HOSTAFORM S 27063 XAP|POM|Ticona物性表报告及物性特性介绍,HOSTAFORM S 27063 XAP|POM|Ticona注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	20	cm³/10min	ISO 1133
温度(Temperature)	190	°C	ISO 1133
负载(Load)	2.16	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	1.9	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.8	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2200	MPa	ISO 527-1/-2
屈服应力(Yield stress)	54	MPa	ISO 527-1/-2
屈服应变(Yield strain)	9	%	ISO 527-1/-2
断裂拉伸应变(Nominal strain at break)	30	%	ISO 527-1/-2
Tensile creep modulus (1h)	1850	MPa	ISO 899-1
Tensile creep modulus (1000h)	1050	MPa	ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)	140	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	90	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	9	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	6	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	166	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	84	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	140	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	120	E-6/K	ISO 11359-1/-2

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	4.2	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	4.2	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	50	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	150	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E11	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	1E13	Ohm	IEC 60093
电气强度(Electric strength)	28	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	600	-	IEC 60112

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.65	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1390	kg/m³	ISO 1183

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Processing conditions acc. ISO	9990	-	ISO ....-2
Injection Molding, melt temperature	205	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	90	MPa	ISO 294

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesRelease agentRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.