类别：聚合物；热塑性塑料；丙烯酸（有机玻璃）；丙烯酸，耐热性
材质说明：高耐热和耐高温的有机玻璃等级。推荐用于板材、管材和型材的挤压。也可用于注塑成型的小零件。可能是紫外线稳定。一般的幸运有机玻璃的品质：透明/优雅的外观，高耐热性和耐候性，优良的耐化学性和着色能力。
物性表：| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.18 g/cc | 0.0426 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.0020 - 0.0060 cm/cm | 0.0020 - 0.0060 in/in | ASTM D955-51 |
| Melt Flow | 1.0 g/10 min | 1.0 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 97 | 97 | ASTM D785 |
| Tensile Strength, Ultimate | 74.0 MPa | 10700 psi | ASTM D638 |
| Elongation at Break | 3.5 % | 3.5 % | ASTM D638 |
| Flexural Yield Strength | 133 MPa | 19300 psi | ASTM D790 |
| Flexural Modulus | 3.30 GPa | 479 ksi | ASTM D790 |
| Electrical Properties | Metric | English | Comments |
| Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 98.0 °C | 208 °F | Heat Distortion Temp |
| 98.0 °C | 208 °F | Deflection Temp; Load not reported; ASTM D648 | |
| Vicat Softening Point | 105 °C | 221 °F | ASTM D1525 |
Flammability, UL94  |
HB @Thickness 1.60 mm |
HB @Thickness 0.0630 in |
|
| HB @Thickness 3.17 mm |
HB @Thickness 0.125 in |
||
| Optical Properties | Metric | English | Comments |
| Refractive Index | 1.49 | 1.49 | ASTM D542 |
| Transmission, Visible | 92 % | 92 % | ASTM D1003 |
上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
欢迎新老客户来电咨询;
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com