颗粒样图：
物性表:
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.69 g/cc | 1.69 g/cc | |||
| Filler Content | 60 % | 60 % | Long Glass Fiber | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Ultimate | 276 MPa | 40000 psi | |||
| Tensile Modulus | 21.4 GPa | 3100 ksi | |||
| Flexural Strength | 427 MPa | 62000 psi | |||
| Flexural Modulus | 19.3 GPa | 2800 ksi | |||
| Izod Impact, Notched | 4.27 J/cm | 8.00 ft-lb/in | |||
| Thermal Properties | Metric | English | Comments | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 260 °C | 500 °F | |||
| Processing Properties | Metric | English | Comments | ||
| Rear Barrel Temperature | 260 °C | 500 °F | |||
| Middle Barrel Temperature | 266 °C | 510 °F | |||
| Front Barrel Temperature | 271 °C | 520 °F | |||
| Nozzle Temperature | 271 °C | 520 °F | |||
| Melt Temperature | 266 - 277 °C | 510 - 530 °F | |||
| Mold Temperature | 79.4 °C | 175 °F | |||
| Drying Temperature | 85.0 °C | 185 °F | |||
| Dry Time | 4 hour | 4 hour | |||
| Dew Point | -28.9 °C | -20.0 °F | |||
| Injection Pressure | 68.9 MPa | 10000 psi | |||
| Screw Speed | 50 - 75 rpm | 50 - 75 rpm | |||
| De |
|||||
| Nozzle ID | 0.25 Inches | ||||
| Screw Design | 20:1 L/D | ||||
应用：广泛用于制造机械、汽车、化学与电气装置的零件，如齿轮、滚子、滑轮、辊轴、泵体中叶轮、风扇叶片、高压密封围、阀座、垫片、衬套、各种把手、支撑架、电线包内层等。
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636
QQ ：205730283
邮 箱 ：205730283@qq.com