| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.42 g/cc | 0.0513 lb/in³ | ISO 1183 | ||
| Filler Content | 15 % | 15 % | |||
| Linear Mold Shrinkage, Flow | 0.0050 cm/cm | 0.0050 in/in | ISO 294-4 | ||
| Linear Mold Shrinkage, Transverse | 0.012 cm/cm | 0.012 in/in | ISO 294-4 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 110 MPa @Temperature 23.0 °C |
16000 psi @Temperature 73.4 °F |
ISO 527 | ||
| Elongation at Break | 3.3 % @Temperature 23.0 °C |
3.3 % @Temperature 73.4 °F |
ISO 527 | ||
| Tensile Modulus | 5.90 GPa @Temperature 23.0 °C |
856 ksi @Temperature 73.4 °F |
ISO 527 | ||
| Charpy Impact Unnotched | 2.70 J/cm² @Temperature 23.0 °C |
12.8 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eU | ||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 224 °C | 435 °F | 10°C/min; ISO 11357-1/-3 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 201 °C | 394 °F | ISO 75-1/-2 | ||
| Processing Properties | Metric | English | Comments | ||
| Melt Temperature | 240 °C | 464 °F | Optimum; Injection Molding | ||
| 235 - 260 °C | 455 - 500 °F | Injection Molding | |||
| Mold Temperature | 80.0 °C | 176 °F | Optimum; Injection Molding | ||
| 30.0 - 130 °C | 86.0 - 266 °F | Injection Molding | |||
| Drying Temperature | 110 - 130 °C | 230 - 266 °F | Injection Molding | ||
| Dry Time | 2.00 - 4.00 hour | 2.00 - 4.00 hour | Dehumidified Dryer; Injection Molding | ||
| Moisture Content | <= 0.040 % | <= 0.040 % | Injection Molding | ||
| De |
|||||
| Appearance | Black Color | ||||
| Drying Recommended | Yes | Injection Molding | |||
| Features | Flow, High | ||||
| Laser markable | |||||
| Molding Cycle, Fast | |||||
| Viscosity, Low | |||||
| Filler | Glass fiber | ||||
| Generic | PBT | ||||
| Material Status | Preliminary Data | ||||
| Part Marking Code | >PBT-GF15< | ISO 11469 | |||
| Processing Method | Injection Molding | ||||
| Product Category | Glass Reinforced Resins | ||||
| Region Available - Americas | Yes | ||||
| Region Available - Asia/Pacific | Yes | ||||
| Region Available - Europe | Yes | ||||
| Resin Identification | PBT-GF15 | ISO 1043 | |||
| RoHS Compliance | Contact Manufacturer | ||||
上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
欢迎新老客户来电或QQ咨询：
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com