Ultramid® A3X3G5|PA66-GF25|BASF物性表报告及物性特性介绍,Ultramid® A3X3G5|PA66-GF25|BASF注塑参数详情-塑料物性表查询网

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	40 / *	cm³/10min	ISO 1133
温度(Temperature)	275 / *	°C	ISO 1133
负载(Load)	5 / *	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	8500 / 6000	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	140 / 100	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	3 / 4.5	%	ISO 527-1/-2
Tensile creep modulus (1000h)	* / 3500	MPa	ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)	70 / 75	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	65 / -	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	13 / 18	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	7100 / -	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	11 / 17	kJ/m²	ISO 180/1A

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
熔化温度(熔化温度(Melting temperature)) (10°C/min)	260 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	250 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	250 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	30 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	70 / *	E-6/K	ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn.	V-1 / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6 / *	mm	IEC 60695-11-10

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
相对介电常数(Relative permittivity) (1MHz)	3.7 / 5	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	200 / 1000	E-4	IEC 60250
体积电阻率(Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E10	Ohm	IEC 60093
电气强度(Electric strength)	33 / 30	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	575 / -	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
吸水率(Water absorption)	6 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	1.4 / *	%	Sim. to ISO 62
密度(Density)	1340 / -	kg/m³	ISO 1183

材料特殊性能(Material specific properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据
粘数(Viscosity number)	140 / *	cm³/g	ISO 307, 1157, 1628

CharacteristicsProcessingInjection Molding, Other ExtrusionDelivery formPelletsAdditivesFlame retarding agentSpecial CharacteristicsFlame retardantApplicationsAutomotiveRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base .