VESTAMID® L-R3-MHI blk (sw)|PA12-I|Evonik Industries物性表报告及物性特性介绍,VESTAMID® L-R3-MHI blk (sw)|PA12-I|Evonik Industries注塑参数详情-塑料物性表查询网

Product TextsVESTAMID® L-R3-MHI blk The electrical 4	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.6	%	ISO 294-4, 2577

[tr][/tr][tr][/tr]

机械性能(机械性能(Mechanical properties))

值(Value)

单位(Unit)

测试标准(Test Standard)

ISO数据(ISO数据(CAMPUS/ISO) Data)

拉伸模量(Tensile Modulus)

1600

MPa

ISO 527-1/-2

屈服应力(Yield stress)

MPa

ISO 527-1/-2

屈服应变(Yield strain)

ISO 527-1/-2

断裂拉伸应变(Nominal strain at break)

>50

ISO 527-1/-2

简支梁冲击强度(Charpy impact strength) (+23°C)

kJ/m²

ISO 179/1eU

简支梁冲击强度(Charpy impact strength) (-30°C)

kJ/m²

ISO 179/1eU

简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)

55[P]

kJ/m²

ISO 179/1eA

简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)

kJ/m²

ISO 179/1eA

Partial Break

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	178	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	50	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	130	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	140	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	180	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	170	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6	mm	IEC 60695-11-10
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度测试(Thickness tested)	3.2	mm	IEC 60695-11-10

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
体积电阻率(Volume resistivity)	100	Ohm*m	IEC 60093

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.5	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.8	%	Sim. to ISO 62
密度(Density)	1100	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	940	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.16	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	2550	J/(kg K)	-
喷射温度(Ejection temperature)	180	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	270	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

Diagrams1 % The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer duringISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] 4 Brake fluid (120°C)[/td][/tr][tr][td] .
[/td][/tr][/table]