塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. 杜邦高性能聚合物SO653 NC010/20%玻璃微珠填充

杜邦高性能聚合物SO653 NC010/20%玻璃微珠填充

杜邦高性能聚合物的®SO653 NC010聚对苯二甲酸丁二醇酯（PBT） 类别：聚合物；热塑性；聚酯，TP；聚对苯二甲酸丁二醇酯（PBT）；聚对苯二甲酸丁二醇酯（PBT），20%玻璃微珠填充 材料说明：20%玻璃微珠填充聚对苯二甲酸乙二醇酯和低翘曲的特点 03的NC010是20%玻璃微珠填充聚对苯二甲酸乙二醇酯树脂注塑成型。它具有各向同性性能和低翘曲的特点。
物性表;

 
Physical Properties Metric English Comments
Density  1.25 g/cc 0.0452 lb/in³  
  1.45 g/cc 0.0524 lb/in³ ISO 1183
Water Absorption  0.35 %
@Thickness 2.00 mm		 0.35 %
@Thickness 0.0787 in		 Sim. to ISO 62
Moisture Absorption  0.200 %
@Thickness 2.00 mm		 0.200 %
@Thickness 0.0787 in		 Sim. to ISO 62
Viscosity   157000 cP
@Shear Rate 5000 1/s,
Temperature 260 °C		 157000 cP
@Shear Rate 5000 1/s,
Temperature 500 °F		 ISO 11403-1 -2
  193000 cP
@Shear Rate 5000 1/s,
Temperature 250 °C		 193000 cP
@Shear Rate 5000 1/s,
Temperature 482 °F		 ISO 11403-1 -2
  241000 cP
@Shear Rate 5000 1/s,
Temperature 240 °C		 241000 cP
@Shear Rate 5000 1/s,
Temperature 464 °F		 ISO 11403-1 -2
  408000 cP
@Shear Rate 500 1/s,
Temperature 260 °C		 408000 cP
@Shear Rate 500 1/s,
Temperature 500 °F		 ISO 11403-1 -2
  530000 cP
@Shear Rate 500 1/s,
Temperature 250 °C		 530000 cP
@Shear Rate 500 1/s,
Temperature 482 °F		 ISO 11403-1 -2
  692000 cP
@Shear Rate 500 1/s,
Temperature 240 °C		 692000 cP
@Shear Rate 500 1/s,
Temperature 464 °F		 ISO 11403-1 -2
Linear Mold Shrinkage, Flow  0.018 cm/cm 0.018 in/in ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.016 cm/cm 0.016 in/in ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  47.0 MPa 6820 psi ISO 527-1/-2
Tensile Stress   5.00 MPa
@Strain 0.160 %,
Time 3600 sec		 725 psi
@Strain 0.160 %,
Time 1.00 hour		 isochronous; ISO 11403-1 -2
  5.00 MPa
@Strain 0.175 %,
Time 36000 sec		 725 psi
@Strain 0.175 %,
Time 10.0 hour		 isochronous; ISO 11403-1 -2
  5.00 MPa
@Strain 0.177 %,
Time 360000 sec		 725 psi
@Strain 0.177 %,
Time 100 hour		 isochronous; ISO 11403-1 -2
  5.00 MPa
@Strain 0.210 %,
Time 3.60e+6 sec		 725 psi
@Strain 0.210 %,
Time 1000 hour		 isochronous; ISO 11403-1 -2
Elongation at Break  10 % 10 % ISO 527-1/-2
Tensile Modulus  3.50 GPa 508 ksi ISO 527-1/-2
Flexural Strength  90.0 MPa 13100 psi ISO 178
Shear Modulus   0.120 GPa
@Temperature 160 °C		 17.4 ksi
@Temperature 320 °F		 Dynamic; ISO 11403-1 -2
  0.191 GPa
@Temperature 120 °C		 27.7 ksi
@Temperature 248 °F		 Dynamic; ISO 11403-1 -2
  0.419 GPa
@Temperature 70.0 °C		 60.8 ksi
@Temperature 158 °F		 Dynamic; ISO 11403-1 -2
  1.17 GPa
@Temperature 20.0 °C		 170 ksi
@Temperature 68.0 °F		 Dynamic; ISO 11403-1 -2
  1.31 GPa
@Temperature -20.0 °C		 190 ksi
@Temperature -4.00 °F		 Dynamic; ISO 11403-1 -2
  1.43 GPa
@Temperature -50.0 °C		 207 ksi
@Temperature -58.0 °F		 Dynamic; ISO 11403-1 -2
Izod Impact, Notched (ISO)  3.50 kJ/m² 1.67 ft-lb/in² ISO 180/1A
  4.00 kJ/m²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 ISO 180/1A
Izod Impact, Unnotched (ISO)  37.0 kJ/m² 17.6 ft-lb/in² ISO 180/1U
  34.0 kJ/m²
@Temperature -30.0 °C		 16.2 ft-lb/in²
@Temperature -22.0 °F		 ISO 180/1U
Charpy Impact Unnotched  4.00 J/cm² 19.0 ft-lb/in² ISO 179/1eU
  5.00 J/cm²
@Temperature -30.0 °C		 23.8 ft-lb/in²
@Temperature -22.0 °F		 ISO 179/1eU
Charpy Impact, Notched  0.350 J/cm² 1.67 ft-lb/in² ISO 179/1eA
  0.350 J/cm²
@Temperature -30.0 °C		 1.67 ft-lb/in²
@Temperature -22.0 °F		 ISO 179/1eA
Tensile Creep Modulus, 1 hour  2870 MPa
@Pressure 25.0 MPa,
Temperature 23.0 °C		 417000 psi
@Pressure 3630 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  2920 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 423000 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  2970 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 431000 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  3050 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 442000 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  3125 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 453200 psi
@Pressure 725 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  3500 MPa
@Time 3600 sec		 508000 psi
@Time 1.00 hour		 ISO 899-1
Tensile Creep Modulus, 1000 hours  1500 MPa
@Pressure 25.0 MPa,
Temperature 23.0 °C		 217000 psi
@Pressure 3630 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  1640 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 238000 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  1870 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 271000 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  2170 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 315000 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  2380 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 345000 psi
@Pressure 725 psi,
Temperature 73.4 °F		 ISO 11403-1 -2
  2400 MPa
@Time 3.60e+6 sec		 348000 psi
@Time 1000 hour		 ISO 899-1
 
Electrical Properties Metric English Comments
Volume Resistivity  >= 1.00e+15 ohm-cm >= 1.00e+15 ohm-cm IEC 60093
Dielectric Constant  3.7
@Frequency 1.00e+6 Hz		 3.7
@Frequency 1.00e+6 Hz		 IEC 60250
  4.0
@Frequency 100 Hz		 4.0
@Frequency 100 Hz		 IEC 60250
Dielectric Strength  25.0 kV/mm 635 kV/in IEC 60243-1
Dissipation Factor 0.0090
@Frequency 100 Hz		 0.0090
@Frequency 100 Hz		 IEC 60250
  0.016
@Frequency 1.00e+6 Hz		 0.016
@Frequency 1.00e+6 Hz		 IEC 60250
Comparative Tracking Index  250 V 250 V IEC 60112
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  110 µm/m-°C 61.1 µin/in-°F ISO 11359-1/-2
CTE, linear, Transverse to Flow  110 µm/m-°C 61.1 µin/in-°F ISO 11359-1/-2
Specific Heat Capacity  1.85 J/g-°C 0.442 BTU/lb-°F  
Thermal Conductivity  0.250 W/m-K 1.74 BTU-in/hr-ft²-°F of melt
Melting Point  225 °C 437 °F 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  165 °C 329 °F ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  65.0 °C 149 °F ISO 75-1/-2
Vicat Softening Point  195 °C 383 °F 50°C/h 50N; ISO 306
Flammability, UL94   HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 IEC 60695-11-10
  HB
@Thickness 0.800 mm		 HB
@Thickness 0.0315 in		 IEC 60695-11-10
Flame Spread  24 mm/min
@Thickness 1.00 mm		 0.94 in/min
@Thickness 0.0394 in		 SE/B; ISO 3795 (FMVSS 302)
Oxygen Index  22 % 22 % ISO 4589-1/-2
 
Descriptive Properties
Additives Release agent  
Delivery form Pellets  
Part Marking Code >PBT-GB20< ISO 11469
Processing Injection Moulding  
Regional Availability Asia Pacific  
  Europe  
  Global  
  Near East/Africa  
  North America  
  South and Central America  
Resin Identification PBT-GB20  
UL recognition UL
图：

上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
欢迎新老客户来电或QQ咨询：
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-40940.html

免责声明: 本文 杜邦高性能聚合物SO653 NC010/20%玻璃微珠填充 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4