Lucky IH-830 Acrylic, Injection Grade

Lucky IH-830 Acrylic, Injection Grade 物性表: Lucky IH-830 Acrylic, Injection Grade物性表及特性介绍,Lucky IH-830 Acrylic, Injection Grade注塑参数详情,如需Lucky IH-830 Acrylic, Injection Grade下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 2.3
  • 密度 [g/cm3]: 1.18
  • 断裂伸长率 [%]: 133
  • 弯曲强度 [MPa]: 74.0
  • 弯曲模量 [MPa]: 3.30
  • 透光率 [%]: 92.0
 
Physical PropertiesMetricEnglishComments
Density 1.18 g/cc0.0426 lb/in³ASTM D792
Linear Mold Shrinkage 0.0020 - 0.0060 cm/cm0.0020 - 0.0060 in/inASTM D955-51
Melt Flow 2.3 g/10 min2.3 g/10 minASTM D1238
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 9797ASTM D785
Tensile Strength, Ultimate 74.0 MPa10700 psiASTM D638
Elongation at Break 3.5 %3.5 %ASTM D638
Flexural Yield Strength 133 MPa19300 psiASTM D790
Flexural Modulus 3.30 GPa479 ksiASTM D790
 
Electrical PropertiesMetricEnglishComments
Dielectric Strength 20.0 kV/mm508 kV/inASTM D149
 
Thermal PropertiesMetricEnglishComments
Maximum Service Temperature, Air 98.0 °C208 °FHeat Distortion Temp
 98.0 °C208 °FDeflection Temp; Load not reported; ASTM D648
Vicat Softening Point 105 °C221 °FASTM D1525
Flammability, UL94  HB
@Thickness 1.60 mm
HB
@Thickness 0.0630 in
 HB
@Thickness 3.17 mm
HB
@Thickness 0.125 in
 
Optical PropertiesMetricEnglishComments
Refractive Index 1.491.49ASTM D542
Transmission, Visible 92 %92 %ASTM D1003

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-30210.html

免责声明: 本文 Lucky IH-830 Acrylic, Injection Grade 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4