塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. pa66/美国杜邦/10B140 BK061 耐磨损 防火级

pa66/美国杜邦/10B140 BK061 耐磨损 防火级

pa66/美国杜邦/10B140 BK061 耐磨损 防火级
 参考图片：

颗粒图片：

包装图片：

成品图片：
images (7)

 

 

 
Physical Properties Metric English Comments
Density  1.28 g/cc 0.0462 lb/in³  
  1.50 g/cc 0.0542 lb/in³ DAM; ISO 1183
Water Absorption  5.0 %
@Thickness 2.00 mm		 5.0 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  1.60 %
@Thickness 2.00 mm		 1.60 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Viscosity   29000 cP
@Shear Rate 5000 1/s,
Temperature 315 °C		 29000 cP
@Shear Rate 5000 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  52000 cP
@Shear Rate 5000 1/s,
Temperature 295 °C		 52000 cP
@Shear Rate 5000 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  61000 cP
@Shear Rate 500 1/s,
Temperature 315 °C		 61000 cP
@Shear Rate 500 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  96000 cP
@Shear Rate 5000 1/s,
Temperature 275 °C		 96000 cP
@Shear Rate 5000 1/s,
Temperature 527 °F		 ISO 11403-1 -2
  112000 cP
@Shear Rate 500 1/s,
Temperature 295 °C		 112000 cP
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  217000 cP
@Shear Rate 500 1/s,
Temperature 275 °C		 217000 cP
@Shear Rate 500 1/s,
Temperature 527 °F		 ISO 11403-1 -2
Viscosity Test  150 cm³/g 150 cm³/g DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.010 cm/cm 0.010 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.011 cm/cm 0.011 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  54.0 MPa 7830 psi 50%RH; ISO 527-1/-2
  82.0 MPa 11900 psi DAM; ISO 527-1/-2
Tensile Stress   14.5 MPa
@Strain 1.33 %,
Temperature 90.0 °C		 2100 psi
@Strain 1.33 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  18.0 MPa
@Strain 1.63 %,
Temperature 90.0 °C		 2610 psi
@Strain 1.63 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  19.0 MPa
@Strain 0.160 %,
Temperature -20.0 °C		 2760 psi
@Strain 0.160 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  21.0 MPa
@Strain 1.20 %,
Temperature 40.0 °C		 3050 psi
@Strain 1.20 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  22.0 MPa
@Strain 0.280 %,
Temperature 23.0 °C		 3190 psi
@Strain 0.280 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  22.7 MPa
@Strain 0.250 %,
Temperature 0.000 °C		 3290 psi
@Strain 0.250 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  28.0 MPa
@Strain 0.380 %,
Temperature 0.000 °C		 4060 psi
@Strain 0.380 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  30.0 MPa
@Strain 0.940 %,
Temperature 23.0 °C		 4350 psi
@Strain 0.940 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  31.9 MPa
@Strain 5.32 %,
Temperature 90.0 °C		 4630 psi
@Strain 5.32 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  33.0 MPa
@Strain 0.430 %,
Temperature -20.0 °C		 4790 psi
@Strain 0.430 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  35.0 MPa
@Strain 0.520 %,
Temperature 40.0 °C		 5080 psi
@Strain 0.520 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  35.4 MPa
@Strain 9.31 %,
Temperature 90.0 °C		 5130 psi
@Strain 9.31 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  36.8 MPa
@Strain 6.52 %,
Temperature 90.0 °C		 5340 psi
@Strain 6.52 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  41.1 MPa
@Strain 11.4 %,
Temperature 90.0 °C		 5960 psi
@Strain 11.4 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  44.3 MPa
@Strain 4.80 %,
Temperature 40.0 °C		 6430 psi
@Strain 4.80 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  49.0 MPa
@Strain 8.40 %,
Temperature 40.0 °C		 7110 psi
@Strain 8.40 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  55.7 MPa
@Strain 3.76 %,
Temperature 23.0 °C		 8080 psi
@Strain 3.76 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  58.7 MPa
@Strain 6.58 %,
Temperature 23.0 °C		 8510 psi
@Strain 6.58 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  64.1 MPa
@Strain 1.52 %,
Temperature 0.000 °C		 9300 psi
@Strain 1.52 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  65.1 MPa
@Strain 0.800 %,
Temperature -20.0 °C		 9440 psi
@Strain 0.800 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  66.1 MPa
@Strain 1.12 %,
Temperature 23.0 °C		 9590 psi
@Strain 1.12 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  66.7 MPa
@Strain 2.08 %,
Temperature 40.0 °C		 9670 psi
@Strain 2.08 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  67.5 MPa
@Strain 1.00 %,
Temperature 0.000 °C		 9790 psi
@Strain 1.00 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  72.0 MPa
@Strain 1.72 %,
Temperature -20.0 °C		 10400 psi
@Strain 1.72 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  75.6 MPa
@Strain 2.66 %,
Temperature 0.000 °C		 11000 psi
@Strain 2.66 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  77.6 MPa
@Strain 3.80 %,
Temperature 0.000 °C		 11300 psi
@Strain 3.80 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  81.6 MPa
@Strain 3.01 %,
Temperature -20.0 °C		 11800 psi
@Strain 3.01 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  87.0 MPa
@Strain 1.75 %,
Temperature 0.000 °C		 12600 psi
@Strain 1.75 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  87.3 MPa
@Strain 1.96 %,
Temperature 23.0 °C		 12700 psi
@Strain 1.96 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  88.3 MPa
@Strain 1.28 %,
Temperature -20.0 °C		 12800 psi
@Strain 1.28 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  92.6 MPa
@Strain 2.80 %,
Temperature 23.0 °C		 13400 psi
@Strain 2.80 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  96.5 MPa
@Strain 2.50 %,
Temperature 0.000 °C		 14000 psi
@Strain 2.50 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  4.00 MPa
@Strain 0.230 %,
Time 36000 sec		 580 psi
@Strain 0.230 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  4.00 MPa
@Strain 0.260 %,
Time 360000 sec		 580 psi
@Strain 0.260 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  4.00 MPa
@Strain 0.190 %,
Time 3600 sec		 580 psi
@Strain 0.190 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  4.00 MPa
@Strain 0.300 %,
Time 3.60e+6 sec		 580 psi
@Strain 0.300 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  4.00 MPa
@Strain 0.350 %,
Time 3.60e+7 sec		 580 psi
@Strain 0.350 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  15.0 MPa
@Strain 1.68 %,
Time 3.60e+7 sec		 2180 psi
@Strain 1.68 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  15.0 MPa
@Strain 1.39 %,
Time 3.60e+6 sec		 2180 psi
@Strain 1.39 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  15.0 MPa
@Strain 0.780 %,
Time 3600 sec		 2180 psi
@Strain 0.780 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  15.0 MPa
@Strain 1.14 %,
Time 360000 sec		 2180 psi
@Strain 1.14 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  15.0 MPa
@Strain 0.970 %,
Time 36000 sec		 2180 psi
@Strain 0.970 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
Elongation at Break  3.5 % 3.5 % DAM; ISO 527-1/-2
  9.0 % 9.0 % 50%RH; ISO 527-1/-2
Tensile Modulus  3.80 GPa 551 ksi 50%RH; ISO 527-1/-2
  6.60 GPa 957 ksi DAM; ISO 527-1/-2
Shear Modulus   0.399 GPa
@Temperature 160 °C		 57.9 ksi
@Temperature 320 °F		 50%RH; Dynamic; ISO 11403-1 -2
  0.407 GPa
@Temperature 160 °C		 59.0 ksi
@Temperature 320 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.500 GPa
@Temperature 120 °C		 72.5 ksi
@Temperature 248 °F		 50%RH; Dynamic; ISO 11403-1 -2
  0.505 GPa
@Temperature 120 °C		 73.2 ksi
@Temperature 248 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.009 GPa
@Temperature 70.0 °C		 146.3 ksi
@Temperature 158 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.19 GPa
@Temperature 70.0 °C		 173 ksi
@Temperature 158 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.26 GPa
@Temperature 20.0 °C		 328 ksi
@Temperature 68.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.329 GPa
@Temperature 20.0 °C		 337.8 ksi
@Temperature 68.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.41 GPa
@Temperature -20.0 °C		 350 ksi
@Temperature -4.00 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.504 GPa
@Temperature -20.0 °C		 363.2 ksi
@Temperature -4.00 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.55 GPa
@Temperature -50.0 °C		 370 ksi
@Temperature -58.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.692 GPa
@Temperature -50.0 °C		 390.4 ksi
@Temperature -58.0 °F		 DAM; Dynamic; ISO 11403-1 -2
Shear Strength   0.0305 MPa
@Shear Rate 500 1/s,
Temperature 315 °C		 4.42 psi
@Shear Rate 500 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  0.0560 MPa
@Shear Rate 500 1/s,
Temperature 295 °C		 8.12 psi
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  0.1085 MPa
@Shear Rate 500 1/s,
Temperature 275 °C		 15.74 psi
@Shear Rate 500 1/s,
Temperature 527 °F		 ISO 11403-1 -2
Secant Modulus   0.923 GPa
@Strain 4.80 %,
Temperature 40.0 °C		 134 ksi
@Strain 4.80 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  1.48 GPa
@Strain 3.76 %,
Temperature 23.0 °C		 215 ksi
@Strain 3.76 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1.75 GPa
@Strain 1.20 %,
Temperature 40.0 °C		 254 ksi
@Strain 1.20 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  2.52 GPa
@Strain 3.04 %,
Temperature 0.000 °C		 366 ksi
@Strain 3.04 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  3.19 GPa
@Strain 0.940 %,
Temperature 23.0 °C		 463 ksi
@Strain 0.940 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3.21 GPa
@Strain 2.08 %,
Temperature 40.0 °C		 465 ksi
@Strain 2.08 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  4.04 GPa
@Strain 2.24 %,
Temperature 23.0 °C		 585 ksi
@Strain 2.24 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  4.19 GPa
@Strain 1.72 %,
Temperature -20.0 °C		 607 ksi
@Strain 1.72 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  4.22 GPa
@Strain 1.52 %,
Temperature 0.000 °C		 612 ksi
@Strain 1.52 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  4.545 GPa
@Strain 2.00 %,
Temperature 0.000 °C		 659.2 ksi
@Strain 2.00 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  5.90 GPa
@Strain 1.12 %,
Temperature 23.0 °C		 856 ksi
@Strain 1.12 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  6.60 GPa
@Strain 1.44 %,
Temperature -20.0 °C		 957 ksi
@Strain 1.44 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  6.73 GPa
@Strain 0.520 %,
Temperature 40.0 °C		 976 ksi
@Strain 0.520 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  6.75 GPa
@Strain 1.00 %,
Temperature 0.000 °C		 979 ksi
@Strain 1.00 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  7.37 GPa
@Strain 0.380 %,
Temperature 0.000 °C		 1070 ksi
@Strain 0.380 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  7.67 GPa
@Strain 0.430 %,
Temperature -20.0 °C		 1110 ksi
@Strain 0.430 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  7.86 GPa
@Strain 0.280 %,
Temperature 23.0 °C		 1140 ksi
@Strain 0.280 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  8.1375 GPa
@Strain 0.800 %,
Temperature -20.0 °C		 1180.3 ksi
@Strain 0.800 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  9.08 GPa
@Strain 0.250 %,
Temperature 0.000 °C		 1320 ksi
@Strain 0.250 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  11.875 GPa
@Strain 0.160 %,
Temperature -20.0 °C		 1722.3 ksi
@Strain 0.160 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
Izod Impact, Notched (ISO)  3.50 kJ/m² 1.67 ft-lb/in² DAM; ISO 180/1A
  4.00 kJ/m² 1.90 ft-lb/in² 50%RH; ISO 180/1A
Charpy Impact Unnotched  3.50 J/cm² 16.7 ft-lb/in² DAM; ISO 179/1eU
  6.00 J/cm² 28.6 ft-lb/in² 50%RH; ISO 179/1eU
  2.50 J/cm²
@Temperature -30.0 °C		 11.9 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
  2.50 J/cm²
@Temperature -30.0 °C		 11.9 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
Charpy Impact, Notched  0.350 J/cm² 1.67 ft-lb/in² DAM; ISO 179/1eA
  0.450 J/cm² 2.14 ft-lb/in² 50%RH; ISO 179/1eA
  0.200 J/cm²
@Temperature -30.0 °C		 0.952 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eA
  0.350 J/cm²
@Temperature -30.0 °C		 1.67 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
Tensile Creep Modulus, 1 hour   342 MPa
@Pressure 20.0 MPa,
Temperature 120 °C		 49700 psi
@Pressure 2900 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  493 MPa
@Pressure 15.0 MPa,
Temperature 120 °C		 71600 psi
@Pressure 2180 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  549 MPa
@Pressure 10.0 MPa,
Temperature 120 °C		 79700 psi
@Pressure 1450 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  622 MPa
@Pressure 14.0 MPa,
Temperature 100 °C		 90200 psi
@Pressure 2030 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  632 MPa
@Pressure 12.0 MPa,
Temperature 100 °C		 91700 psi
@Pressure 1740 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  642 MPa
@Pressure 10.0 MPa,
Temperature 100 °C		 93100 psi
@Pressure 1450 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  647 MPa
@Pressure 18.0 MPa,
Temperature 90.0 °C		 93900 psi
@Pressure 2610 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  649 MPa
@Pressure 8.00 MPa,
Temperature 100 °C		 94200 psi
@Pressure 1160 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  656 MPa
@Pressure 6.00 MPa,
Temperature 100 °C		 95200 psi
@Pressure 870 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  661 MPa
@Pressure 4.00 MPa,
Temperature 100 °C		 95900 psi
@Pressure 580 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  664 MPa
@Pressure 2.00 MPa,
Temperature 100 °C		 96300 psi
@Pressure 290 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  667 MPa
@Pressure 5.00 MPa,
Temperature 120 °C		 96700 psi
@Pressure 725 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  667 MPa
@Pressure 15.0 MPa,
Temperature 90.0 °C		 96700 psi
@Pressure 2180 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  695 MPa
@Pressure 10.0 MPa,
Temperature 90.0 °C		 101000 psi
@Pressure 1450 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  714 MPa
@Pressure 5.00 MPa,
Temperature 90.0 °C		 104000 psi
@Pressure 725 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  971 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 141000 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1020 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 149000 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1070 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 155000 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1100 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 159000 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1290 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 187000 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1481.1 MPa
@Pressure 25.0 MPa,
Temperature 23.0 °C		 214820 psi
@Pressure 3630 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1740 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 252000 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1920 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 279000 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2020.2 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 293010 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2093.6 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 303650 psi
@Pressure 725 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2100 MPa
@Time 3600 sec		 305000 psi
@Time 1.00 hour		 50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours   204.29 MPa
@Pressure 20.0 MPa,
Temperature 120 °C		 29630 psi
@Pressure 2900 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  364 MPa
@Pressure 15.0 MPa,
Temperature 120 °C		 52800 psi
@Pressure 2180 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  430 MPa
@Pressure 14.0 MPa,
Temperature 100 °C		 62400 psi
@Pressure 2030 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  435.97 MPa
@Pressure 12.0 MPa,
Temperature 100 °C		 63232 psi
@Pressure 1740 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  441 MPa
@Pressure 10.0 MPa,
Temperature 100 °C		 64000 psi
@Pressure 1450 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  442 MPa
@Pressure 10.0 MPa,
Temperature 120 °C		 64200 psi
@Pressure 1450 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  444 MPa
@Pressure 8.00 MPa,
Temperature 100 °C		 64500 psi
@Pressure 1160 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  448 MPa
@Pressure 6.00 MPa,
Temperature 100 °C		 64900 psi
@Pressure 870 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  450 MPa
@Pressure 4.00 MPa,
Temperature 100 °C		 65200 psi
@Pressure 580 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  452 MPa
@Pressure 2.00 MPa,
Temperature 100 °C		 65500 psi
@Pressure 290 psi,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  478 MPa
@Pressure 18.0 MPa,
Temperature 90.0 °C		 69300 psi
@Pressure 2610 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  490 MPa
@Pressure 15.0 MPa,
Temperature 90.0 °C		 71000 psi
@Pressure 2180 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  507 MPa
@Pressure 10.0 MPa,
Temperature 90.0 °C		 73500 psi
@Pressure 1450 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  515 MPa
@Pressure 5.00 MPa,
Temperature 90.0 °C		 74700 psi
@Pressure 725 psi,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  519 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 75300 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  525 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 76200 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  542 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 78700 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  562 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 81500 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  568 MPa
@Pressure 5.00 MPa,
Temperature 120 °C		 82400 psi
@Pressure 725 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  571.1 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 82830 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  699 MPa
@Pressure 25.0 MPa,
Temperature 23.0 °C		 101000 psi
@Pressure 3630 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  975.61 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 141500 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1080 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 157000 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1250 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 181000 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1320 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 192000 psi
@Pressure 725 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1300 MPa
@Time 3.60e+6 sec		 189000 psi
@Time 1000 hour		 50%RH; ISO 899-1
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+12 ohm-cm 1.00e+12 ohm-cm 50%RH; IEC 60093
Surface Resistance  >= 1.00e+15 ohm >= 1.00e+15 ohm 50%RH; IEC 60093
Dielectric Constant   3.9
@Frequency 1.00e+6 Hz		 3.9
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  4.5
@Frequency 1.00e+6 Hz		 4.5
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  4.5
@Frequency 100 Hz		 4.5
@Frequency 100 Hz		 DAM; IEC 60250
  9.4
@Frequency 100 Hz		 9.4
@Frequency 100 Hz		 50%RH; IEC 60250
Dielectric Strength  40.0 kV/mm 1020 kV/in DAM; IEC 60243-1
Dissipation Factor   0.011
@Frequency 100 Hz		 0.011
@Frequency 100 Hz		 DAM; IEC 60250
  0.023
@Frequency 1.00e+6 Hz		 0.023
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  0.055
@Frequency 1.00e+6 Hz		 0.055
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  0.21
@Frequency 100 Hz		 0.21
@Frequency 100 Hz		 50%RH; IEC 60250
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  65.0 µm/m-°C 36.1 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  90.0 µm/m-°C 50.0 µin/in-°F DAM; ISO 11359-1/-2
Melting Point  263 °C 505 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  240 °C 464 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  170 °C 338 °F DAM; ISO 75-1/-2
Vicat Softening Point  245 °C 473 °F DAM; 50°C/h 50N; ISO 306
Flammability, UL94   HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 DAM; IEC 60695-11-10
  HB
@Thickness 0.700 mm		 HB
@Thickness 0.0276 in		 DAM; IEC 60695-11-10
 
Descriptive Properties
Additives Release agent  
Delivery form Pellets  
Part Marking Code >PA66-MD40< ISO 11469
Processing Injection Moulding  
Regional Availability Europe  
  Near East/Africa  
Resin Identification PA66-MD40  
UL recognition UL DAM

概述

PA塑料(尼龙，聚酰胺)，英文名称:Polyamide

PA的品种繁多，有PA6、PA66、PAll、PAl2、PA46、PA610、PA612、PAl010等，以及近几年开发的半芳香族尼龙PA6T和特种尼龙等很多新品种。

物理性能

比重：PA6 1.14克/立方厘米，PA66 1.15克/立方厘米，PA1010 1.05克/立方厘米

成型收缩率：PA6 0.8-2.5% ，PA66 1.5-2.2%

成型温度：220-300℃

干燥条件：100-110℃/12小时

坚韧、耐磨、耐油、,耐水、抗酶菌、但吸水大

燃烧鉴别方法：火焰上端黄色，下端蓝色，燃烧后塑料熔滴落，起泡，离火后特殊的羊毛，指甲烧焦味和带芹菜味

尼龙6：

弹性好，冲击强度，吸水较大

尼龙66：

性能优于尼龙6，强度高，耐磨性好

尼龙610：

与尼龙66相似，但吸水小，刚度低

尼龙1010：

半透明，吸水小。耐寒性较好。适于制作一般机械零件、减磨耐磨零件、传动零件以及化工、电器、仪表等零件

成型性能

1、结晶料，熔点较高，熔融温度范围窄，热稳定性差，料温超过300度、滞留时间超过30分钟即分解。较易吸湿，需干燥，含水量不得超过0.3%。

2、流动性好，易溢料。宜用自锁时喷嘴，并应加热。

3、成型收缩范围及收缩率大，方向性明显，易发生缩孔、变形等。

4、模温按塑件壁厚在20～90度范围内选取，注射压力按注射机类型、料温、塑件形状尺寸、模具浇注系统选定，成型周期按塑件壁厚选定。树脂粘度小时，注射、冷却时间应取长，并用白油作脱模剂。

5、模具浇注系统的形式和尺寸，增大流道和浇口尺寸可减少缩水。

聚酰胺的不足之处在于：由于热膨胀和吸水性所至的尺寸精度不够，耐酸性差，硬度和弹性模量不够。经改良以后，也是比较优秀的工程塑料之一。

应用

汽车制造方面

用于制造燃料滤网、燃料过滤器、罐、捕集器、储油槽、发动机汽缸盖罩、散热器水缸、平衡旋转轴齿轮。也可用在汽车的电器配件、接线柱等。另外，它还可用作驱动、控制部件等。

电器电子工业

可用于制造电饭锅、电动吸尘器、高频电子食品加热器，电器产品的接线柱、开关和电阻器等。

医疗器械仪器

用于医用输血管、取血器、输液器等。PA单丝可做外科手术缝线、假发等；另外，电子打字机的数字旋转盘、接线柱、传动齿轮、印刷机的带式过滤片等。

其它方面

用于制作一次性打火机体、碱性干电池衬垫，摩托车驾驶员的头盔，办公机器外壳，办公用椅的角轮、座和靠背，冰鞋、钓鱼线等，PA薄膜气体阻隔性能优良，而且耐油性、耐低温冲击性、耐穿透性好，可用于肉、火腿肠等冷冻食品的包装。聚酰胺还可棒材和板材，也作齿轮或其它传动装置。

上海浩铭塑胶有限公司！本公司承诺，所有产品都是原厂家，原包装一线独家营销！

可提供以下报告：COA（产地证明）SGS（检测报告）MSDS（成分报告）FDA（食品安全报告）UL黄卡（出口报告）正规发票！欢迎新老客户来电咨询：

联系人：邓小姐

联系电话：13917657923

联系QQ:996152797

联系邮箱：996152797@qq.com

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-39742.html

免责声明: 本文 pa66/美国杜邦/10B140 BK061 耐磨损 防火级 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4