塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66/美国杜邦/11C140 NC010阻燃本色耐高温

PA66/美国杜邦/11C140 NC010阻燃本色耐高温

PA66/美国杜邦/11C140 NC010阻燃本色耐高温
 参考图片：

颗粒图片：

包装图片：

成品图片：
images (5)

 

 

 
Physical Properties Metric English Comments
Density  1.27 g/cc 0.0459 lb/in³  
  1.45 g/cc 0.0524 lb/in³ DAM; ISO 1183
Water Absorption  5.7 %
@Thickness 2.00 mm		 5.7 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  1.80 %
@Thickness 2.00 mm		 1.80 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Viscosity   61000 cP
@Shear Rate 5000 1/s,
Temperature 315 °C		 61000 cP
@Shear Rate 5000 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  97000 cP
@Shear Rate 5000 1/s,
Temperature 295 °C		 97000 cP
@Shear Rate 5000 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  119000 cP
@Shear Rate 500 1/s,
Temperature 315 °C		 119000 cP
@Shear Rate 500 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  149000 cP
@Shear Rate 5000 1/s,
Temperature 275 °C		 149000 cP
@Shear Rate 5000 1/s,
Temperature 527 °F		 ISO 11403-1 -2
  244000 cP
@Shear Rate 500 1/s,
Temperature 295 °C		 244000 cP
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  490000 cP
@Shear Rate 500 1/s,
Temperature 275 °C		 490000 cP
@Shear Rate 500 1/s,
Temperature 527 °F		 ISO 11403-1 -2
Viscosity Test  140 cm³/g 140 cm³/g DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.014 cm/cm 0.014 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.014 cm/cm 0.014 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Hardness, Rockwell M  86 86 DAM; ISO 2039-2
Hardness, Rockwell R  120 120 DAM; ISO 2039-2
Tensile Strength at Break  60.0 MPa 8700 psi 50%RH; ISO 527-1/-2
  89.0 MPa 12900 psi DAM; ISO 527-1/-2
Tensile Stress   16.0 MPa
@Strain 3.03 %,
Temperature 90.0 °C		 2320 psi
@Strain 3.03 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  20.0 MPa
@Strain 3.36 %,
Temperature 90.0 °C		 2900 psi
@Strain 3.36 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  25.0 MPa
@Strain 3.03 %,
Temperature 40.0 °C		 3630 psi
@Strain 3.03 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  27.1 MPa
@Strain 0.350 %,
Temperature 23.0 °C		 3930 psi
@Strain 0.350 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  30.0 MPa
@Strain 2.24 %,
Temperature 23.0 °C		 4350 psi
@Strain 2.24 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  31.2 MPa
@Strain 0.360 %,
Temperature 0.000 °C		 4530 psi
@Strain 0.360 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  33.8 MPa
@Strain 0.360 %,
Temperature -20.0 °C		 4900 psi
@Strain 0.360 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  35.0 MPa
@Strain 12.1 %,
Temperature 90.0 °C		 5080 psi
@Strain 12.1 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  36.6 MPa
@Strain 21.2 %,
Temperature 90.0 °C		 5310 psi
@Strain 21.2 %,
Temperature 194 °F		 50%RH; ISO 11403-1 -2
  37.0 MPa
@Strain 1.26 %,
Temperature 40.0 °C		 5370 psi
@Strain 1.26 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  40.8 MPa
@Strain 13.4 %,
Temperature 90.0 °C		 5920 psi
@Strain 13.4 %,
Temperature 194 °F		 DAM; ISO 11403-1 -2
  48.0 MPa
@Strain 1.33 %,
Temperature 0.000 °C		 6960 psi
@Strain 1.33 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  48.7 MPa
@Strain 12.1 %,
Temperature 40.0 °C		 7060 psi
@Strain 12.1 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  51.9 MPa
@Strain 24.2 %,
Temperature 40.0 °C		 7530 psi
@Strain 24.2 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  52.3 MPa
@Strain 1.39 %,
Temperature -20.0 °C		 7590 psi
@Strain 1.39 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  53.7 MPa
@Strain 8.96 %,
Temperature 23.0 °C		 7790 psi
@Strain 8.96 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  58.3 MPa
@Strain 15.7 %,
Temperature 23.0 °C		 8460 psi
@Strain 15.7 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  68.1 MPa
@Strain 5.04 %,
Temperature 40.0 °C		 9880 psi
@Strain 5.04 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  70.0 MPa
@Strain 5.32 %,
Temperature 0.000 °C		 10200 psi
@Strain 5.32 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  70.6 MPa
@Strain 1.40 %,
Temperature 23.0 °C		 10200 psi
@Strain 1.40 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  74.5 MPa
@Strain 5.56 %,
Temperature -20.0 °C		 10800 psi
@Strain 5.56 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  74.7 MPa
@Strain 9.31 %,
Temperature 0.000 °C		 10800 psi
@Strain 9.31 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  78.0 MPa
@Strain 9.73 %,
Temperature -20.0 °C		 11300 psi
@Strain 9.73 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  82.1 MPa
@Strain 1.44 %,
Temperature 0.000 °C		 11900 psi
@Strain 1.44 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  86.1 MPa
@Strain 2.45 %,
Temperature 23.0 °C		 12500 psi
@Strain 2.45 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  91.9 MPa
@Strain 1.44 %,
Temperature -20.0 °C		 13300 psi
@Strain 1.44 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  100 MPa
@Strain 2.52 %,
Temperature 0.000 °C		 14500 psi
@Strain 2.52 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  111 MPa
@Strain 2.52 %,
Temperature -20.0 °C		 16100 psi
@Strain 2.52 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  1.50 MPa
@Strain 0.140 %,
Time 360000 sec		 218 psi
@Strain 0.140 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  1.50 MPa
@Strain 0.154 %,
Time 3.60e+6 sec		 218 psi
@Strain 0.154 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  1.50 MPa
@Strain 0.168 %,
Time 3.60e+7 sec		 218 psi
@Strain 0.168 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  1.50 MPa
@Strain 0.109 %,
Time 3600 sec		 218 psi
@Strain 0.109 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  1.50 MPa
@Strain 0.123 %,
Time 36000 sec		 218 psi
@Strain 0.123 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.159 %,
Time 36000 sec		 435 psi
@Strain 0.159 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.184 %,
Time 360000 sec		 435 psi
@Strain 0.184 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.249 %,
Time 3.60e+7 sec		 435 psi
@Strain 0.249 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.213 %,
Time 3.60e+6 sec		 435 psi
@Strain 0.213 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  3.00 MPa
@Strain 0.138 %,
Time 3600 sec		 435 psi
@Strain 0.138 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  8.00 MPa
@Strain 0.952 %,
Time 3.60e+7 sec		 1160 psi
@Strain 0.952 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  8.00 MPa
@Strain 0.875 %,
Time 3.60e+6 sec		 1160 psi
@Strain 0.875 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  8.00 MPa
@Strain 0.701 %,
Time 36000 sec		 1160 psi
@Strain 0.701 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  8.00 MPa
@Strain 0.618 %,
Time 3600 sec		 1160 psi
@Strain 0.618 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  8.00 MPa
@Strain 0.797 %,
Time 360000 sec		 1160 psi
@Strain 0.797 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 0.846 %,
Time 360000 sec		 1740 psi
@Strain 0.846 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 0.719 %,
Time 36000 sec		 1740 psi
@Strain 0.719 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 1.15 %,
Time 3.60e+7 sec		 1740 psi
@Strain 1.15 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 0.612 %,
Time 3600 sec		 1740 psi
@Strain 0.612 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 0.982 %,
Time 3.60e+6 sec		 1740 psi
@Strain 0.982 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
Elongation at Break  10 % 10 % DAM; ISO 527-1/-2
  24 % 24 % 50%RH; ISO 527-1/-2
Tensile Modulus  2.50 GPa 363 ksi 50%RH; ISO 527-1/-2
  5.80 GPa 841 ksi DAM; ISO 527-1/-2
  10.0 GPa
@Temperature 100 °C		 1450 ksi
@Temperature 212 °F		 DAM; ISO 11403-1 -2
  67.64 GPa
@Temperature -40.0 °C		 9810 ksi
@Temperature -40.0 °F		 DAM; ISO 11403-1 -2
Shear Modulus 0.275 GPa
@Temperature 160 °C		 39.9 ksi
@Temperature 320 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.341 GPa
@Temperature 120 °C		 49.5 ksi
@Temperature 248 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.518 GPa
@Temperature 70.0 °C		 75.1 ksi
@Temperature 158 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.91 GPa
@Temperature 20.0 °C		 277 ksi
@Temperature 68.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.12 GPa
@Temperature -20.0 °C		 307 ksi
@Temperature -4.00 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.27 GPa
@Temperature -50.0 °C		 329 ksi
@Temperature -58.0 °F		 DAM; Dynamic; ISO 11403-1 -2
Shear Strength   0.0595 MPa
@Shear Rate 500 1/s,
Temperature 315 °C		 8.63 psi
@Shear Rate 500 1/s,
Temperature 599 °F		 ISO 11403-1 -2
  0.122 MPa
@Shear Rate 500 1/s,
Temperature 295 °C		 17.7 psi
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  0.245 MPa
@Shear Rate 500 1/s,
Temperature 275 °C		 35.5 psi
@Shear Rate 500 1/s,
Temperature 527 °F		 ISO 11403-1 -2
Secant Modulus   0.402 GPa
@Strain 12.1 %,
Temperature 40.0 °C		 58.4 ksi
@Strain 12.1 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  0.59933 GPa
@Strain 8.96 %,
Temperature 23.0 °C		 86.927 ksi
@Strain 8.96 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  0.711 GPa
@Strain 10.6 %,
Temperature 0.000 °C		 103 ksi
@Strain 10.6 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  0.825 GPa
@Strain 3.03 %,
Temperature 40.0 °C		 120 ksi
@Strain 3.03 %,
Temperature 104 °F		 50%RH; ISO 11403-1 -2
  1.32 GPa
@Strain 5.32 %,
Temperature 0.000 °C		 191 ksi
@Strain 5.32 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  1.34 GPa
@Strain 2.24 %,
Temperature 23.0 °C		 194 ksi
@Strain 2.24 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1.34 GPa
@Strain 5.56 %,
Temperature -20.0 °C		 194 ksi
@Strain 5.56 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  2.94 GPa
@Strain 1.26 %,
Temperature 40.0 °C		 426 ksi
@Strain 1.26 %,
Temperature 104 °F		 DAM; ISO 11403-1 -2
  3.15 GPa
@Strain 2.80 %,
Temperature 23.0 °C		 457 ksi
@Strain 2.80 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  3.54 GPa
@Strain 2.88 %,
Temperature 0.000 °C		 514 ksi
@Strain 2.88 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  3.61 GPa
@Strain 1.33 %,
Temperature 0.000 °C		 523 ksi
@Strain 1.33 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  3.76 GPa
@Strain 1.39 %,
Temperature -20.0 °C		 546 ksi
@Strain 1.39 %,
Temperature -4.00 °F		 50%RH; ISO 11403-1 -2
  3.92 GPa
@Strain 2.88 %,
Temperature -20.0 °C		 569 ksi
@Strain 2.88 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  5.04 GPa
@Strain 1.40 %,
Temperature 23.0 °C		 731 ksi
@Strain 1.40 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  5.70 GPa
@Strain 1.44 %,
Temperature 0.000 °C		 827 ksi
@Strain 1.44 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  6.38 GPa
@Strain 1.44 %,
Temperature -20.0 °C		 926 ksi
@Strain 1.44 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
  7.74 GPa
@Strain 0.350 %,
Temperature 23.0 °C		 1120 ksi
@Strain 0.350 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  8.67 GPa
@Strain 0.360 %,
Temperature 0.000 °C		 1260 ksi
@Strain 0.360 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  9.39 GPa
@Strain 0.360 %,
Temperature -20.0 °C		 1360 ksi
@Strain 0.360 %,
Temperature -4.00 °F		 DAM; ISO 11403-1 -2
Izod Impact, Notched (ISO)  5.50 kJ/m² 2.62 ft-lb/in² DAM; ISO 180/1A
  9.00 kJ/m² 4.28 ft-lb/in² 50%RH; ISO 180/1A
  4.00 kJ/m²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 180/1A
  4.00 kJ/m²
@Temperature -40.0 °C		 1.90 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 180/1A
  4.50 kJ/m²
@Temperature -30.0 °C		 2.14 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 180/1A
Charpy Impact Unnotched  13.0 J/cm² 61.9 ft-lb/in² DAM; ISO 179/1eU
  NB NB 50%RH; ISO 179/1eU
  8.00 J/cm²
@Temperature -30.0 °C		 38.1 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
  8.00 J/cm²
@Temperature -30.0 °C		 38.1 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
Charpy Impact, Notched  0.600 J/cm² 2.86 ft-lb/in² DAM; ISO 179/1eA
  0.900 J/cm² 4.28 ft-lb/in² 50%RH; ISO 179/1eA
  0.400 J/cm²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eA
  0.500 J/cm²
@Temperature -30.0 °C		 2.38 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
Tensile Creep Modulus, 1 hour   833 MPa
@Pressure 12.0 MPa,
Temperature 100 °C		 121000 psi
@Pressure 1740 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  871 MPa
@Pressure 10.0 MPa,
Temperature 100 °C		 126000 psi
@Pressure 1450 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  900 MPa
@Pressure 8.00 MPa,
Temperature 100 °C		 131000 psi
@Pressure 1160 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  924 MPa
@Pressure 6.00 MPa,
Temperature 100 °C		 134000 psi
@Pressure 870 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  942 MPa
@Pressure 4.00 MPa,
Temperature 100 °C		 137000 psi
@Pressure 580 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  953 MPa
@Pressure 2.00 MPa,
Temperature 100 °C		 138000 psi
@Pressure 290 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  1180 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 172000 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1240 MPa
@Pressure 10.0 MPa,
Temperature 80.0 °C		 180000 psi
@Pressure 1450 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1260 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 182000 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1294.5 MPa
@Pressure 8.00 MPa,
Temperature 80.0 °C		 187750 psi
@Pressure 1160 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1310 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 190000 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1330 MPa
@Pressure 6.00 MPa,
Temperature 80.0 °C		 193000 psi
@Pressure 870 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1340 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 195000 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1350 MPa
@Pressure 4.00 MPa,
Temperature 80.0 °C		 196000 psi
@Pressure 580 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1370 MPa
@Pressure 2.00 MPa,
Temperature 80.0 °C		 199000 psi
@Pressure 290 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1810 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 263000 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1860 MPa
@Pressure 14.0 MPa,
Temperature 23.0 °C		 269000 psi
@Pressure 2030 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1960 MPa
@Pressure 12.0 MPa,
Temperature 23.0 °C		 284000 psi
@Pressure 1740 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2050 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 298000 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2120 MPa
@Pressure 8.00 MPa,
Temperature 23.0 °C		 307000 psi
@Pressure 1160 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2150 MPa
@Pressure 6.00 MPa,
Temperature 23.0 °C		 312000 psi
@Pressure 870 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2170 MPa
@Pressure 4.00 MPa,
Temperature 23.0 °C		 315000 psi
@Pressure 580 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2180 MPa
@Pressure 2.00 MPa,
Temperature 23.0 °C		 316000 psi
@Pressure 290 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2170 MPa
@Time 3600 sec		 315000 psi
@Time 1.00 hour		 50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours   609 MPa
@Pressure 12.0 MPa,
Temperature 100 °C		 88300 psi
@Pressure 1740 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  634.8 MPa
@Pressure 10.0 MPa,
Temperature 100 °C		 92070 psi
@Pressure 1450 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  659 MPa
@Pressure 8.00 MPa,
Temperature 100 °C		 95600 psi
@Pressure 1160 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  674 MPa
@Pressure 6.00 MPa,
Temperature 100 °C		 97800 psi
@Pressure 870 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  688 MPa
@Pressure 4.00 MPa,
Temperature 100 °C		 99700 psi
@Pressure 580 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  697 MPa
@Pressure 2.00 MPa,
Temperature 100 °C		 101000 psi
@Pressure 290 psi,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  778.21 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 112870 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  780 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 113000 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  781.25 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 113310 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  782 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 113000 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  877 MPa
@Pressure 10.0 MPa,
Temperature 80.0 °C		 127000 psi
@Pressure 1450 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  914 MPa
@Pressure 8.00 MPa,
Temperature 80.0 °C		 133000 psi
@Pressure 1160 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  943 MPa
@Pressure 6.00 MPa,
Temperature 80.0 °C		 137000 psi
@Pressure 870 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  961 MPa
@Pressure 4.00 MPa,
Temperature 80.0 °C		 139000 psi
@Pressure 580 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  973 MPa
@Pressure 2.00 MPa,
Temperature 80.0 °C		 141000 psi
@Pressure 290 psi,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1150 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 167000 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1170 MPa
@Pressure 14.0 MPa,
Temperature 23.0 °C		 170000 psi
@Pressure 2030 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1222 MPa
@Pressure 12.0 MPa,
Temperature 23.0 °C		 177200 psi
@Pressure 1740 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1310 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 190000 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1370 MPa
@Pressure 8.00 MPa,
Temperature 23.0 °C		 199000 psi
@Pressure 1160 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1380 MPa
@Pressure 6.00 MPa,
Temperature 23.0 °C		 200000 psi
@Pressure 870 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1390 MPa
@Pressure 4.00 MPa,
Temperature 23.0 °C		 202000 psi
@Pressure 580 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1420 MPa
@Pressure 2.00 MPa,
Temperature 23.0 °C		 206000 psi
@Pressure 290 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1400 MPa
@Time 3.60e+6 sec		 203000 psi
@Time 1000 hour		 50%RH; ISO 899-1
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+11 ohm-cm 1.00e+11 ohm-cm 50%RH; IEC 60093
Surface Resistance  1.00e+14 ohm 1.00e+14 ohm 50%RH; IEC 60093
Dielectric Constant   3.6
@Frequency 1.00e+6 Hz		 3.6
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  4.3
@Frequency 100 Hz		 4.3
@Frequency 100 Hz		 DAM; IEC 60250
  4.5
@Frequency 1.00e+6 Hz		 4.5
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  12.6
@Frequency 100 Hz		 12.6
@Frequency 100 Hz		 50%RH; IEC 60250
Dielectric Strength  27.0 kV/mm 686 kV/in 50%RH; IEC 60243-1
  36.0 kV/mm 914 kV/in DAM; IEC 60243-1
Dissipation Factor   0.012
@Frequency 100 Hz		 0.012
@Frequency 100 Hz		 DAM; IEC 60250
  0.024
@Frequency 1.00e+6 Hz		 0.024
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  0.075
@Frequency 1.00e+6 Hz		 0.075
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  0.44
@Frequency 100 Hz		 0.44
@Frequency 100 Hz		 50%RH; IEC 60250
Comparative Tracking Index  550 V 550 V DAM; IEC 60112
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  85.0 µm/m-°C 47.2 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  85.0 µm/m-°C 47.2 µin/in-°F DAM; ISO 11359-1/-2
Specific Heat Capacity  1.90 J/g-°C 0.454 BTU/lb-°F  
Thermal Conductivity  0.270 W/m-K 1.87 BTU-in/hr-ft²-°F of melt
Melting Point  256 °C 493 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  220 °C 428 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  110 °C 230 °F DAM; ISO 75-1/-2
Vicat Softening Point  235 °C 455 °F DAM; 50°C/h 50N; ISO 306
Flammability, UL94   HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 DAM; IEC 60695-11-10
  HB
@Thickness 0.800 mm		 HB
@Thickness 0.0315 in		 DAM; IEC 60695-11-10
 
Descriptive Properties
Additives Release agent  
Delivery form Pellets  
Emission of organic compounds 4.6 µgC/g VDA 277
Odour class 3.5 VDA 270
Part Marking Code >PA66-IMD40< ISO 11469
Processing Injection Moulding  
Regional Availability Europe  
  Near East/Africa  
Resin Identification PA66-IMD40  
Special characteristics Heat stabilised or stable to heat  
UL recognition UL DAM

概述

PA塑料(尼龙，聚酰胺)，英文名称:Polyamide

PA的品种繁多，有PA6、PA66、PAll、PAl2、PA46、PA610、PA612、PAl010等，以及近几年开发的半芳香族尼龙PA6T和特种尼龙等很多新品种。

物理性能

比重：PA6 1.14克/立方厘米，PA66 1.15克/立方厘米，PA1010 1.05克/立方厘米

成型收缩率：PA6 0.8-2.5% ，PA66 1.5-2.2%

成型温度：220-300℃

干燥条件：100-110℃/12小时

坚韧、耐磨、耐油、,耐水、抗酶菌、但吸水大

燃烧鉴别方法：火焰上端黄色，下端蓝色，燃烧后塑料熔滴落，起泡，离火后特殊的羊毛，指甲烧焦味和带芹菜味

尼龙6：

弹性好，冲击强度，吸水较大

尼龙66：

性能优于尼龙6，强度高，耐磨性好

尼龙610：

与尼龙66相似，但吸水小，刚度低

尼龙1010：

半透明，吸水小。耐寒性较好。适于制作一般机械零件、减磨耐磨零件、传动零件以及化工、电器、仪表等零件

成型性能

1、结晶料，熔点较高，熔融温度范围窄，热稳定性差，料温超过300度、滞留时间超过30分钟即分解。较易吸湿，需干燥，含水量不得超过0.3%。

2、流动性好，易溢料。宜用自锁时喷嘴，并应加热。

3、成型收缩范围及收缩率大，方向性明显，易发生缩孔、变形等。

4、模温按塑件壁厚在20～90度范围内选取，注射压力按注射机类型、料温、塑件形状尺寸、模具浇注系统选定，成型周期按塑件壁厚选定。树脂粘度小时，注射、冷却时间应取长，并用白油作脱模剂。

5、模具浇注系统的形式和尺寸，增大流道和浇口尺寸可减少缩水。

聚酰胺的不足之处在于：由于热膨胀和吸水性所至的尺寸精度不够，耐酸性差，硬度和弹性模量不够。经改良以后，也是比较优秀的工程塑料之一。

应用

汽车制造方面

用于制造燃料滤网、燃料过滤器、罐、捕集器、储油槽、发动机汽缸盖罩、散热器水缸、平衡旋转轴齿轮。也可用在汽车的电器配件、接线柱等。另外，它还可用作驱动、控制部件等。

电器电子工业

可用于制造电饭锅、电动吸尘器、高频电子食品加热器，电器产品的接线柱、开关和电阻器等。

医疗器械仪器

用于医用输血管、取血器、输液器等。PA单丝可做外科手术缝线、假发等；另外，电子打字机的数字旋转盘、接线柱、传动齿轮、印刷机的带式过滤片等。

其它方面

用于制作一次性打火机体、碱性干电池衬垫，摩托车驾驶员的头盔，办公机器外壳，办公用椅的角轮、座和靠背，冰鞋、钓鱼线等，PA薄膜气体阻隔性能优良，而且耐油性、耐低温冲击性、耐穿透性好，可用于肉、火腿肠等冷冻食品的包装。聚酰胺还可棒材和板材，也作齿轮或其它传动装置。

上海浩铭塑胶有限公司！本公司承诺，所有产品都是原厂家，原包装一线独家营销！

可提供以下报告：COA（产地证明）SGS（检测报告）MSDS（成分报告）FDA（食品安全报告）UL黄卡（出口报告）正规发票！欢迎新老客户来电咨询：

联系人：邓小姐

联系电话：13917657923

联系QQ:996152797

联系邮箱：996152797@qq.com

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-39748.html

免责声明: 本文 PA66/美国杜邦/11C140 NC010阻燃本色耐高温 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4