Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Specific Gravity | 1.45 g/cc | 1.45 g/cc | |||
Water Absorption | 0.050 % @Time 86400 sec |
0.050 % @Time 24.0 hour |
|||
Linear Mold Shrinkage, Flow | 0.0011 cm/cm | 0.0011 in/in | 410°C nozzle, 220°C mold | ||
Linear Mold Shrinkage, Transverse | 0.0050 cm/cm | 0.0050 in/in | 410°C nozzle, 220°C mold | ||
Crystallinity | 40 % | 40 % | DSC | ||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Rockwell M | 106 | 106 | ASTM D785 | ||
Hardness, Shore D | 91 | 91 | |||
Tensile Strength at Break | 45.0 MPa @Temperature 250 °C |
6530 psi @Temperature 482 °F |
ASTM D638 | ||
55.0 MPa @Temperature 200 °C |
7980 psi @Temperature 392 °F |
ASTM D638 | |||
80.0 MPa @Temperature 150 °C |
11600 psi @Temperature 302 °F |
ASTM D638 | |||
120 MPa @Temperature 100 °C |
17400 psi @Temperature 212 °F |
ASTM D638 | |||
130 - 135 MPa @Temperature 23.0 °C |
18900 - 19600 psi @Temperature 73.4 °F |
ASTM D638 | |||
145 MPa @Temperature -10.0 °C |
21000 psi @Temperature 14.0 °F |
ASTM D638 | |||
160 MPa @Temperature -50.0 °C |
23200 psi @Temperature -58.0 °F |
ASTM D638 | |||
Elongation at Break | 1.5 - 2.0 % | 1.5 - 2.0 % | ASTM D638 | ||
Tensile Modulus | 11.5 GPa | 1670 ksi | ASTM D638 | ||
Flexural Strength | 210 MPa | 30500 psi | ASTM D790 | ||
Flexural Modulus | 10.5 GPa | 1520 ksi | ASTM D790 | ||
Izod Impact, Notched | 0.400 - 0.450 J/cm | 0.749 - 0.843 ft-lb/in | ASTM D256 | ||
Izod Impact, Unnotched | 6.10 J/cm | 11.4 ft-lb/in | ASTM D256 | ||
Thermal Properties | Metric | English | Comments | ||
Melting Point | 370 - 372 °C | 698 - 702 °F | DSC | ||
Deflection Temperature at 1.8 MPa (264 psi) | 368 °C | 694 °F | |||
Glass Transition Temp, Tg | 152 - 154 °C | 306 - 309 °F | DSC/onset | ||
Flammability, UL94 | V-0 @Thickness 0.800 mm |
V-0 @Thickness 0.0315 in |
|||
Processing Properties | Metric | English | Comments | ||
Processing Temperature | 390 - 425 °C | 734 - 797 °F | |||
Nozzle Temperature | 425 °C | 797 °F | |||
Mold Temperature | 200 - 220 °C | 392 - 428 °F | |||
Drying Temperature | 150 °C | 302 °F | |||
Dry Time | 4 - 6 hour | 4 - 6 hour | |||
De |
|||||
Hopper/ Throat Temperature | 60-80°C |
上海松翰塑化科技有限公司!本公司承诺,假一赔百!所有产品都是原厂家,原包装一线独家营销!
我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
欢迎新老客户来电或QQ咨询:
联系人:李生
联系电话;13636696005
联系QQ;1020580970
联系邮箱;1020580970@qq.com