| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.27 g/cc | 1.27 g/cc | ASTM D792 |
| Water Absorption | 0.25 % @Temperature 22.8 °C, Time 86400 sec |
0.25 % @Temperature 73.0 °F, Time 24.0 hour |
ASTM D570 |
| Water Absorption at Saturation | 1.25 % @Temperature 22.8 °C |
1.25 % @Temperature 73.0 °F |
ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 109 | 109 | ASTM D785 |
| Tensile Strength at Break | 105 MPa @Temperature 22.8 °C |
15200 psi @Temperature 73.0 °F |
ASTM D638 |
| Elongation at Break | 40 % @Temperature 22.8 °C |
40 % @Temperature 73.0 °F |
ASTM D638 |
| Elongation at Yield | 7.0 - 8.0 % | 7.0 - 8.0 % | ASTM D638 |
| Tensile Modulus | 2.96 GPa @Temperature 22.8 °C |
430 ksi @Temperature 73.0 °F |
ASTM D638 |
| Flexural Strength | 152 MPa @Temperature 22.8 °C |
22000 psi @Temperature 73.0 °F |
ASTM D790 |
| Flexural Modulus | 3.31 GPa @Temperature 22.8 °C |
480 ksi @Temperature 73.0 °F |
ASTM D790 |
| Compressive Strength | 151 MPa | 21900 psi | ASTM D695 |
| Compressive Modulus | 3.31 GPa | 480 ksi | ASTM D695 |
| Shear Strength | 103 MPa | 15000 psi | Ultimate |
| Izod Impact, Notched | 0.534 J/cm | 1.00 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+17 ohm-cm | 1.00e+17 ohm-cm | 1/16''; ASTM D257 |
| Dielectric Constant | 3.15 @Frequency 1000 Hz |
3.15 @Frequency 1000 Hz |
50% RH; ASTM D150 |
| Dielectric Strength | 28.0 kV/mm | 710 kV/in | In Oil; ASTM D149 |
| 32.7 kV/mm | 830 kV/in | In Air; ASTM D149 | |
| Dissipation Factor | 0.0013 @Frequency 1000 Hz, Temperature 22.8 °C |
0.0013 @Frequency 1000 Hz, Temperature 73.0 °F |
50% RH; ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear, Parallel to Flow | 55.8 µm/m-°C | 31.0 µin/in-°F | ASTM D696 |
| Thermal Conductivity | 0.216 W/m-K | 1.50 BTU-in/hr-ft²-°F | ASTM D2214 |
| Deflection Temperature at 0.46 MPa (66 psi) | 210 °C | 410 °F | 1/4''; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 201 °C | 394 °F | 1/4''; ASTM D648 |
| Vicat Softening Point | 219 °C | 426 °F | ASTM D1525 |
| Flammability, UL94 | V-0 | V-0 | |
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636 021 51131842
QQ ：205730283
邮 箱 ：205730283@qq.com
沙伯 PEI 1000 图：
