Overview of materials for Acrylic, Cast

Overview of materials for Acrylic, Cast 物性表: Overview of materials for Acrylic, Cast物性表及特性介绍,Overview of materials for Acrylic, Cast注塑参数详情,如需Overview of materials for Acrylic, Cast下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.18
  • 吸水率 [%]: 0.13
  • 缺口冲击强度: 1.6
  • 断裂伸长率 [%]: 105
  • 弯曲强度 [MPa]: 62.0
  • 弯曲模量 [MPa]: 2.96
  • 热变形温度 [℃]: 113.0
  • 透光率 [%]: 89.0
 
Physical PropertiesMetricEnglishComments
Density 1.18 - 1.19 g/cc0.0426 - 0.0430 lb/in³Average value: 1.19 g/cc Grade Count:10
Water Absorption 0.130 - 0.480 %0.130 - 0.480 %Average value: 0.296 % Grade Count:8
Water Absorption at Saturation 1.10 - 2.10 %1.10 - 2.10 %Average value: 1.90 % Grade Count:5
Moisture Expansion 0.500 %0.500 %Average value: 0.500 % Grade Count:3
Moisture Vapor Transmission 55.0 cc-mm/m²-24hr-atm140 cc-mil/100 in²-24hr-atmAverage value: 55.0 cc-mm/m²-24hr-atm Grade Count:3
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 94.0 - 10294.0 - 102Average value: 98.2 Grade Count:3
Ball Indentation Hardness 175 MPa25400 psiAverage value: 175 MPa Grade Count:3
Tensile Strength, Ultimate 62.0 - 83.0 MPa8990 - 12000 psiAverage value: 77.0 MPa Grade Count:10
 40.0 - 110 MPa
@Temperature -40.0 - 70.0 °C
5800 - 16000 psi
@Temperature -40.0 - 158 °F
Average value: 75.0 MPa Grade Count:3
Elongation at Break 4.00 - 5.50 %4.00 - 5.50 %Average value: 5.02 % Grade Count:9
Modulus of Elasticity 2.80 - 3.30 GPa406 - 479 ksiAverage value: 3.17 GPa Grade Count:4
Flexural Yield Strength 105 - 116 MPa15200 - 16800 psiAverage value: 113 MPa Grade Count:6
Flexural Modulus 2.96 - 3.30 GPa429 - 479 ksiAverage value: 3.16 GPa Grade Count:3
Compressive Yield Strength 110 - 124 MPa16000 - 18000 psiAverage value: 114 MPa Grade Count:4
Poissons Ratio 0.3700.370Average value: 0.370 Grade Count:3
Shear Modulus 1.70 GPa247 ksiAverage value: 1.70 GPa Grade Count:3
Izod Impact, Notched (ISO) 1.60 kJ/m²0.761 ft-lb/in²Average value: 1.60 kJ/m² Grade Count:3
Charpy Impact Unnotched 1.20 - 2.17 J/cm²5.71 - 10.3 ft-lb/in²Average value: 1.57 J/cm² Grade Count:5
Coefficient of Friction 0.450 - 0.8000.450 - 0.800Average value: 0.583 Grade Count:3
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+15 - 1.60e+16 ohm-cm1.00e+15 - 1.60e+16 ohm-cmAverage value: 4.75e+15 ohm-cm Grade Count:4
Surface Resistance 5.00e+13 - 1.90e+15 ohm5.00e+13 - 1.90e+15 ohmAverage value: 5.12e+14 ohm Grade Count:4
Shielding Effectiveness 26.0 - 32.0 dB26.0 - 32.0 dBAverage value: 29.3 dB Grade Count:3
Dielectric Constant 2.70 - 3.602.70 - 3.60Average value: 3.14 Grade Count:4
Dielectric Strength 17.0 - 30.0 kV/mm432 - 762 kV/inAverage value: 26.8 kV/mm Grade Count:4
Dissipation Factor 0.0200 - 0.06000.0200 - 0.0600Average value: 0.0400 Grade Count:4
Comparative Tracking Index 600 V600 VAverage value: 600 V Grade Count:3
 
Thermal PropertiesMetricEnglishComments
CTE, linear 61.0 - 104 µm/m-°C33.9 - 57.8 µin/in-°FAverage value: 74.0 µm/m-°C Grade Count:8
Specific Heat Capacity 1.47 J/g-°C0.351 BTU/lb-°FAverage value: 1.47 J/g-°C Grade Count:6
Thermal Conductivity 0.190 W/m-K1.32 BTU-in/hr-ft²-°FAverage value: 0.190 W/m-K Grade Count:6
Maximum Service Temperature, Air 80.0 - 200 °C176 - 392 °FAverage value: 123 °C Grade Count:6
Deflection Temperature at 0.46 MPa (66 psi) 113 - 115 °C235 - 239 °FAverage value: 114 °C Grade Count:3
Deflection Temperature at 1.8 MPa (264 psi) 99.0 - 112 °C210 - 234 °FAverage value: 106 °C Grade Count:6
Vicat Softening Point 105 - 118 °C221 - 244 °FAverage value: 113 °C Grade Count:8
Flash Point 425 °C797 °FAverage value: 425 °C Grade Count:3
Shrinkage  1.50 - 1.50 %
@Temperature 160 - 160 °C
1.50 - 1.50 %
@Temperature 320 - 320 °F
Average value: 1.50 % Grade Count:1
 1.50 - 1.50 %
@Thickness 6.35 - 6.35 mm
1.50 - 1.50 %
@Thickness 0.250 - 0.250 in
Average value: 1.50 % Grade Count:1
 
Optical PropertiesMetricEnglishComments
Refractive Index 1.49 - 1.491.49 - 1.49Average value: 1.49 Grade Count:7
Haze 0.500 - 2.20 %0.500 - 2.20 %Average value: 1.06 % Grade Count:5
Transmission, Visible 89.0 - 92.0 %89.0 - 92.0 %Average value: 91.3 % Grade Count:9
UV Transmittance 0.000 - 1.00 %0.000 - 1.00 %Average value: 0.400 % Grade Count:5
Reflection Coefficient, Visible (0-1) 0.04000.0400Average value: 0.0400 Grade Count:3
 
Processing PropertiesMetricEnglishComments
Processing Temperature 80.0 - 193 °C176 - 379 °FAverage value: 134 °C Grade Count:4

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-29837.html

免责声明: 本文 Overview of materials for Acrylic, Cast 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4