颗粒样图: 、
应用:广泛用于制造机械、汽车、化学与电气装置的零件,如齿轮、滚子、滑轮、辊轴、泵体中叶轮、风扇叶片、高压密封围、阀座、垫片、衬套、各种把手、支撑架、电线包内层等。
上海松翰塑化科技有限公司,供应原料,品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询:
联系人: 夏先生
手 机:13501802636
QQ :205730283
邮 箱 :205730283@qq.com
物性表:
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.2784 g/cc | 0.046185 lb/in³ | Melt; ISO 1183 | ||
1.49 g/cc | 0.0538 lb/in³ | ISO 1183 | |||
Water Absorption | 0.90 % | 0.90 % | 24 hour; ISO Test | ||
5.2 % | 5.2 % | ISO 62 | |||
Moisture Absorption at Equilibrium | 1.5 % | 1.5 % | 23°C/50% R.H.; ISO 62 | ||
Relative Viscosity | 2.6 cP | 2.6 cP | ISO Test; 96 % SAV | ||
Viscosity Measurement | 50 | 50 | Formic Acid | ||
Linear Mold Shrinkage | 0.0020 cm/cm | 0.0020 in/in | ASTM Data; MD | ||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Rockwell R | 121 | 121 | ASTM Test | ||
Tensile Strength at Break | 230 MPa | 33400 psi | 0.2 in/min; ASTM Test | ||
Tensile Strength, Ultimate | 215 MPa | 31200 psi | 5mm/min; ISO 527 | ||
Elongation at Break | 2.0 % | 2.0 % | 0.2 in/min; ASTM Test | ||
3.0 % | 3.0 % | 5mm/min; ISO 527 | |||
Tensile Modulus | 13.5 GPa | 1960 ksi | 1mm/min; ISO 527 | ||
Flexural Strength | 325 MPa | 47100 psi | ISO Data | ||
352 MPa | 51100 psi | ASTM Test | |||
138 MPa @Temperature 120 °C |
20000 psi @Temperature 248 °F |
ASTM Test | |||
160 MPa @Temperature 93.0 °C |
23200 psi @Temperature 199 °F |
ASTM Test | |||
220 MPa @Temperature 65.0 °C |
31900 psi @Temperature 149 °F |
ASTM Test | |||
450 MPa @Temperature -40.0 °C |
65300 psi @Temperature -40.0 °F |
ASTM Test | |||
Flexural Modulus | 11.4 GPa | 1650 ksi | ISO Data | ||
11.7 GPa | 1700 ksi | ASTM Test | |||
4.83 GPa @Temperature 120 °C |
701 ksi @Temperature 248 °F |
ASTM Test | |||
7.00 GPa @Temperature 65.0 °C |
1020 ksi @Temperature 149 °F |
ASTM Test | |||
Izod Impact, Notched | 1.34 J/cm @Thickness 3.17 mm |
2.51 ft-lb/in @Thickness 0.125 in |
ASTM Test | ||
Izod Impact, Notched (ISO) | 14.0 kJ/m² | 6.66 ft-lb/in² | ISO Test | ||
11.0 kJ/m² @Temperature -40.0 °C |
5.23 ft-lb/in² @Temperature -40.0 °F |
ISO Test | |||
Charpy Impact Unnotched | 9.00 J/cm² | 42.8 ft-lb/in² | ISO 179 | ||
Charpy Impact, Notched | 2.10 J/cm² | 9.99 ft-lb/in² | ISO 179 | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear | 31.0 µm/m-°C @Temperature -30.0 - 30.0 °C |
17.2 µin/in-°F @Temperature -22.0 - 86.0 °F |
ASTM Test | ||
CTE, linear, Parallel to Flow | 32.0 µm/m-°C | 17.8 µin/in-°F | ISO 11359 | ||
CTE, linear, Transverse to Flow | 79.0 µm/m-°C | 43.9 µin/in-°F | ISO 11359 | ||
Specific Heat Capacity | 2.522 J/g-°C | 0.6028 BTU/lb-°F | Melt | ||
Thermal Conductivity | 0.329 W/m-K | 2.28 BTU-in/hr-ft²-°F | Melt | ||
Melting Point | 220 °C | 428 °F | ASTM Test | ||
220 °C | 428 °F | 10 K/min | |||
Deflection Temperature at 0.46 MPa (66 psi) | 220 °C | 428 °F | ISO 75 | ||
Deflection Temperature at 1.8 MPa (264 psi) | 210 °C | 410 °F | ISO 75 | ||
212 °C | 414 °F | ASTM Test | |||
Flammability, UL94 | HB | HB | |||
HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
||||
De |
|||||
Color | Natural | ||||
Commercial Status | Active America | ||||
Form | Pellets | ||||
Impact Modified | No | ||||
Primary Processing Technique | Injection Molding | ||||
Processing | Injection Molding | ||||
Special characteristic | Heat stabilized or stable to heat | ||||
UL.UL-C | Yes |