 180/1A
Charpy Impact Unnotched	5.50 J/cm²	26.2 ft-lb/in²	ISO 179
	4.60 J/cm² @Temperature -30.0 °C	21.9 ft-lb/in² @Temperature -22.0 °F	ISO 179
Charpy Impact, Notched	0.500 J/cm²	2.38 ft-lb/in²	ISO 179
	0.350 J/cm² @Temperature -30.0 °C	1.67 ft-lb/in² @Temperature -22.0 °F	ISO 179

Electrical Properties	Metric	English	Comments
Dielectric Strength	21.0 kV/mm @Thickness 2.00 mm	533 kV/in @Thickness 0.0787 in	ASTM D149
Comparative Tracking Index	550 V @Thickness 3.20 mm	550 V @Thickness 0.126 in	Sol. A; IEC 112, UL 746A
	550 V @Thickness 3.20 mm	550 V @Thickness 0.126 in	Sol. B; IEC 112, UL 746A

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	125 °C	257 °F	20,000 hr; IEC 216
Deflection Temperature at 0.46 MPa (66 psi)	261 °C	502 °F	ISO 75, ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	255 °C	491 °F	ISO 75, ASTM D648
Vicat Softening Point	254 °C	489 °F	49 N; ISO 306, ASTM D1525
	260 °C	500 °F	9.8 N; ISO 306, ASTM D1525
Flammability, UL94	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in
	V-0 @Thickness 3.20 mm	V-0 @Thickness 0.126 in
	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in
Oxygen Index	32 %	32 %	ASTM D2863
Glow Wire Test	960 °C @Thickness 0.800 mm	1760 °F @Thickness 0.0315 in	Glow Wire Flammability Index; IEC 694-2-12
	960 °C @Thickness 3.20 mm	1760 °F @Thickness 0.126 in	Glow Wire Flammability Index; IEC 694-2-12

Processing Properties	Metric	English	Comments
Nozzle Temperature	275 - 285 °C	527 - 545 °F
Zone 1	260 - 280 °C	500 - 536 °F	hopper
Zone 2	260 - 280 °C	500 - 536 °F
Zone 3	270 - 280 °C	518 - 536 °F
Zone 4	275 - 285 °C	527 - 545 °F
Melt Temperature	275 - 290 °C	527 - 554 °F	Do not melt above 290°C
Mold Temperature	90.0 - 110 °C	194 - 230 °F	Preferred
Drying Temperature	80.0 - 85.0 °C	176 - 185 °F
Dry Time	4 hour	4 hour
Injection Pressure	70.0 - 100 MPa	10200 - 14500 psi

Descriptive Properties
Clamping Force	in tons, 0.7 times the projected surface area in cm²
Flammability Rating	SE	FMVSS No. 302, 355x100x1 mm
Heat Resistance - Ball Test	OK	at 125°C, IEC 309
	OK	at 165°C, IEC 309
Holding Pressure	90 MPa
Needle Test	OK	IEC 695-2-2, 1 or 2 mm